Ezviz C6T User manual

C6T
UD04618B
ID

COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL RIGHTS RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.
ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital
Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the
Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations,
express or implied, regarding to the Manual.
Trademarks Acknowledgement
™, ™, and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other
trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE
AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION
WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HIKVISION’S TOTAL LIABILITY FOR ALL DAMAGES
EXCEED THE PURCHASE PRICE THE PRODUCT.
HIKVISION does not undertake any liability for personal injury or property damage, as the result of product interruption or
service termination cause by: a) improper installation or usage other than as requested; b) the protection of national or public
interests; c) Force Majeure; d) yourself or the third party, including not limitation, using any third party’s products, software,
applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of illegal encroachment in certain area; however,
the proper installation of the Products will not eliminate, but only reduce, that accidents will not occur or that there will be no
personal injury or property loss as a result. You are highly recommended to raise your vigilance and strengthen the safety

awareness in the daily life.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. YOU FUTHER AGREE THAT THIS PRODUCT
IS ONLY FOR CIVIL USE, AND HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT, MEDICAL TREATMENT, SAFETY EQUIPMENT OR OTHER SITUATIONS
WHERE THE PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS DESTRUCTION, CHEMINCAL
AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES OR ANTI-HUMANITY USAGES. YOU
SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES RESULTING FROM THE ABOVE USAGES WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for

successful communication.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore
with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU,
the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more
information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment type [CS-CV240 (B0-
21WFR)] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Due to the product shape and dimension, the name and address of the importer/manufacturer
are printed on the package.
SAVE THIS MANUAL FOR FUTURE REFERENCE

1
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in
the figure below. The LED indicator will flash red and blue when the camera is ready for setup.
LED Indicator Status
Power Cable
Power Outlet
Power Interface
Blue Flicker: The network is properly connected.
Solid Red: The device is activating.
Slow Red Flicker: Invalid network connection.
Fast Red Flicker: MicroSD card or other error
occurred.
Alternating Blue and Red Flicker: Camera is ready
for Wi-Fi setup.
LED Indicator
Turn on the Mini 360 Plus and let it power up. The camera will completely rotate side-
to-side and tilt up-and-down once.

2
Step 2 Camera Setup
1. Create a user account
- Connect your mobile phone to Wi-Fi using your 2.4GHz network.
- Search for "EZVIZ" in the App Store or Google Play (TM).
- Download and install the EZVIZ app.
- Launch the app.
- Create, and register an EZVIZ user account by following the startup wizard.
2. Adding a camera to EZVIZ
- Log in to your account using the EZVIZ app.
- Tap "+" on the Home page to go to the Scan QR Code interface.
- Scan the QR Code on the bottom of the camera or the front cover of the Quick Start Guide.
- Enter the password for your Wi-Fi network.
- Select the correct time zone and DST information.
- Tap "Finish" to finish setup.

3
• If the camera fails to connect to your Wi-Fi network, press and hold the RST button
for 3s and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the RST button for 3s to reboot the
device. When the LED indicator flickers red and blue, you can choose a new Wi-Fi
network.
3. To Change the Default Password
The camera uses the verification code found on the bottom of the camera as the default
password. After adding the camera to your network, you will be required to change the device
password to ensure video security. The password is used for Image Encryption, too. If you turn
on the Image Encryption, you will be required to input your password when you view live video
or playback stored video from the camera.
r- Go to the camera settings screen to change the default password.
- Tap on “Change Password”.
Reset Button
Scan the QR Code

4
- Tap on “Edit”.
- Enter the original verification code located on the bottom of the camera.
- Enter the new password. Please use letters and numbers to make a password anywhere from 6 to
12 characters in length.
4. Angle Adjustment
You can adjust the camera via the EZVIZ app to get an optimum angle. The panning angle ranges
from 0° to 340°, and the tilting angle ranges from -10° to 80°.

