Ezviz C6B User manual

ID

COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL RIGHTS RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™
website (http://www.ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision
Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter
referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any
means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any
warranties, guarantees or representations, express or implied, regarding to the Manual.
Trademarks Acknowledgement
™, ™, and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HIKVISION’S TOTAL LIABILITY FOR ALL
DAMAGES EXCEED THE PURCHASE PRICE THE PRODUCT.
HIKVISION does not undertake any liability for personal injury or property damage, as the result of product interruption
or service termination cause by: a) improper installation or usage other than as requested; b) the protection of
national or public interests; c) Force Majeure; d) yourself or the third party, including not limitation, using any third
party’s products, software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of illegal encroachment in certain area;
however, the proper installation of the Products will not eliminate, but only reduce, that accidents will not occur or

that there will be no personal injury or property loss as a result. You are highly recommended to raise your vigilance and
strengthen the safety
awareness in the daily life.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING
THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. YOU FUTHER AGREE THAT
THIS PRODUCT IS ONLY FOR CIVIL USE, AND HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT, MEDICAL TREATMENT, SAFETY EQUIPMENT
OR OTHER SITUATIONS WHERE THE PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON
OF MASS DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR
ENERGY USES OR ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES
RESULTING FROM THE ABOVE USAGES WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment type [CS-CV240
(B0-21WFR)] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Due to the product shape and dimension, the name and address of the importer/
manufacturer are printed on the package.
SAVE THIS MANUAL FOR FUTURE REFERENCE

1
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below. The LED indicator will flash red and blue when the camera is ready for
setup.
For details of the LED indicator status, refer to the Basic section.
Step 2 Camera Setup
1. Create a user account
- Connect your mobile phone to Wi-Fi using your 2.4GHz network.
- Search for "EZVIZ" in the App Store or Google Play (TM).
- Download and install the EZVIZ app.
- Launch the app.
- Create, and register an EZVIZ user account by following the startup wizard.
2. Adding a camera to EZVIZ
- Log in to your account using the EZVIZ app.
- Tap "+" on the Home page to go to the Scan QR Code interface.
Power Cable
Power Outlet

2
Bottom of the Camera
- Scan the QR Code on the bottom of the camera or the front cover of the Quick Start Guide.
- Enter the password for your Wi-Fi network.
- Select the correct time zone and DST information.
- Tap "Finish" to finish setup.
• If the camera fails to connect to your Wi-Fi network, press and hold the RST
button for 3s and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the RST button for 3s to reboot
the device. When the LED indicator flickers red and blue, you can choose a new
Wi-Fi network.

3
3. To Change the Default Password
The camera uses the verification code found on the bottom of the camera as the default
password. After adding the camera to your network, you will be required to change the device
password to ensure video security. The password is used for Image Encryption, too. If you
turn on the Image Encryption, you will be required to input your password when you view live
video or playback stored video from the camera.
- Go to the camera settings screen to change the default password.
- Tap on “Change Password”.
- Tap on “Edit”.
- Enter the original verification code located on the bottom of the camera.
- Enter the new password. Please use letters and numbers to make a password anywhere
from 6 to 12 characters in length.
4. Angle Adjustment
You can adjust the camera using the EZVIZ app to find the best angle. The camera pans from
0° to 340° and tilts from -80° to 50° (-80° to 0° is the range of privacy mask coverage).

4
- Log into the EZVIZ app.
- Select the camera.
- Tap on the “Smart Mask” icon. The camera lens will rotate up and hide under the lens cover.
Turning on Smart Mask
Smart Mask
Lens will rotate up under the lens cover

5
Wall Mounting (Optional)
The camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. (Optional) If you want to install the microSD card, insert the microSD card into the microSD
card slot on the rear side of the camera. Otherwise, you can skip this step.
2. Attach the camera base to the place where you want to affix the camera.
3. (Optional) If the wall is solid, drill and insert three expansion screws.
4. Affix the camera base onto the template using the three metal screws.
5. Make sure the on the base towards you and fix the base to the wall with three screws.
6. Install the camera on the base, and turn it 15° to secure it.
7. Connect the power cable to the camera. If the camera was previously connected to the Wi-
Fi network, it will automatically connect to the same Wi-Fi network.
Wooden Wall
Solid Wall

6
Appendix
Box Content
Camera (x1) Base (x1)
Power Cable (x1) Screw Kit (x1)
Power Adapter (x1) Quick Start Guide (x1)

7
Basics
Dual MIC
LED Indicator Speaker
Lens
Blue Flicker: The network is properly
connected.
Solid Red: The device is activating.
Slow Red Flicker: Invalid network connection.
Fast Red Flicker: MicroSD card or other error
occurred.
Alternating Blue and Red Flicker: Camera is
ready for Wi-Fi setup.
LED Indicator
LED Indicator Status

8
Name Description
Power Input 5V±10%
Network Interface 10M/100M Self-adaptive Ethernet Interface
Reset Button Hold down the reset button for 10 seconds to restore default settings.
MicroSD Card Slot Insert microSD card for local storage.
MicroSD Card Slot
RESET Button
Network Interface
Power Input

9
Troubleshooting
Q: “The device is offline.” or “The device is not registered.” prompts appear when adding the
camera using the EZVIZ app.
A: 1. Make sure the network, which the camera is connected to, is working properly and the
router’s DHCP is enabled.
2. Hold down the RESET button for 3 s to reset the settings and set the network again.
Q: How to use the microSD for local sotrage?
A: Insert a microSD card into the card slot and add the camera to your EZVIZ account. Log in
the EZVIZ app and enter the “Device Details” interface, if the “Initialize Storage Card” button
appears, you need to initialize the microSD card first.
The microSD card storage for the motion detection recording is enabled by default.
Q: The mobile phone cannot receive alarm prompts when the camera is online.
A: 1. Make sure the EZVIZ app is running on your mobile phone.
2. For Android OS mobile phone, make sure the app is running in the background; and for iOS
mobile phones, enable the message push function in “Settings > Notification”.
Q: Live view or playback failed.
A: Make sure your network is well connected. Viewing live video requires a good bandwidth. You
can refresh the video, or change a network and try again.

