FALCON EYE CommPact Instruction manual

Quick User Guide
LCD
Display
Menu
Navigation Keys
Arming
Keys
Service
Call
PGM On/Off Keys
S.O.S Panic Alarm
Accept
Key
Reject
Key
Arm/Disarm/Alarm
status LED
Power/Trouble
LED
Alpha
numeric keys

2
Thank you for choosing CommPact wireless intruder control panel. This quick start
guide describes the main user operating actions of the CommPact . To view the full
version of the user manual, please refer our website www.electronics-line.com.
Full Arm Press
Partial Arm
Press
Perimeter Arm
Press
If required, enter
your user code
Disarm nter your user code In addition,
silences the siren
in alarm event
Panic alarm
Press and hold down +
Fire alarm
Press and hold down +
Medical alarm
Press and hold down +
Check system troubles
Press and scroll the list
Additionally,
silences any
trouble tones
Global Chime
Press
Access Menu Mode
Press then [User Code]
Service Call
Press and then hold
Turn On / O PGM
/  30

3
LEDs Indication
LED:
Off: System disarmed
Green : System armed
Flashing red : Alarm
'OK' LED:
Green: Power OK
Yellow: System trouble
Flashing green: Open zone
Flashing yellow: (Slow) Low
battery, (Fast) A loss
In case o
f
S
y
stem Trouble,
p
ress
to identify the problem.
Edit/Delete User Code
1.From the main display press .
2.Enter master code (Default code 1234)
3.Select [4] User ode and press
4.Select a user and press
5.Select [1] Edit ode.
6.Edit the user code or enter 0000 to delete
7.Press
Bypass / Unbypass a zone
1. From the main display press
.
2. Enter master code (Default code
1234)
3. On the Main menu, press [21]
4. Select a zone and press to
toggle
5. To save the status, press
SMS Control Commands
ontrolling the System through SMS
ommand ode Numbers:
120: Disarm
121: Full arm
122: Part arm
123: Perimeter arm
030: PGM off
130: PGM on
200: System arm status
SMS Structure: [Free text - Up to 43 characters][#][User ode][ ommand]

4
Example: DISARM#1234120
Telephone Control Commands
1.Dial the number o the premises
I your system is connected to a regular phone line dial the number o the panel
and wait or three rings then hang up. Wait at least ive seconds and dial the
number again. On the second ring the control system answers and sounds two
tones.
I your system supports cellular communication dial and wait until the system
answers and two tones are heard.
2.Within 15 seconds, enter the Telecontrol Code (code 29). A ter a tone sounds, press:
3: Full arm
6: Disarm
7: Extend the call
9: Cancel siren
2: 2 Way Audio
430: PGM on
530: PGM o
*#: Disconnect the line
Keyfob
: Full Arm
: Disarm
: Part Arm, PGM
/ : Perimeter Arm, PGM
Connecting to your Web Browser Application
1. Enter the Web page address supplied by your Web service provider
and press Go.
2. Login page:
a. User name and Password – Enter values supplied by your
Web service provider.
b. Passcode – Enter your CommPact user code
3. Click the Enter button
Electronics Line 3000 Ltd. 05/2011 5IN1507 B