EZ Goal MONSTER SPORTS PRO Series User manual
Page 1 03-85568 2017-08-21
INSTALLATION
INSTRUCTIONS
Please read instructions
COMPLETELY
before assembly.
DO NOT RETURN
PRODUCT TO THE
STORE
Missing parts,
need replacements, or
help with assembly
Please contact
Customer Service:
(+1) 203-591-9032
Waterbury, CT 06710 U.S.A.
#85568
8’X6’ PROFESSIONAL FOLDING
LACROSSE THROWBACK
Black rope
Left top bend tube
Right top bend tube
Bottom tube with slots
Straight tube
Left bottom frame of throwback
section
Right bottom frame of throwback
section
Rear support section
Bottom bent tube
Side tilting section
Folding section
Safety pull pin 70mm 2¾”
Pull pin 60mm
8mm folding section bolt
8mm self locking nut
Allen wrench
Wrench
Black bungee
Top net
Bottom net
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
17
18
19
6
3812668 101
3812668 102
3812668 103
1218
3812668 104
3812668 105
3812668 106
3812668 107
1425
1503
40532
4659
6010
008
018
017
9191
69156
69157
1
1
2
3
1
2
2
2
2
2
2
3
1
1
36+2
1
1
1
2
Skirt
20
15055 1
21
1
22
Bottom tube 1
1219
No. Illustration Description Part # Qty.
Page 2 03-85568 2017-08-21
FRAME ASSEMBLY
TWO PEOPLE ARE RECOMMENDED
FOR ASSEMBLY
NOTE: Precision connections will fit snugly. Use
a rubber mallet or block of wood if needed.
1. Connect the folding section and base
parts together using these parts:
1503, 103, 107 and 1219.
Refer to Figure A and make sure part
103 has the longer slot on top.
2. Connect parts 106, 1218 and 1425, to
make the Slide Tilting Assembly.
Make sure the holes on part 1425
are facing up.
3. Main Frame Assembly:
Connect part 1218 with part 104/105.
Connect part 1218 with part 101/102.
4. Connect Side Tilting and Main Frame
Together. (Figure B)
Lay the main frame on the carton box.
Use bolt (6010) to connect part 101, 104
and 106.
Lock main frame with safety pull pin (40532)
The safety pull pin must be in at all times
Connect the main frame to 1503.
Insert side tilting steel plate into 103, using
the longer slot. Lock with pull pin (Figure C)
5. Attach top and bottom net to the frame
Evenly connect the bungees to the top net
(Figure E) before putting it on the frame.
There should be 9 bungees on each side
of the net (Figure D). Lace bottom net on
frame (Figure D). Lace every third box on the
straight sections. Lace every other box in
the corners.
101
102
103
1218
103
1218
1218
1219
401
501
106 106
107
107
1425
1425
1503
1503
103
A
C
103
1425
4659
Steel Plate
B
106
401 101
6010
40532
Longer Slot
On Top
Fit In
Short Slot
Inside
Front View of Throwback net
Bungee Layout on the Net and Frame
Top net
69156
Bottom net
69157
Bungee
9191
Rope
D
E
Page 3 03-85568 2017-08-21
ADJUSTING THE ANGLE OF THE
THROWBACK FRAME
The throwback Side Tilting Section has a
special patent pending feature that enables
you to adjust the throwback without going from
hole to hole.
1. Push the silver middle button in, twist to right.
2. Do the same with the other side of the bar.
3. Adjust the tilting angle.
4. Twist both sides back to the left and locate holes.
Do not use the bottom two safety slots on the
side tilting section
1. Button In
2. TwistRight3. TiltThrowback4. TwistLeft
Side TiltingSection
Adjusting Throwback
Adjusting Throwback
Page 4 03-85568 2017-08-21
esab
throwback
side tilting section
base
side tilting section
Top of Mat
Base
Safety
Button
TIPS:
Tie thepullpintothesmallhole on theside tilting
sectionsteelplate,sothatitdoesnotgetlostwhen
storing.
Safety Bolts
For Storage
FOLDING INSTRUCTIONS
TWO PEOPLE ARE RECOMMENDED
FOR FOLDING AND OPENING
THE THROWBACK
1. Unhook the 9 bottom bungees
2. Lay the Main Frame on the ground
facing down.
3. Take the Pull Pins out of the Side Tilting
Section from the base. (Figure A)
4. Fold the base away from the main frame
(Figure B)
5. Shorten the Side Tilting and secure in to
the folding section holes with the pull
pins. (Figure C)
6. Take the 2 Safety Bolts out of the main
frame folding section.
7. When folding, Press the two (2) Safety
Buttons at the same time to release the
unit. Hold firmly and pull the top section
and pull it back. Fold in and reinsert
Safety Bolts for storage. (Figure F)
8. Take the Base and fold it onto the top
of the folded main frame. Insert the
safety bolts to hold the base together to
the folded main frame for storage.
(Figure E)
Store in a Dry Area
OPENING INSTRUCTIONS
Reverse the Folding Instructions.
Safety Bolts must in at all time when open.
A
B
C
D
E
F
Folding Steps
Page 5 03-85568 2017-08-21
BACKSTOP REBOUNDER KIT
FITS ALL GOALS AND REBOUNDERS
Page 6
DO NOT RETURN
TO THE STORE
Call Us
203.591.9032
Please Include: Your name, contact Information, part # of missing piece and any other questions.
Include pictures if possible so that we can resolve your case quickly. Thank you
Email Us
Please be ready to provide: Part # of missing or broken piece and your shipping information.
Thank you
Check inside the larger diameter pipes for other tubes
For Installation assistance, parts and information
, . .
This manual suits for next models
1
Table of contents
Other EZ Goal Sport & Outdoor manuals
