Extreme Max 5001.5047 User manual

NARROW 1100 IB. MOTORCYLCE SCISSORS JACK
Part # 5001.5047

WARNING!
- Risk of personal injury or property damage.
- Jack capacity is 1100 lbs. Do not exceed jack capacity.
- Pinch hazard, keep clear of moving parts.
- Risk of load loss. Secure and stabilize load.
- Use lift only on solid, level surface.
- Inspect lift before each use, do not use lift if any components are damaged.
- Raise and lower lift following instructions given. Do not use an impact gun or other device to
raise or lower lift.
Intended for use as secondary lift for motorcycle maintenance. Use of this product for any other
purpose voids warranty
Operation:
1. Use handle to rotate screw and adjust platform height.
2. Position lift at the bottom of the motorcycle.
3. Align the center of the load with the pivot.
4. Keep load stabilized and lift.
5. Secure motorcycle before performing any maintenance work.
6. To lower lift, use the handle to slowly lower platform until it separates from the pivot.
7. Remove lift.
Maintenance:
Lubricate screw and nuts before use to minimize lift friction.
Store lift in lowest position in a dry area.

Parts List:
Name Qty.
(A) Platform 1
(B) M12x50 Bolt 2
(C) M12 Washer 10
(D) Saddle 2
(E) Adjustable Plate 2
(F) M10x25 Bolt 2
(G) Handle 1
(H) Lifting Screw 1
(I) Inner Fixing Spindle 1
(J) Spring Blockring 4
(K) Base Plate 1
(L) Outer Frame Roller 2
(M) M20 Washer 4
(N) Outer Lift Arm 1
(O) Connecting Pin 1
(P) Middle Bushing 1
(Q) Inner Frame Roller 2
(R) Inner Lift Arm 1
(S) Bearing 2
(T) Outer Fixing Spindle 1
(U) Fixing Nut 1
(V) M6 Lock Nut 1
(W) Removable Spindle 1
A
B
C
D
E
F
G
H
I
J
K L
M
N
O
P
Q
R
S
TUV
W

Customer Service Number: 651-357-1862
[email protected]
www.extrememax.com
2461ex1015