Ezviz CS-T2-A User manual

www.ezvizlife.com
Quick Start Guide


COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter
referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ
does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the
latest version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS
THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER
INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC

INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION,
USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT
YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK
ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Information
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed under
the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see: www.
recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains
a battery that cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.

SAVE THIS MANUAL FOR FUTURE REFERENCE
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co.,Ltd. declares that the radio equipment type [CS-T2-A] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
• Warning: Do not ingest battery, which can result in chemical burn hazard.
• This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can
result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of
flammable liquid or gas.
• Dispose of used batteries according to the instructions.
Due to the product shape and dimension, the name and address of the importer/manufacturer
are printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our local contact
details.

1
Step 1 Install the Battery
1Slide the rear cover off from the detector and then open the battery cover, as shown
below.
2Pull out the insulation sheet from the battery slot.
3Replace the battery cover and the rear cover, and then finish the battery installation.
Step 2 Add Detector to Internet Alarm Hub
The detector should be used cooperating with an Internet Alarm Hub (purchased
separately).
• Option 1 (Recommended) Add by EZVIZ App
1. Install the EZVIZ App
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching “EZVIZ” in App Store (iOS version)
and Google PlayTM (Android version).
- Start the app and register for an EZVIZ user account.
Operations
Insulation Sheet

2
2. Add Detector
- Log in the EZVIZ app.
- Find your Internet Alarm Hub and enter the Linked Device list.
- Tap the “+” of the Linked Device and scan the QR code of the detector, which is on
the battery cover of the detector, to link the detector to the Internet Alarm Hub.
• Option 2 Add by Operating Internet Alarm Hub
1. Turn on the “Adding Detectors Mode” of your Internet Alarm Hub by pressing the
Setting button. Refer to Quick Start Guide of your Internet Alarm Hub for details.
2. Take the detector close to the Internet Alarm Hub (within 50cm) and separate the two
parts of the detector to send the adding request.
3. The Internet Alarm Hub issues a voice prompt of the device type and serial No.
indicating the detector has been added.
Within 50 cm

3
Step 3 Install Detector
• The installation place should with no strong magnetic field nearby.
• To ensure the detection effect, the distance of two parts of the detector should be
as small as possible (within 5mm) when you install the detector.
1. Select the Installation Position
You can install the detector on the door or window, as shown below.
Door Window

4
2. Install Detector
Make sure the door or window is closed. Paste the foam sticker to the bottom of the
two parts of the detector and then fix them on the selected position, as shown below.
You are recommended to install the main body of the detector on the
immovable place (such as door frame) in case it falls down when you open and
close the door or window.
Maintenance
When the battery runs out, a low battery warning will be sent to the EZVIZ account to remind
you to change the battery.
- If you install the main body on the left, push the main body upwards and take it off from the
rear cover; if you install the main body on the right, pull the main body downwards and take
it off from the rear cover.
- Open the battery cover and then change the battery.
- Install the main body back to the rear cover.
Door/Window Frame
Door/Window

5
Appendix
Box Content
Detector x1 Foam Sticker x2 Quick Start Guide x1
Basics
Functions
Based on the magnetism, when the distance between main body and the magnet body exceeds
3 cm, the detector sends an alarm signal to the EZVIZ app.
Main Body
Indicator
Flicker Twice: Alarm Triggered
Flicker Five Times: Low Battery
Magnet
Body

6
Specifications
Battery Voltage 3V
Battery Life 2 Years
Working Current Static: 20μA Max.: 40mA
Low Battery Voltage Alarm 2.8V±0.1V
Working Temperature -10°C to 55°C (14°F to 131°F)
Working Humidity 10% to 90%
Trigger Distance 30mm±5mm
Resume Distance 25mm±5mm
Working Frequency 433MHz

7
Bước 1 Lắp đặt pin
1Trượt nắp sau ra khỏi T2 rồi sau đó mở nắp pin, như minh
họa dưới đây.
2Kéo tấm cách điện ra khỏi khe pin.
Tấm cách điện
3Thay thế nắp pin và nắp đậy phía sau, và sau đó hoàn tất việc
lắp đặt pin.
Bước 2 Đấu nối T2 vào Cổng chuông báo Internet
Nên sử dụng T2 với Cổng chuông báo Internet (như A1, loại
này cần mua riêng).
• Tùy chọn 1 (Khuyến nghị) Đấu nối bằng Ứng dụng EZVIZ
1. Cài đặt Ứng dụng EZVIZ
-Kết nối điện thoại di động của bạn vào mạng Wi-Fi.
-Tải về và cài đặt ứng dụng EZVIZ bằng cách tìm từ khóa
“EZVIZ” trên App Store (phiên bản dùng iOS) và Google PlayTM
(phiên bản dùng Android).
Thao tác

