Ezviz CS-CMT-CHARGER User manual

COPYRIGHT © 2019 Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ
Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”)
cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior
written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ,
ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS
PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL
DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF
PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER
THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF
OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE,
APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.

SAVE THIS MANUAL FOR FUTURE REFERENCE
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a
battery that cannot be disposed of as unsorted municipal waste in the European Union.
See the product documentation for specific battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd . declares that the radio equipment type [CS-CMT-CHARGER] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
Due to the product shape and dimension, the name and address of the importer/
manufacturer are printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our local contact details.

1
Basics
Battery Slot
Clasps
LED IndicatorLED Indicator
Battery Slot
Clasps
Power Interface
Name Description
LED Indicator • Solid Red: Charging.
• Solid Green: Charged.
• Blinking Red and Green:No Battery in the slot.
Power Interface For charging the battery.

2
Charge the Battery
1Insert a battery into one of the battery slot.
2Connect the charger with power outlet via power adapter (5V 2A) which should be
purchased separately.
Power Apapter
Power Outlet
When the LED indicator turns to green, the charging is completed.

3
3Hold on the clasps until you pull out the battery.
Box Content
Charger (x1) Quick Start Guide (x1)
For detailed information, please visit www.ezvizlife.com.

4
기본 사항
배터리 슬롯
클립
LED 표시등LED 표시등
배터리
슬롯
클립
전원 인터
페이스
이름 설명
LED 표시등 • 빨간색 켜짐 : 충전
• 녹색 켜짐 : 충전 완료
• 빨간색 및녹색 깜빡임 : 슬롯에 배터리가 없
습니다 .
전원 인터
페이스
배터리 충전용입니다 .

5
배터리 충전
1배터리를 배터리 슬롯 중한곳에 삽입하십시오 .
2전원 어댑터 (별매 , 5V 2A) 를사용해 충전기를 전원 콘센
트에 연결하십시오 .
전원 어댑터
전원 콘센트
LED 표시등이 녹색으로 바뀌면 충전이 완료된 것입니다 .

6
3배터리가 나올 때까지 클립 눌러주십시오 .
박스 내용물
충전기 (x1) 빠른 시작 가이드 (x1)
자세한 정보를 알아보시려면 www.ezvizlife.com 을방문해
주십시오 .
이기기는 가정용으로 전자파적합등록을 한기기로서
주거지역은 물론 모든 지역에서 사용할 수있습니다 .
위와 같은 무선설비는 전파혼선의 가능성이 있으므로
인명안전과 관련된 서비스는 할수없습니다 .

7
Tính năng cơ bản
Khe cắm pin
Móc cài
Đèn LEDĐèn LED
Khe cắm pin
Móc cài
Cổng nguồn
điện
Tên Mô tả
Đèn LED • Đỏ ổn định: Đang sạc.
• Xanh lá ổn định: Đã sạc.
• Đỏ và Xanh lá nhấp nháy :Không có pin trong
khe cắm.
Cổng nguồn
điện
Để sạc pin.

8
Sạc pin
1Lắp pin vào một trong các khe cắm pin.
2Kết nối bộ sạc với ổ cắm điện thông qua bộ đổi nguồn (5V 2A)
nên được mua riêng.
Nguồn điện
Ổ cắm điện
Khi đèn LED chuyển sang màu xanh, hoàn thành quá trình
sạc.

9
3Giữ chặt móc cho đến khi bạn tháo pin ra.
Thành phần trong hộp
Bộ sạc (x1) Hướng dẫn sử dụng nhanh (x1)
Để biết thông tin chi tiết, vui lòng truy cập
www.ezvizlife.com.

10










 


 
 
 




11

1
2





12
3

 


13
Dasar-dasar
Slot Baterai
Pengait
Indikator LEDIndikator LED
Slot Baterai
Pengait
Antarmuka Daya
Nama Deskripsi
Indikator LED • Merah Pekat: Mengisi Daya
• Hijau Pekat: Terisi Daya.
• Berkedip Merah dan Biru: Tidak ada Baterai di dalam slot.
Antarmuka Daya Untuk mengisi daya baterai.

14
Mengisi Daya Baterai
1Masukkan baterai ke salah satu slotnya.
2Sambungkan pengisi daya ke stopkontak daya melalui adaptor daya (5V 2A) yang
dijual terpisah.
Adaptor Daya
Stopkontak Daya
Pengisian daya selesai saat indikator LED berubah hijau.

15
3Tahan pengait hingga Anda mengeluarkan baterai.
Isi Kotak
Pengisi Daya (x1) Panduan Mulai Cepat (x1)
Untuk informasi selengkapnya, kunjungi www.ezvizlife.com.