
BASIC OPERATION
Voltage, Capacity and Timer display alternately every 5 seconds under the machine
working condition.
Display
Press button, Screen LOGO solid, the machine ACTIVE the strong start
mode.
Press button, Screen LOGO flashes, the machine push mode OFF.
Note: In push mode the initial voltage output is 12V lasts for 1 second and then returns to normal voltage after.
Push Mode
Press button to active your machine ON, the timing mode start.
Note: timer mode record in minutes, the maximum recording time is 999 minutes. the time is counting
only when machine is running. The timer will reset the count when the P2 EPIC is being restarted.
Start/ Stop Built-in Timer
Adjusting Voltage
Press or to adjust in 0.1V increments.
Press and Hold or to quickly adjust the voltage in 0.1V increments.
Clik button to turn your machine START or STOP
Power START/ STOP
Press and Hold the button for two seconds to turn P2 EPIC ON.
Press and Hold the button for two seconds to turn P2 EPIC OFF.
Power ON/ OFF
@EZTATTOO OFFICAL
USER MANUAL