sPeCifiCAtions
viDeo
Gain ................................ 0 dB, 0.6 dB, 1.2 dB, selectable
(when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p)
Bandwidth ........................ 300 MHz (-3 dB)
NOTE: ID bits are terminated (pins 4 and 11).
viDeo inPut
Number / Signal type........... 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, component video,
HDTV component video
Connectors ....................... (1) 15-pin HD female
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance........................ 75 ohms
Horizontal frequency............ 15 kHz to 135 kHz
Vertical frequency............... 30 Hz to 170 Hz
Input coupling.................... DC
viDeo outPut
Number / Signal type........... 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, component video,
HDTV component video
Connectors ....................... 5 BNC female
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance........................ 75 ohms
DC offset .......................... ±5 mV with input at 0 offset
Return loss ....................... <-35 dB @ 5 MHz
synC
Input type ......................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync
Output type ....................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync
Input level ........................ 2.0 V to 5.0 Vp-p
Output level ...................... TTL: 5 Vp-p, unterminated
Input impedance ................ 510 ohms
Output impedance .............. 75 ohms
Max. propagation delay ........ 18.8 ns
Max. Rise / Fall time............ 4 ns
Polarity ............................ Positive or negative (follows input)
AuDio
Gain ................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ............ 20 Hz to 20 kHz, ±0.5 dB
THD + Noise...................... 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level
S/N ................................. >90 dB at rated maximum output
Stereo channel separation . . . . >75 dB @ 20 Hz to 20 kHz
AuDio inPut
Number / Signal type........... 1 stereo, unbalanced
Connectors ....................... (1) 3.5 mm mini stereo jack
Impedance........................ >10k ohms unbalanced, DC coupled
Nominal level .................... -10 dBV (316 mVrms)
Maximum level .................. +6 dBV, (unbalanced) at 1% THD+N
AuDio outPut
Number / Signal type........... 1 stereo, balanced/unbalanced
Connectors
Extender WM, Extender WM AAP,
Extender D......................... (1) 3.5 mm direct insertion captive screw connector, 5 pole
Extender AAP, Extender MK ...... (1) 3.5 mm captive screw connector, 5 pole
Impedance........................ 50 ohms unbalanced, 100 ohms balanced
Nominal level .................... -2 dBu, balanced; -10 dBV unbalanced
Maximum level (Hi-Z) ........... +14 dBu, balanced, at 1% THD+N
Maximum level (600 ohm) ..... +6 dBm, balanced, at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.
GenerAL
External power supply ......... 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 12 VDC,
1 A (max.), regulated
Power input requirements..... 12 VDC, 0.2 A
Temperature / Humidity........ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount
Extender AAP...................... No, but wall or furniture mountable with optional AAP mounting faceplates
All other models................... No, but wall or furniture mountable in a standard U.S. electrical wall box
Enclosure type ................... Metal (Extender D has a metal faceplate and a plastic Decora wall plate.)
Enclosure dimensions
Extender AAP
Faceplate .......................... 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
Buffer............................... 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D)
(*Height excludes BNC connectors and cables.)
Extender WM
Faceplate .......................... 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
Buffer............................... 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*)
(*Depth excludes BNC connectors and cables.)
Extender WM AAP
Faceplate .......................... 4.5" H x 6.4" W x 0.1" D (11.4 cm H x 16.3 cm W x 0.3 cm D) (3 gang)
Buffer............................... 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*)
(*Depth excludes BNC connectors and cables.)
Extender MK
Faceplate .......................... 3.4" H x 5.7" W (8.6 cm H x 14.4 cm W) (UK knockout box size)
Buffer............................... 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D)
(*Height excludes BNC connectors and cables.)
Extender D
Faceplate .......................... 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening
in a 1 gang Decora faceplate. *Height is 3.8” [9.7 cm] including mounting tabs.)
Buffer............................... 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*)
(*Depth excludes BNC connectors and cables.)
Product weight
Extender AAP...................... 0.2 lbs (0.1 kg)
Extender WM ...................... 0.2 lbs (0.1 kg)
Extender WM AAP................. 0.4 lbs (0.2 kg)
Extender MK....................... 0.5 lbs (0.3 kg)
Extender D......................... 0.2 lbs (0.1 kg)
Shipping weight
Extender AAP...................... 2 lb (1 kg)
All other models................... 3 lbs (2 kg)
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)
Listings............................ UL, CUL
Compliances ..................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................. 30,000 hours
Warranty .......................... 3 years parts and labor
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
Extender Wall Mount Series
line Drivers
510