EZ Goal Bat-A-Way User manual

Monster Baseball
Bat-A-Way
12’x8’ Multi Trainer #901
ASSEMLY MANUAL
PARTS ALERT!
If you have a question or if there are
missing parts, please
Email: Service@NEOPm ail.net
or call 203-591-9032
Monday-Friday 8:30am -4:30pm ES T
Missing parts will be sent to you quickly
DO NOT RETURN TO THE STORE!
LOT#:
Page 1
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
TM

Monster Baseball Bat-A-Way Multi Trainer
TM
Top, Corner tube 3812 101 2
Straight tube with holes
3812 102 2
Folding section 3812 103A 2
3812 103A
3812 103B 2
3812 103B
Top side tube 3812 104 2
Top middle tube 3812 105 1
Bottom side tube 3212 106 2
Bottom corner tube 3212 107 2
Bottom straight tube
3212 108 1
Bottom straight tube
3212 109 1
Bracket T bar 3212 110 1
(#11A) T bar bend tube
3212 111 1
(#11B) black rubber T bar
3212 112 1
Side tilting section 3212 113 2
Bat-A-Way Bar 3212 114 1
Baseball 69224 1
Main net 69225 1
Bolt M8-45mm 0845 8+1
Bolt M8-40mm 0840 3+1
Please read instructions fully before beginning assembly.
PARTS LIST
NO Illustration Description Part # QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Page 2
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
*
*

PARTS LIST
18
19
20
21
22
23
24
25
Please read instructions fully before beginning assembly.
NO Illustration Description Part # QTY.
11+ 2
*
45
Page 3 #901-R1-13-08-2019
Customer Service:
[e-mail] or call 203-591-9032
6592
Additional part if lost
018
017
*
Monster Baseball Bat-A-Way Multi Trainer
TM

Please read instructions fully before beginning assembly.
Page 4
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
TOP
FRAME
BOTTOM
FRAME
#101
#114
#40532
#69224
#104
#105
#104
#0845
#0840
#102 #103
#113
#113
#106
#107
#108
#109
#110
#111 #112
#107
#106
#4659
#4659
#103
#102
#101
Check parts listed before assembling
TWO PEOPLE ARE RECOMMENDED FOR ASSEMBLY
Tighten the front upright frame tubing bolts #0845 and nuts tight,
so the inside tubes do not move side to side.
YouTube assembly instructions for the Monster Bat-A-Way Multi Trainer on line.
Go to YouTube, Search NEOP-EZGOAL Channel and see the helpful instructions.
Scroll down to 64128INT to see all the videos for assembly.
Monster Baseball Bat-A-Way Multi Trainer
TM

Page 5
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
STEP 1BUILD BOTTOM FRAME
BOTTOM
FRAME
#0840
#0840
#0845
#0845
#102 #103#103
#113
#113
#106
#107#108
#109
#110
#111 #112
#107
#106
#4659
#4659
#4659
#103
#102
Tighten the front upright frame tubing bolts and nuts
tight, so the inside tubes do not move side to side.
#109
#108
#110
#111
Connect Bolt #0840 with Nut and
use pull pin to lock in place
Adjust the rubber bar to the desired height.
Do not go above the red line on the white tube
#110
#0840
#0081
Tighten the batting Tee bolts and nuts snug not tight so the tee trainer can fold a
way when not in use.
Monster Baseball Bat-A-Way Multi Trainer
TM

Monster Baseball Bat-A-Way Multi Trainer
TM
Page 6
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
STEP 2
TOP FRAME
#0845
#0845
#101
#104 #104
#105
Tighten the top frame tubing bolts and nuts tight
so the inside tubes do not move side to side
TOP
FRAME
BOTTOM
FRAME
Tighten the top frame tubing bolts and nuts tight so the inside tubes do not move side to
side

Monster Baseball Bat-A-Way Multi Trainer
TM
#113
Easy 1 Person Tilting System,
Twist and Slide it to adjust .
1. Push the middle Brass Button in.
2 Twist the bar to right.
3. Do the same with the other side bar.
3. Adjust the tilting angle and you will be able to
slide by each hole.
4. Twist both bars back to the Left, relocate
buttons in holes.
5. Do Not Tilt the Goal Forward.
Go to YouTube search NEOP-EZGOAL Channel and see the helpful instructions. Scroll down to
64128INT-Patented tilting system.
Page 7
STEP 3
Tilting the Monster Bat-A-Way Trainer
the
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019

