FAME DD6600 User manual

Congratulations on your new FAME Digital Drum DD6600!
Thank you for choosing a FAME product. Thanks to efficient development and economical produc-
tion, FAME makes high-quality products at a fantastic price possible.
Please read these operating instructions carefully to be informed about all functions of this product
and keep them for future reference
Have fun with your new product!
Your FAME Team
Guarantee:
The current general terms and conditions and guarantee
conditions of Music Store professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions,
please contact us:
Music Store professional GmbH
Istanbulstr. 22-26
51103 Köln
Managing Director: Michael Sauer
WEEE-Reg.-Nr. DE 41617453
Tel: [phone]
Fax: [phone]
[email protected]
Scope of delivery:
Quantity Content
1x Digital Drum Set
1x Manual
Intended use:
The product FAME DD6600 was designed for use as an electronic drum set. By striking the pads, an
electronic module simulates an artificial drum sound in various forms and can optionally be played via
headphones or external speakers. Incorrect use of the product is considered improper and can lead to
physical injury or property damage.
Damage resulted by improper use is not liable.
It must be ensured that the device is operated exclusively by trained and expert users who are in full
possession of their mental, physical and sensory abilities. Use of other persons is expressly permitted
only at the request of a person responsible for their safety who instructs or supervises the use.
42
DEUTSCHENGLISH
DD6600
Attention!
Please tighten the mesh heads properly after assembly!

43
DEUTSCH ENGLISH
Important safety instructions! Please read before connection!
CAUTION! (Electro Magnetic Interference)
The normal function of the product may be disturbed by Strong Electro Magnetic
Interference. If so, simply reset the product to resume normal operation by follo
wing the owner‘s manual. In case the function could not resume, please use the
product in other location.
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be
kept out of the reach of babies and children due to the danger of suffocation.
Make sure that children never use the device unattended! In addition, make sure
that children do not remove (small) parts from the device, as they could suffocate
by swallowing parts!
DANGER! (Electric shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the
device. Inside the unit there are components which are under high electrical
voltage.
Before each use, check the device for damage or the absence of components,
protective devices or housing parts. If this is the case, do not use the device!
Leave maintenance and repair work to a qualified service workshop or contact
your dealer.
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is dama-
ged, it must be replaced immediately with an original spare part from the
manufacturer. Failure to do so may result in fire or death due to electric shock!
WARNING! (Damage to hearing)
The unit may generate volumes that may cause temporary or permanent hearing
loss. Over time, even seemingly uncritical levels can cause hearing damage. Reduce
the volume immediately if ear noise or hearing loss occurs. If this is not possible,
keep a greater distance or use adequate hearing protection.
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a place with adequate ventilation, out of the reach
of direct heat sources, naked flames and combustible materials and liquids.
The ventilation slots of the device must not be taped or covered.
Hint! (Operating)
All connections of the device should be made before switching on. Use only
high quality cables for the connections.

Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation
(IP20). Never expose the device to rain, moisture or liquids as this may cause
damage.
Vibrations, dust or solar radiation can also lead to damage, avoid them!
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instrument. If this happens,
remove the electric plug from the outlet. Then have the instrument inspected by
qualified service personnel.
Disconnect all cables before moving the instrument.
Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains
voltage. It is highly recommended that you fuse your mains socket with a residual
current circuit breaker (FI).
Please connect the designated AC adaptor to an AC outlet.
If you do not use your device for a longer period of time, disconnect it from the
power supply in order to minimize danger. The same applies to storm conditions
such as thunderstorms, floods, etc.
Hint! (Using racks)
As soon as the unit is mounted on a rack, it must always be ensured that it is
stable and secure.
Hint! (Possible damage due to magnetic fields)
Loudspeakers generate a static magnetic field. Please keep an appropriate distance
from other equipment that may be affected or damaged by an external magnetic
field.
Hint! (Installation)
Be sure to inspect the device for damage before using. Optimum use of the
original packaging or suitable transport or storage packaging to protect the pro
duct when not in use optimally against influences such as dust or moisture, etc.
Hint! (Interferences with other electrical devices)
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DEUTSCHENGLISH
44