8
-Chạy ứng dụng và đăng ký tài khoản người dùng EZVIZ.
2. Đấu nối T2
-Đăng nhập vào ứng dụng EZVIZ.
-Tìm Cổng chuông báo Internet của bạn và vào danh sách
Thiết bị Liên kết.
-Chạm nút “+” của Thiết bị Liên kết và quét mã QR của T2,
thông tin này có trên nắp pin để liên kết T2 để liên kết T2 với
Cổng chuông báo Internet của bạn.
• Tùy chọn 2 Đấu nối bằng cách chạy Cổng chuông báo Internet
1. Bật “Chế độ thêm bộ dò tìm” của Cổng chuông báo Internet
bằng cách nhấn nút Cài đặt. Tham khảo Hướng dẫn sử dụng
nhanh Cổng chuông báo Internet để biết chi tiết.
2. Đưa T2 lại gần Cổng chuông báo Internet (trong vòng 50cm) và
tách hai bộ phận của T2 để gửi yêu cầu thêm.
Trong vòng
50 cm
3. Cổng chuông báo Internet sẽ phát ra lời nhắn thoại của loại
thiết bị và số sê-ri ám chỉ rằng T2 đã được thêm vào.

9
Bước 3 Lắp đặt T2
• Vị trí lắp đặt phải không được ở gần khu vực từ trường
mạnh.
• Để đảm bảo hiệu quả dò tìm, khoảng cách giữa hai bộ phận
của T2 phải càng nhỏ càng tốt (trong vòng 5mm) khi bạn lắp
đặt T2.
1. Chọn Vị trí lắp đặt
Bạn có thể lắp đặt bộ dò tìm trên cửa chính hoặc cửa sổ, như
minh họa dưới đây.
Cửa chính Cửa sổ

10
2. Đang lắp đặt T2
Chắc chắn cửa chính hoặc cửa sổ đã đóng lại. Dán miếng dán
bằng bọt biển vào đế của hai bộ phận của T2 và rồi cố định
chúng tại vị trí đã chọn, như minh họa dưới đây.
Khung cửa
chính/cửa sổ
Cửa chính/
cửa sổ
Bạn được khuyến khích lắp đặt bộ phận chính của T2 ở vị trí
cố định (chẳng hạn như khung cửa) phòng trường hợp nó
rơi xuống khi bạn mở và đóng cửa chính hoặc cửa sổ.
Bảo dưỡng
Khi sắp hết pin, cảnh báo pin yếu sẽ được gửi đến tài khoản EZVIZ để
nhắc bạn đổi pin.
-Nếu bạn lắp đặt bộ phận chính ở bên trái, hãy đẩy bộ phận chính
lên phía trên và tháo nó ra từ nắp đậy phía sau; nếu bạn lắp đặt bộ
phận chính ở bên phải, hãy kéo bộ phận chính xuống phía dưới và
theo nó ra từ nắp đậy phía sau.
-Mở nắp đậy pin và sau đó thay pin.
-Lắp bộ phận chính về phía sau nắp đậy phía sau.

11
Phụ lục
Đồng bộ
T2-A x1 Miếng dán bằng
bọt biển x2 Hướng dẫn sử
dụng nhanh x1
Tính Năng Cơ Bản
Bộ phận chính
Chỉ báo
Nháy hai lần: Cảnh
báo được kích hoạt
Nháy năm lần: Pin
yếu
Bộ
phận từ
tính
Chức năng
Dựa trên từ tính, khi khoảng cách giữa bộ phận chính và bộ phận từ
tính vượt quá 3 cm, T2 sẽ gửi một tín hiệu cảnh báo đến ứng dụng
EZVIZ.

12
Thông số kỹ thuật
Điện thế của pin 3V
Tuổi thọ pin 2 năm
Dòng điện làm việc Tĩnh: 20μA Tối đa: 40mA
Cảnh báo điện thế pin yếu 2.8V±0.1V
Nhiệt độ làm việc -10°C đến 55°C
(14°F đến 131°F)
Độ ẩm làm việc 10% đến 90%
Khoảng cách kích hoạt 30mm±5mm
Khoảng cách tiếp tục 25mm±5mm
Tần số làm việc 433MHz

13
3

14

15
Table of contents
Languages:
Other Ezviz Security Camera manuals

Ezviz
Ezviz CS-CV248 User manual

Ezviz
Ezviz CS-CV240-B0-21WFR User manual

Ezviz
Ezviz Mini Pano User manual

Ezviz
Ezviz HUSKY Air CS-CV310 Series User manual

Ezviz
Ezviz CTQ3N User manual

Ezviz
Ezviz C6T User manual

Ezviz
Ezviz C1C User manual

Ezviz
Ezviz C2c User manual

Ezviz
Ezviz HUSKY Air CS-CV310 Series User manual

Ezviz
Ezviz H3c User manual

Ezviz
Ezviz C1C User manual

Ezviz
Ezviz C2c Operating and maintenance instructions

Ezviz
Ezviz Mini O User manual

Ezviz
Ezviz LC3 User manual

Ezviz
Ezviz C3N User manual

Ezviz
Ezviz Mini Trooper User manual

Ezviz
Ezviz HB3-B2 User manual

Ezviz
Ezviz ez360 Series User manual

Ezviz
Ezviz CSBC1-B User manual

Ezviz
Ezviz C8C Lite User manual