Page 8
Monster Baseball Bat-A-Way Multi Trainer
TM
STEP 4 Attaching the Net to the Monster Trainer
Go to YouTube, Search NEOP-EZGOAL Channel and see the helpful instructions. Scroll
down to 64128INT Attaching the Net to the Bat-A-Way Multi Trainer.
Tying the top & bottom corner
nets
1. Tilt the trainer as far back as it will
go.
2. The Monster Ezgoal label should
be on top.
3. On the top and bottom left and
right side of the net , There will be
ropes sticking out on all 4 corners
4. Tie each corner of the net rope
with a secure knot to the top loops
and the bottom holes .
5. When tying the bottom rope, make
sure the bottom front frame on the
inside is 12’ wide to match the back
of bottom frame.
1 1
1
22
2
33
3
44
4
55
5
66
6
77
7
88
8
99
9 10 11 12 13 14
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019

Page 9
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
Attaching the Net to the Monster Trainer
Go to YouTube, Search NEOP-EZGOAL Channel and see the helpful videos instructions.
Scroll down to 64128INT Attaching the net to the Bat-A-Way Multi Trainer
After the 4 corners ropes that are connected.
Use the 14” ropes to secure the remainder of the net to the frame.
The short ropes are made to slide up and down so you can adjust up and down the Bat-A-Way Rotating
Trainer.
1. There should be
6 open net.
squares between
each tied short
rope.
2. Start from the
top corner of the
frame. There
should be 2 short
14" ropes in each
corner of the
frame see figure 1.
3. To tie the ropes,
use a knot to
attach the net.
Each rope will be
separated by 6 net
squares until you
get to the bottom
or the other corner
+ or – a few net
squares.
When tying the knot,
snug the knot to the
frame, this will allow you
to slide the rope up and
down when adjusting
the Bat-A-Way rotating
trainer.
1. Pull the snug knot to the
back of the frame .
The net is designed to be
longer and lose on the
frame. This stops the ball
from rebounding back at
you. This also in most
cases stops the ball from
going under the net when
batting.
The net will hang lose as
the net nears the bottom of
the frame.
figure 1
2 short ropes
Monster Baseball Bat-A-Way Multi Trainer
TM

Page 10
Go to YouTube, Search
NEOP-EZGOAL Channel
and see the helpful video
instructions. Scroll down
to 64128INT Practicing with
the Bat-A-Way Multi Trainer.
STEP 5 Using the Bat-A-Way Multi Trainer
LEFTYLEFTY
1. Adjust the Bat-A-Way Multi rotating
ball trainer by removing the Pull pins.
Adjust the tube up or down to the
desired ball height and secure the 2
locking pins.
2 . Always Swing from front to the
back of the Trainer. Lefties on one
side, Righty's on the other. Now you
are ready to Bat-A-Way.
3. Always check the rope for wear .
Replace Ball and Rope if damaged
with The Bat-A-way.
Ball Kit #69224
Using the Batting Tee
1. The Batting Tee adjusts to the level needed to train,
Twist the rubber up or down.
2. When Batting the backstop should be tilted back for
high pops. This will help prevent breaking neighbors
windows.
3. Never tilt the trainer forward. It is Hazard and can fall .
Using the Pitching and Catching Trainer
1. Hook the 4 clips with the yellow strike zone to the
desired height.
2. Keep a little tension on the 4 webbings to keep the
yellow box square.
Button
RIGHTY
CAUTION: Inspect for proper fit and
secure goal.
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
Monster Baseball Bat-A-Way Multi Trainer
TM

Page 11
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
Monster Baseball Bat-A-Way Multi Trainer
TM
Go to YouTube, search NEOP-EZGOAL Channel and see the helpful video instructions.
Scroll down to 64128INT Folding the Bat-A-Way Multi Trainer.
STEP 6 Folding Bat-A-WayMultiTrainer
#4659
TWO PEOPLE ARE RECOMMENDED FOLDING THE TRAINER
Extend the life of your ball. Stored inside
(#69224). Push buttons in and slide black
plastic ring out of bar.
Fold the Bat-A-Way and Batting tee for
storage.
1. Take out the bottom 2 pull pins from
the side tilting sections.
2. Shorten the 2 tilting bars so they hang
next to the main frame.
3. Lift up the bottom ground tubes and
use 2 bungees to hold the two sections
together.
4. Take the net that is on the ground and
use the bungee to tie the net up off the
ground for storage.

Monster Baseball Bat-A-Way Multi Trainer
TM
STEP 7 Tilting the Monster Bat-A-Way Trainer
Page 12
Customer Service:
[e-mail] or call 203-591-9032
#901-R1-13-08-2019
TIPS
Email: [e-mail]
or call 203-591-9030
Monday-Friday 8:30am -4:30pm ES T
Missing parts will be sent to you via courier.

203.591.9032
[email protected]
Please Include: Your name, contact Information, part # of missing piece and any other questions. Include pictures if possible so that
we can resolve your case quickly.Thank you
Email Us
Call Us
Please be ready to provide: Part # of missing or broken part and your shipping information.
We will reply back immediately. Thank You