DEUTSCH ENGLISH
45
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interfe-
rence in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modification to this system can void the user‘s authori
ty to operate this equipment.
Symbols on device and packaging:
The lightning flash symbol warns the user about non-insulated current and the risk
of electrocution
The exclamation mark symbol warns the user about important maintenance and
operating instructions in the manual
Intended for indoor use
Read manual

DEUTSCHENGLISH
MAIN FEATURES...........................................49
PANEL & DISPLAY DESCRIPTION
Front Panel.....................................................47
Side Panel (Connecting)..................................49
LCD Display.....................................................49
SETUP
Connecting the Pads and Pedals.....................50
GETTING READY TO PLAY
Setting up the Power Supply...........................51
Turning on the Power......................................51
Turning off the Power.....................................51
QUICK PLAY
Drum Kits and Voices......................................52
Selecting a Voice.............................................52
Playing Techniques..........................................53
Cymbal...........................................53
Hi-Hat............................................53
SELECT A PRESET DRUM KIT AND CREATE A
USER DRUM KIT
About the Preset and User Drum Kit...............54
Edit the Drum Kit Parameters..........................54
Edit the Voice Parameters...............................54
Saving a User Kit............................................55
PLAYING ALONG WITH A SONG
Playing Along with a Song..............................55
Muting the Drums in Songs............................56
Metronome....................................................56
RECORD
Preparing Record............................................57
Start / Stop Recording.....................................57
COACH
About Coach Mode........................................58
Coach Mode Control......................................58
Qut Cnt (Quiet Count)....................................59
Change Up.....................................................59
Beat Check.....................................................60
DBT (DOUBLE BASS TRIGGER)
Turn the DBT Function On..............................61
Contents:
TEMPO...........................................................61
UTILITY MODE (UTILITY)..............................62
The Drum Pad Trigger Settings.........................62
The Drum Module Settings..............................64
SETUP MANUAL............................................65
SPECIFICATIONS............................................69
TROUBLESHOOTING.....................................70
CLEANING......................................................71
ENVIRONMENTAL PROTECTION...................71
PROMPT MESSAGES.....................................72
DRUM KIT LIST..............................................72
DRUM VOICE LIST.........................................73
SONG LIST......................................................76
GM DRUM KIT LIST.......................................77
GM BACKING INSTRUMENT LIST..................79
MIDI IMPLEMENTATION CHART...................80
46

DEUTSCH ENGLISH
47
Main Features:
Panel & Display Description:
Front Panel:
Bring the Professional Experience to Your Performance
Natural and Realistic Voices
This digital drum has equipped with all new voices, which vastly improved sound quality and will
reach a super natural and realistic sense for your ears. No matter playing the stroke roll or striking
pads with velocity dynamic, all of these let you enjoy delicate nuances and natural voice, capture the
unique characteristics of acoustic drum kit.
Fashionable Appearance
Compact, elegant appearance, only occupy a little place when fold it up. Except for a perfect learning
assistant, it also can be exquisite furniture decorated in your house.
Amazing DBT Function
Easy to achieve double bass pedal techniques here. The frequency is adjustable.
Scientific COACH Practicing
Provide three coach modes with dozens of common beat practice. Automatically score function intui-
tively reflects practice condition.
USB MIDI Output
This digital drum equipped with an USB MIDI output, it is available to connect with smart devices,
such as an iPad, through a Camera kit.

