EZ Goal 65121 User manual

8 x 75mm
8 x 30mm
6
65121
B875
B830
N80
252
252
65121
AP
Reorder side net #69108
Reorder targets #69101
#13
BACKSTOP KIT Targets For Kit AP
13-09 Page 1
Black Bungee 5" 9153
15
Bolts 6mm x 75mm
16
6
8014 4
8015 5
Butterfly Nuts 6mm
17
8mm

(I)
(E)
Bolt
Goal Backstop
Goal Backstop
Bu erfly
Nut
Bolt
8 x30mm8 x75mm
Figure 3 Bolting the side panels
If you have an Ezgoal Hockey net,
the holes are predrilled to secure
the side panels.
use (2) 75mm bolts and the 2 butterfly
nuts on the top two holes.
(2) 30mm bolts on the bottom two-holes .
Figure (E) & (I)
Figure 4 backstop top net connection
The thick black rope and label must be on top.(Detail F.) Using thin short rope corner ties, attach
the top net to the 4 corner steel loops. Secure the heavy main rope on one panel to the steel loop,
pull tight and secure the main rope to the oppositeside panel . See(Detail G.)and the front of the
color box. Repeat for the bottom rope ,Use the 5'ropes to the lace the top net to the side panels.
See detail (G) and Figure 4 . Use the 15"rope ,Tie bow knots, to secure the top net to the goal in a
few locations (Detail H .)
PS46252
PS46252
PS46252
PS46252
#69109 AP
65511
BACKSTOP KIT Targets For Kit AP
13-09 Page 2
If you have the 4x6 hockey Ezgoal goal with the 1 " ring on the front uprights ,see
figure (E), use page 2 to attach the backstop to the goal. For all other Ezgoals and goals
use page 3 to attach the backstop to the goal.
65121

65511 65121 instructions
BACKSTOP KIT 11.09.11 Rev. 7
3

123
Folding and storing:
Note: This Backstop is designed to fold up infront of goal
To do this you need to find the button on the bottom back
of the side uprights of the Ezgoal goal. Press the button in.
This will enable the ring on the goal to rotate to the front
of the goal with the backstop. See figure 5(1) (2) (3).
This will make it so you can swing the backstop infront of
the goal for storing.
Warning !!! Do not fold the backstop forward for storing
without pressing the button Step 2
Note: For a none Ezgoal goal that is bolted , you will need
to take the backstop off for storage.
See figure 5 (1) (2) (3).
Figure 6 . Fold panels forward, this will help stabilize
the unit in windy conditions. Note: never leave the unit
unattended within 10' from vehicles, boats, homes, or any
structure which may incur damage from the backstop or cause
damage to the backstop.
Ezgoal Storage
Patent Pending
Figure 6
BACK
SWINGS
FORWARD
REBOUNDING
gameplay or storage
Figure 5
65511
BACKSTOP KIT Targets For Kit AP
13-09
Page 4
Note: Only the 2013 Ezgoal with the
1" rings on the sides Fold in.
65121

Page 5
06-13

Page 6