5
Wall Mounting (Optional)
The camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. (Optional) If you want to install the microSD card, insert the microSD card into the microSD card
slot on the rear side of the camera. Otherwise, you can skip this step.
2. Attach the supplied drill template to the place where you want to affix the camera.
3. (Optional) If the wall is solid, drill and insert three expansion screws.
4. Affix the camera base onto the template using the three metal screws.
5. Install the camera on the base, and turn it 15° to secure it.
6. Connect the power cable to the camera. If the camera was previously connected to the Wi-Fi
network, it will automatically connect to the same Wi-Fi network.
Solid Wall Wooden Wall

6
Appendix
Box Content
Mini 360 Plus (x1) Base (x1)
Power Cable (x1) Drill Template (x1) Screw Kit (x1)
Power Adapter (x1) Quick Start Guide x(1)

7
설정
1단계 전원 켜기
전원 케이블을 카메라에 연결한 후아래 그림과 같이 전원 어댑터를
전원 소켓에 꽂습니다 . 카메라에 설정할 준비가 되면 LED 표시등이
빨간색과 파란색으로 깜빡입니다 .
전원 소켓
전원 인터페이스
전원 케이블
LED 표시등 상태 파란색 깜빡임 : 네트워크가 원활하게
연결되었습니다 .
빨간색 켜짐 : 장비가 활성화 중입니다 .
빨간색으로 느리게 깜박임 : 네트워크
연결이 잘못되었습니다 .
빨간색으로 빠르게 깜박임 : MicroSD 카드
또는 기타 장치에 오류가 발생했습니다 .
파란색과 빨간색이 번갈아가며 깜박임 :
카메라에 Wi-Fi 를설정할 준비가 되었습
니다 .
LED 표시등
C6T 를켜면 전원이 켜집니다 . 카메라가 한번 완전히 좌우로 회
전한 후위아래로 움직입니다 .

8
2단계카메라 설정
1. 사용자 계정 생성
- 2.4GHz 네트워크를 사용해 모바일 폰을 Wi-Fi 에연결합니다 .
- App Store 또는 Google Play (TM) 에서 "EZVIZ" 를검색합니다 .
- EZVIZ 앱을 다운로드해 설치합니다 .
- 앱을 실행합니다 .
- 시작 마법사에 따라 EZVIZ 사용자 계정을 생성 및등록합니다 .
2. EZVIZ 에카메라 추가
- EZVIZ 앱을 사용해 계정에 로그인합니다 .
- 홈화면에서 "+" 를탭해 QR 코드 스캔 인터페이스로 이동합니다 .
- 카메라 하단 또는 퀵스타트 가이드 표지에 부착된 QR 코드를
스캔합니다 .
- Wi-Fi 네트워크 비밀번호를 입력합니다 .
- 정확한 표준 시간대와 DST 정보를 선택합니다 .
- 설정을 완료하려면 "Finish( 완료 )" 를탭합니다 .

9
초기화 버튼
QR 코드 스캔
• 카메라를 Wi-Fi 네트워크에 연결하지 못한 경우 RST 버튼을
3 초동안 길게 누른 후2.2 단계부터 다시 시작하십시오 .
• 다른 Wi-Fi 네트워크를 선택하려면 RST 버튼을 3 초동안 길게
누른 후장비를 재부팅하십시오 . LED 표시등이 빨간색과 파
란색으로 깜박이면 새로운 Wi-Fi 네트워크를 선택할 수있습
니다 .
3. 기본 비밀번호 변경
본카메라는 카메라 하단에 부착된 기본 비밀번호를 인증 코드로 사
용합니다 . 동영상 보안을 철저히 하기 위해 카메라를 네트워크에 연
결한 후장비 비밀번호를 변경해야 합니다 . 해당 비밀번호는 이미지
를암호화할 때도 사용합니다 . Image Encryption( 이미지 암호화 )를사용
하도록 설정하면 동영상을 보거나 카메라에 저장된 동영상을 재생
하려면 비밀번호를 입력해야 합니다 .
- 카메라 설정 화면으로 이동해 기본 비밀번호를 변경하십시오 .
- “Change Password( 비밀번호 변경 )”을 탭합니다 .