48
1. [VOLUME] Knob
Adjust the output volume level.
Note:
Rotate the [VOLUME] knob anticlockwise to the
minimum position before power on.
2. [POWER] Button
Press this button to power on/ off the module.
3. [KIT/VOICE] Button
Shortly press: enter drum kit mode.
Press and hold: enter voice mode.
4. [SONG/REC] Button
Shortly press: enter the song mode.
Press and hold: enter the quick record mode.
5. [START/STOP] Button
Start / Stop playing songs.
6. [CLICK] Button
Start/Stop the metronome; enter the metronome
parameter setting mode.
7. LCD Display
Shows the name and parameter settings of Kit,
Voice, Song and so on.
8. [TEMPO] Button
Adjust the tempo value.
9. [DBT] (DOUBLE BASS TRIGGER) Button
Turn DBT function on/ off.
*Turn DBT function on. It can generate two or
three continuous kick sounds when you step on
the bass drum only once. Easy to achieve double
bass pedal techniques.
10. [COACH] Button
Enter learning mode.
11. [DRUM OFF] Button
Mute the drum part of the pattern.
12. [UTILITY] Button
Enter the utility mode.
13. []/[] Buttons
Gradually increasing or decreasing the value of
settings.
14. [PAGE] Button
Switch between the settings of different functi-
ons.
15. [SAVE/ENTER] Button
Save the drum kit / pad settings.
16. DATA DIAL
Use this to select drum kits or to quick edit values
(increase/decrease values).
DEUTSCHENGLISH

49
DEUTSCH ENGLISH
Side Panel:
LCD Display:
17. DC IN jack
Connect the AC adaptor here. Plug the AC adap-
tor cable into the DC IN jack.
18. PHONES jack (1/8”)
Connect stereo headphones here.
19. AUX IN jack (1/8”)
For connecting an extra audio player, for example,
MP3 and so on via a stereo plug. You can enjoy
playing the drum along with your favorite songs.
20. USB MIDI Terminal
Connect the PC/USB host with audio devices.
Note:
Only transmit MIDI data.
21. MIDI OUT Terminal
Use this to connect extra MIDI sequencer.
you can send MIDI data to an extra MIDI device
or a PC/laptop.
22. OUTPUT jack (L/MONO, R) (2 x1/4”)
Connect to your audio system or amplifier.
For stereo output use both the L/MONO and R
jacks. For monaural output use the L/MONO jack
23. CRASH 2 jack (1/4”)
This allows you to connect additional Crash 2.
24. TOM 4 jack (1/4”)
This allows you to connect additional Tom 4.
3. The Second Level Mode
It depends which mode is activated, the LCD
displays will show the current mode.
4. External Device and Strike Strength
Display the connected external device and current
striking strength.
5. Pad Name
Display the current selected pad name.
6. Parameter Type
Display current parameter type, for instance,
Volume, Curve and so on.
7. Parameter Value
Display the value which corresponding to the
parameter or the number of Song/Kit/Voice.
1. Mode
Display the current mode, such as KIT, VOICE,
SONG, and UTILITY and so on.
2. Coach Mode
Display current beat accuracy and rhythm type.

50
Setup:
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF
on the drum and all related device before making any connection.
Connecting the Pads and the Pedals
Standard configuration:
KICK, SNARE (Double trigger), TOM 1~3, CRASH 1 (Choke), RIDE (Choke), HI-HAT,
PEDAL (HI-HAT).
Note:
1. Using the cables provided, connect each Trigger input jack on the rear panel of the
module, and make sure each pad is connected to its corresponding trigger input jack.
2. For details on assembling the drum stand, attaching the digital drum and connecting pads,
refer to the Installation Manual description.
DEUTSCHENGLISH

51
DEUTSCH ENGLISH
Getting ready to play:
Setting up the power supply
1. Connect the DC plug of the AC power adaptor to the DC IN jack on the side panel.
2. Connect the other end of the power cord to the AC outlet.
Notes:
1. Only use the voltage specified as correct for the drum module.
2. Even when the module is turned off, electricity is still flowing to the module at the minimum
level. When you are not using the drum module for a long time, make sure to unplug the AC
power adaptor from the wall AC outlet.
Turning the Power on
1. Please make sure that the volume has been adjusted
minimize.
2. Press the [POWER] button.
3. Listen through the headphone.
4. Striking the pads and adjust the volume by slowly turning
the [VOLUME] knob toward the right direction. Keep
turning until you get an appropriate value.
Note:
Make sure that you have made all necessary connections right
(trigger, audio and so on), turn down all volume controls of the
module and other audio equipments.
Turning the Power off
1. Minimize the volume of the module and connected audio
devices.
2. Turn the connected external audio device off.
3. Press the [POWER] button again.
Note:
The drum module automatically saves all current settings before
it turns off, you can also restore the factory setting by the follo-
wing steps:
a) Press the []/[] buttons simultaneously.
b) Press the [POWER] button.
c) When the LCD displays “FAC SET”, it indicates the factory
setting is finished.
About the Auto Power Off Function
To prevent unnecessary power consumption, this function auto-
matically turns the power off if no buttons or keys are operated
for approximately 30 minutes. If desired, you can disable or
enable this function. Refer to Utility Settings.