10
설정
1단계 전원 켜기
전원 케이블을 카메라에 연결한 후아래 그림과 같이 전원
어댑터를 전원 소켓에 꽂습니다. 카메라에 설정할 준비가 되면
LED 표시등이 빨간색과 파란색으로 깜빡입니다.
전원
케이블
전원 소켓
LED 표시등의 상태에 대한 자세한 내용은 기본 사항을
참조하십시오.
2단계 카메라 설정
1. 사용자 계정 생성
- 2.4GHz 네트워크를 사용해 모바일 폰을 Wi-Fi에연결합니다.
- App Store 또는 Google Play(TM)에서 "EZVIZ"를검색합니다.
- EZVIZ 앱을 다운로드해 설치합니다.
- 앱을 실행합니다.
- 시작 마법사에 따라 EZVIZ 사용자 계정을 생성 및등록합니다.
2. EZVIZ에카메라 추가
- EZVIZ 앱을 사용해 계정에 로그인합니다.
- 홈화면에서 "+"를탭해 QR 코드 스캔 인터페이스로 이동합니다.

11
- 카메라 하단 또는 퀵스타트 가이드 표지에 부착된 QR 코드를
스캔합니다.
- Wi-Fi 네트워크 비밀번호를 입력합니다.
- 정확한 표준 시간대와 DST 정보를 선택합니다.
- 설정을 완료하려면 "Finish(완료)"를탭합니다.
카메라 바닥
• 카메라를 Wi-Fi 네트워크에 연결하지 못한 경우 RST 버튼을 3
초동안 길게 누른 후2.2단계부터 다시 시작하십시오.
• 다른 Wi-Fi 네트워크를 선택하려면 RST 버튼을 3초동안 길게
누른 후장비를 재부팅하십시오. LED 표시등이 빨간색과
파란색으로 깜박이면 새로운 Wi-Fi 네트워크를 선택할 수
있습니다.

12
3. 기본 비밀번호 변경
본카메라는 카메라 하단에 부착된 기본 비밀번호를 인증
코드로 사용합니다. 동영상 보안을 철저히 하기 위해 카메라를
네트워크에 연결한 후장비 비밀번호를 변경해야 합니다.
해당 비밀번호는 이미지를 암호화할 때도 사용합니다. Image
Encryption (이미지 암호화)를사용하도록 설정하면 동영상을
보거나 카메라에 저장된 동영상을 재생하려면 비밀번호를
입력해야 합니다.
- 카메라 설정 화면으로 이동해 기본 비밀번호를 변경하십시오.
- “Change Password(비밀번호 변경)”을 탭합니다.
- “Edit(편집)”을 탭합니다.
- 카메라 하단에 부착된 기본 인증 코드를 입력합니다.
- 신규 비밀번호를 입력합니다. 문자와 숫자를 사용해 6자에서 12 자
길이의 비밀번호를 생성합니다.
4. 각도 조정
EZVIZ 앱을 이용해 카메라를 조정하면 최적의 각도를 찾을 수
있습니다. 카메라는 좌우로 0°~ 340°, 상하로 -80°~ 50°를 움직입니다
(-80°~ 0°는 사생활 보호(privacy mask) 구역 범위입니다).

13
- EZVIZ 앱에 로그인합니다.
- 카메라를 선택합니다.
- “스마트 마스크” 아이콘을 탭합니다. 카메라 렌즈가 위로 회전하면서
렌즈 커버 아래로 감춰집니다.
렌즈가 렌즈 커버 아래에서
위로 회전합니다.
스마트
마스크
스마트 마스크 켜기

14
벽면 장착(선택 사항)
본카메라는 벽면 또는 천장에 설치할 수있습니다.
• 카메라 무게의 최소 세배를 견딜 정도로 벽면이 튼튼한지
확인하십시오.
• 설치할 표면은 깨끗하고 평평해야 합니다.
1. (선택 사항) microSD 카드를 설치하려면 microSD 카드를 카메라 뒷면에
있는 microSD 카드 슬롯에 삽입합니다. microSD 카드를 사용하지 않을
경우 이단계를 생략하십시오.
2. 카메라를 고정하려는 위치에 카메라 베이스를 부착합니다.
3. (선택 사항) 벽면이 단단한 경우 구멍을 뚫고 확장 나사 세개를
삽입합니다.
4. 금속 나사 세개를 사용해 카메라 베이스를 템플릿에 장착하고
조입니다.
나무 벽
단단한 벽
5. 베이스에 있는 표시가 설치자를 향하고 있는지 확인하고 3개의
나사를 이용해서 베이스를 벽에 고정합니다.
6. 카메라를 베이스에 설치하고 15°돌려 단단히 고정합니다.

15
7. 전원 케이블을 카메라에 연결합니다. 이전에 카메라를 Wi-
Fi 네트워크에 연결했던 경우 동일한 Wi-Fi 네트워크에 자동
연결됩니다.
이기기는 가정용으로 전자파적합등록을 한기기로서
주거지역은 물론 모든 지역에서 사용할 수있습니다. 위와 같은
무선설비는 전파혼선의 가능성이 있으므로 인명안전과 관련된
서비스는 할수없습니다.