10
- “Edit( 편집 )”을 탭합니다 .
- 카메라 하단에 부착된 기본 인증 코드를 입력합니다 .
- 신규 비밀번호를 입력합니다 . 문자와 숫자를 사용해 6 자에서 12 자
길이의 비밀번호를 생성합니다 .
4. 각도 조정
EZVIZ 앱을 사용하여 카메라를 조정해 최적의 각도로 맞출 수있습니다 .
수평 회전 각도 범위는 0°~340°이며 상하 기울임 각도 범위는 -10°~80°
입니다 .

11
벽면 장착 (선택 사양 )
본카메라는 벽면 또는 천장에 설치할 수있습니다 .
• 카메라 무게의 최소 세배를 견딜 정도로 벽면이 튼튼한지 확인하
십시오 .
• 설치할 표면은 깨끗하고 평평해야 합니다 .
1. ( 선택 사양 ) microSD 카드를 설치하려면 microSD 카드를 카메라 뒷면에
있는 microSD 카드 슬롯에 삽입합니다 . microSD 카드를 사용하지 않을
경우 이단계를 생략하십시오 .
2. 제공된 드릴 템플릿을 카메라를 설치할 위치에 부착합니다 .
3. ( 선택 사양 ) 벽면이 단단한 경우 구멍을 뚫고 확장 나사 세개를
삽입합니다 .
4. 금속 나사 세개를 사용해 카메라 베이스를 템플릿에 장착하고
조입니다 .
단단한 벽 나무 벽

12
5. 카메라를 베이스에 설치하고 15°돌려 단단히 고정합니다 .
6. 전원 케이블을 카메라에 연결합니다 . 이전에 카메라를 Wi-Fi 네트워크
에연결했던 경우 동일한 Wi-Fi 네트워크에 자동 연결됩니다 .

13
부록
박스 내용물
C6T(x1) 베이스 (x1)
전원 케이블 (x1) 드릴 템플릿 (x1) 나사 세트 (x1)
전원 어댑터 (x1) 퀵스타트 가이드 (x1)

14
Cài đặt
Bước 1 Cấp điện
Cắm cáp nguồn vào camera, sau đó cắm phích bộ đổi điện
vào ổ điện như hình minh họa dưới đây. Đèn LED sẽ nháy đỏ
rồi chuyển sang màu xanh khi camera đã sẵn sàng để cài đặt.
Ổ điện
Giắc cắm
nguồn
Cáp nguồn
Trạng thái đèn LED
Nháy xanh: Kết nối mạng tốt.
Đỏ ổn định: Thiết bị đang kích hoạt.
Nháy đỏ chậm: Kết nối mạng
không hoạt động.
Nháy đỏ nhanh: Lỗi thẻ microSD
hoặc lỗi khác.
Nháy xanh và đỏ luân phiên:
Camera đã sẵn sàng để cài đặt
Wi-Fi.
Đèn LED
Bật C6T và đợi thiết bị được cấp điện. Camera sẽ quét hết
một lượt từ bên này sang bên kia và từ trên xuống dưới.

15
Bước 2 Cài đặt camera
1. Tạo tài khoản người dùng
-Kết nối điện thoại di động với Wi-Fi sử dụng mạng 2.4GHz.
-Tìm kiếm "EZVIZ" trong App Store hoặc Google Play (TM).
-Tải xuống và cài đặt ứng dụng EZVIZ.
-Khởi chạy ứng dụng.
-Tạo và đăng ký tài khoản người dùng EZVIZ bằng cách làm
theo hướng dẫn khởi động lần đầu.
2. Thêm camera vào EZVIZ
-Đăng nhập vào tài khoản của bạn sử dụng ứng dụng EZVIZ.
-Nhấn "+" trên trang chủ để vào giao diện Quét mã QR.
-Quét mã QR ở dưới đáy camera hoặc bìa trước của Hướng
dẫn Sử dụng Nhanh.
-Nhập mật khẩu mạng Wi-Fi của bạn.
-Chọn múi giờ chính xác và thông tin DST.
-Nhấn Finnish (Hoàn tất) để hoàn tất cài đặt.