52
Quick Play:
Drum Kits and Voices
An acoustic drum has only a fixed kit, but the digital has a lot. It
is a particular characteristic of digital drum.
The structure of a drum kit is shown on the right:
1. Shortly press the [KIT/ VOICE] button, enter the drum kit
menu. The screen is shown on the right:
2. Press the []/[] button or turn the [DIAL] to select your
desired drum kit. (Refer to Drum Kit List)
Selecting a Voice:
While striking the pads, you can enjoy the ensemble sound
effect. If you are not satisfied with the voice of any pads, change
the voice as you want.
1. Press the [KIT/ VOICE] button for 2 seconds to enter the
voice menu. The screen displayed is shown on the right:
2. Strike the pad you want. The screen will display the name
of current pad.
3. While striking the pad, press the []/[] button or turn the
[DIAL] until you get an appropriate voice for your pads.
(Refer to Voice List)
DEUTSCHENGLISH

53
Playing Techniques:
This section introduces various performance functions to make
your performance professional. Similar to an acoustic drum kit,
the digital drum responds differently to various playing techni-
ques and dynamics. All the pads are velocity sensitive. And some
voices change timbre depending on the striking force.
Pad
Only the snare drum can detect both head shot and rim shot.
Head Shot
Strike only the head of the pad.
Rim Shot
Strike the head and the rim of the pad simultaneously. Or you
can only strike the rim of the pad.
Cymbal
Cymbal Bow shot
Playing the middle area of the cymbal.
Choke Play
Both Ride and Crash cymbals have cymbal choke. But hi-hat
don‘t have the cymbal choke.
Choking the crash/ride edge with the hand immediately after
hitting the crash/ride mutes the crash/ride sound.
Hi-Hat
Hi-Hat Pedal Change
With different positions the pedal pressed down, the voice of
pad varied while you are striking the Hi-Hat pad. And this is
similar to an acoustic drum.
Open Hi-Hat
Strike the Hi-Hat pad without pressing the pedal.
Closed Hi-Hat
Strike the Hi-Hat pad with the pedal pressed completely down.
Hi-Hat Pedal
Press down the hi-hat controller’s pedal to create a foot-close
sound without having to strike the hi-hat pad.
Splash
Playing the hi-hat with the pedal fully pressed and then instantly
opening it.
DEUTSCH ENGLISH

54
Select a Preset Drum Kit and Create a User Drum Kit
Edit the Drum Kit Parameters
Change the drum kit volume, the overall effect of drum
kit will be affected. It means if you increase the volume
of drum kit, all volume of the pads will be increased.
1. Press the [KIT] button, the LCD will display the kit
menu.
2. Repeatedly press the [PAGE] button to select the
item that you want to edit.
3. Press the []/[] button or turn the [DIAL] to
adjust parameter value.
Edit the Voice Parameters
Edit parameters of one pad will not affect others. For
example, if you increased the volume of snare, the
other pads wouldn’t change.
1. Press the [KIT/VOICE] button for 2 seconds and
the LCD will display the voice menu.
2. Strike the pad that you want to edit.
3. Repeatedly press the [PAGE] button to select an
item you want.
DEUTSCHENGLISH
About the Preset and User Drum Kit
From No.1 to 30 are preset drum kits, and the drum kits from No.31 to 40 are user drum kits. You can
edit the parameters of drum kit (from No.1-30), and save them into user drum kits (from No.31-40).
Note:
Please save your own parameter or voice after edited, otherwise, all data will lost.
Parameter Value LCD Display Description
KIT NAME Preset: 1~30
User: 31-40
NUM XXX Drum kit selection.
VOLUME 0~127 VOL XXX Adjust the volume of drum kit; the volu-
me of each pad will be changed.
Parameter Value LCD Display Description Triggers
VOICE NAME 1~408 NUM XXX Select a voice. KIK (KICK), Sn (Snare), SnR (Snare
Rim), T1 (Tom1), T2 (Tom2), T3
(Tom3), T4(Tom4), HH (Hi-hat), C1
(Crash1), C2(Crash2), Rd (Ride), Pd
(Hi-hat Pedal), PS (Hi-hat Splash)
VOLUME 0~127 VOL XXX Adjust the volume
of voice.

55
DEUTSCH ENGLISH
Save User Drum Kit
1. While in the drum kit and voice edit menu, press the
[SAVE/ ENTER] button to save all changes.
2. Use the []/[] button or turn the [DIAL] to select a user
drum kit (From NO.31 to 40). The number of kit starts
flashing at the same time.
3. Press the [SAVE/ ENTER] button again; the LCD will display
“OK”, which indicates all data has been saved successfully.
4. Press the []/[] button or turn the [DIAL] to adjust
parameter value.
Playing Along with a Song
In order to have a better performance experience, a variety of styles can be selected. Each one offers
you to practice. (Refer to the Song List) You can play the drums while listening to one of these songs.
A song contains Drum part and Accompaniment part. Drum part means the rhythm you played on
the pads; the Accompaniment part means percussion and melody. The volume of each part can be
adjusted.
Playing Along with a Song
1. Press the [SONG] button to enter the selection
menu.
2. Repeatedly press the [PAGE] button to select the
parameter that you want to edit.
Parameter Value LCD Display Description
SONG SELECT 1~85 NUM XXX Select a song.
ACC VOLUME 0~8 ACC XXX Adjust the background volume.
DRUM VOLUME 0~8 DRM XXX Adjust the drum volume.

56
DEUTSCHENGLISH
3. Use the []/[] button or turn the [DIAL] to
adjust the parameter value. Press the []/[]
buttons simulta neously to mute songs.
4. Press the [START/STOP] button to play/stop songs.
Muting the Drums in Songs
Press the [DRUM OFF] button to enable and disenable
the drum mute function. When DRUM OFF is enabled,
the LED will turn on.
Metronome
Practicing with the metronome is the best way to
follow the beats.
Choose a right tempo for your learning/ performance
require.
Starting/ Stopping the Metronome and Its Feature
1. Press the [CLICK] button. The metronome will
start playing, and the light of the [CLICK] button
will blink with the tempo.
2. Repeatedly press the [PAGE] button to select the
parameter you want to edit. Adjustable parame-
ters are shown below:
3. Use the []/[] button or turn the [DIAL] to
change the parameter value.
4. Press the [CLICK] button again to stop the metro-
nome, the light will be off.
Parameter Value LCD Display Description
TIME
SIGNATURE
0-9/2, 0-9/4,
0-9/8, 0-9/16
SIG XXX Adjust the time signature.
INTERVAL 1/2,3/8,1/4,
1/8,1/12,1/16
SIG XXX Adjust the rhythm interval.
VOLUME 0~5 VOL XXX Adjust the volume of metronome.
NAME 1~6 NUM XXX Select the metronome voice.

57
DEUTSCH ENGLISH
Preparing Record
1. Press the [SONG/REC] button for 2 seconds to
enter the Recordprepare mode, the light of the
[SONG/REC] button start flashing, please select
which user songs(81-85) you want to record.
2. Press the [ST/SP] button, the LCD displays
“RDY---”. It means the record is standby. If you
want to exit the record-prepare mode, press the
[SONG]/ [KIT] button.
Start / Stop Recording
1. You can start recording in real time while in the
preparing record menu, there are two ways to
start record:
• Press the [ST/SP] button.
• Strike one pad.
2. Recoding begins after 4 beats count-in.
3. While recording, the light of the [SONG/REC]
button keeps lighting all the time, and the LCD
will display “ING xxx”, the “xxx” means measure
number.
4. Press the [ST/SP] button again to stop recording,
and the light of the [SONG/REC] button will be
off.
5. The system returns to the last option automatical-
ly. The LCD will display “NUM 81~85”. Press the
[ST/SP] button to play back the recorded song.
Note:
While the record storage capacity is full, the LCD will
temporarily display “REC FUL”, the recording stops
automatically. The UserKitxx shouldn‘t be changed if
you use it to record, otherwise the record playback may
not be correct.
Record
This digital drum offers you easily record your own performance. Maximize 2500 notes could be
recorded in one user song.
Preparing and starting record, refer to the details bellow:

58
DEUTSCHENGLISH
Coach
About Coach Mode
There are three types of exercises in Coach Mode: Quiet
Count, Change Up and Beat Check. Each exercise has
its special practicing characteristics. Automatic grading
function is available for Change Up and Beat Check
types. Try to get a perfect score of 100!
Coach Mode Control
1. Press the [COACH] button to enter coach mode.
Then repeatedly press the [PAGE] button to shift
coach type among Quiet Count, Change Up and
Beat Check. In the meantime, you can set the
accent beat prompt for MEA. According to your
present playing skills, select an appropriate coach
type to practice.
2. Press the [SAVE/ ENTER] button to enter the selec-
ted coach type.
3. Use the [PAGE] button to select relevant para-
meters. Throughout the Coach modes, you will
discover that some of them have programmable
parameters, allowing you to adapt the functions
to your specific needs.
4. Press the [TEMPO] button to adjust practice speed
at any time.
5. Pay attention to the LCD indicators of hitting
accuracy when you are practicing.
Note:
1. Set the automatic grading function to “ON”, only
playing with metronome guidance without bell.
2. Set the automatic grading function to “OFF”, playing
with conventional metronome sound with bell.
6. Press the [COACH] button to exit the Coach
Mode.
The Coach mode is a unique set of exercises. Specifically designed for those learners who want to
build a better tempo, accuracy and stamina, as well as developing a better drum playing skills.
Coach type LCD Display Description
Quiet Count QUT CNt This helps to develop a good sense of time/ tempo. There are 3
types of quiet mode and 5 selectable rhythm types.
Change Up CHG UP 3 types of rhythm pattern to train your beat accuracy. The
rhythm type will change every two measures.
Beat Check BEA CHE Only metronome accuracy practice. There are 13 selectable
rhythm types.
Measure Hint MEA Turn on/off accent hint.

59
DEUTSCH ENGLISH
QUT CNT (QUIET COUNT)
Practice with auto metronome on/ off circularly with
several measures to help you develop a good sense of
time and tempo.
1. Repeatedly press the [PAGE] button to select quiet
count mode.
2. Press the [SAVE/ ENTER] button to enter quiet
count mode.
3. Use the [PAGE] button switch between QUT and
CNT parameters, press the []/[] button or turn
the [DIAL] to select a suitable quiet and count
type.Press the [TEMPO] button to adjust practice
speed at any time.
4. Press the [ST/SP] button to start practicing. There
is a count-in about 1 measure length before
starting. Metro nome sound automatically on/ off,
you have to catch up with every beat you ought
to play, come on!
5. If you want to change another QUT/CNT parame-
ter or just exit coach mode, Firstly, press the [ST/
SP] button again to stop practicing.
Parameter Range Display Description
QUT 1~5 QUT XXX
Use the []/[] button or turn the [DIAL] to
select a suitable quiet type.
CNT 1-1/2-2/1-3 CNT XXX Use the []/[] button or turn the [DIAL]
to select a suitable count type.
1-1: 1 measure counts, 1 measure quiets.
2-2: 2 measure counts, 2 measure quiets.
1-3: 1 measure counts, 3 measure quiets.
Use the [

]/[

] button or turn the [DIAL] to
Change Up
In change up mode, system will automatic change the
style every two measures. Starting from half notes, the
note values will gradually become shorter, and will then
return to half notes; this change in rhythms will be
repeated. The icon on the LCD will flash for times when
the rhythm type is ready to change.
1. Repeatedly press the [PAGE] button to select
change up mode.
2. Press the [SAVE/ ENTER] button to enter change
up mode.
3. Use the []/[] button or turn the [DIAL] to select
a suitable rhythm pattern.
4. Use the [PAGE] button to switch to score editing,
press the []/[] button or turn the [DIAL] to turn
score function on/ off. The default score setting is
“OFF”.

60
DEUTSCHENGLISH
5. Press the [ST/SP] button to start practicing. There
will play a length of one measure count-in before
starting. This system automatic change the style
every two measures. In addition to, the next
rhythm will flash for times on the LCD when the
rhythm type is ready to change.
6. If the score setting is “ON”: Auto stops practicing
and displays your score after circularly playing
several times. Or, Press the [ST/ SP] button to stop
practicing and back to the main page of change up
without display your score. If the score setting is
“OFF”: Press the [ST/SP] button to stop the
practicing mode.
Beat Check
In order to improve playing accuracy of beat, practice
with the metronome basic beat type. If the score func-
tion is on, system will display your practicing score after
you have finished.
1. Repeatedly press the [PAGE] button to select beat
check mode.
2. Press the [SAVE/ ENTER] button to enter beat
check mode.
3. Use the []/[] button or turn the [DIAL] to select
a beat type to practice. There are 13 beat types to
choose from.
4. Use the [PAGE] button to switch to score editing,
press the []/[] button or turn the [DIAL] to turn
score function on/ off. The default score setting is
“OFF”.
Change Up Range Display Description
CHG 1~3 CHG XXX Use the []/[] button or
turn the [DIAL] to select a
suitable rhythm type.
SCO ON / OFF SCO XXX ON: The score setting
is on.
OFF: The score setting
is off.
Beat Check Range Display Description
BEA 1-13 BEA XXX
Use the []/[] button or turn the
[DIAL] to select a suitable beat type.
SCO ON / OFF SCO XXX ON: The score setting is on.
OFF: The score setting is off.

61
DEUTSCH ENGLISH
5. Press the [ST/SP] button to start practicing. There
will play a length of one measure count-in before
starting.
6. If the score setting is “ON”: Auto stops practicing
and displays your score after circularly playing
several times. Or, Press the [ST/SP] button to stop
practicing and back to the main page of beat check
without display your score. If the score setting is
“OFF”: Press the [ST/SP] button to stop the
practicing mode.
DBT (Double Bass Trigger)
Normally, it is too hard for beginners to play double bass, almost impossible, but we make it possible
now. Turn on DBT function on; it can generate two or three continuous kick sounds when you step on
the bass drum only once. Easy to achieve double bass pedal techniques.
Turn the DBT Function On
1. Press the [DBT] button to turn DBT function on.
The [DBT] button lights up. The screen will display
“DBT 1-x”.
2. Use []/[] or the [DIAL] to adjust the second
trigger time. This setting can be remained even
turn the module off.
3. As you play the bass drum, it can produce a dou-
ble bass technique.
4. Press the [DBT] button again, turn DBT function
off.
Parameter Range Display Description
BEA 1-1/1-2/
1-3/1-4
DBT XXX 1. Press the [<]/[>] button or turn the
[DIAL] to select a rhythm type.
2. 1=original beat, trigger once.
2=original beat/ 2, trigger once.
3=original beat/ 3, trigger twice.
4=original beat/ 4, trigger three times.
3. Power off protection. This setting can
be remained even turn the module off.
Tempo
Press the [TEMPO] button to adjust the tempo value of
metronome and song playback.
1. Press the [TEMPO] button.
2. Use the []/[] button or the [DIAL] to adjust
tempo value.
3. Without any operation within 3 seconds, the sys-
tem will be back to previous menu automatically.
Parameter Value Display Description
Tempo 30-280 TMP xxx Both metronome and song playback are based
on this tempo value.