Fanimation Brewmaster FP10 Series User manual

Copyright 2008 Fanimation, Inc. 2008/05
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free [phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.com
The Brewmaster®Ceiling Fan Assembly
SPECIFICATION SHEET
Product Specifications subject to change
The Brewmaster®
FP10/20 - Pulley Unit / FP1280 - Motor
INSTALLATION REQUIREMENTS:
We recommend that each fan and the motor have 3/4” plywood backing secured to a structural member for adequate
support. Each fan assembly consists of 1 motor and 1 pulley/blade assembly. The motor unit can operate up to 4 pulley/
blade assemblies maximum, which will reduce the rpm. Not recommended for sound-sensitive areas. Call tech support
for more information.
ELECTRICAL REQUIREMENTS:
A 120 VAC, 60 Hz, 15 amps electrical feed, centered under the motor unit and wired to a C20 remote control (supplied) is
required. 3-speed, reversible control receiver included (located in switch cap housing). 220 VAC, 50 Hz export version
is available.
FAN SPEEDS:
Will vary according to the blade set. Material, shape, and size of fan blade will affect the speed of the fan. In general,
the larger blades (22”) will turn slower than the smaller blades (18”) and the narrower blades (narrow oval & oar shaped)
will turn faster than the wide oval blades.
CONTROL OPTIONS:
The hand-held, reversing remote control (C20) and switch cup receiver (CR1280) are included. Optional fan & light
push-button wall control (C21) is available (to be used in conjunction with fan receiver). Both of controls may be used
independently or together. Installation instructions provided with each control.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available, including a single bowl fixture with a maximum of 180 watts and
a variety of four-light fixtures with a maximum of 240 watts. Can be only mounted on the motor switch cap housing.
Installation instructions provided with each light fitter and light kit. See Catalog or visit our website, www.fanimation.com
for more lighting options.
OPTIONAL BLADE SETS:
Blade sets consist of 2 blades; priced and sold separately. Blades are available in reversible oak/walnut, cherrywood,
rosewood, natural palm (BMP series), woven bamboo (BMD series), wicker (BMW series) . Natural palm blades are
available in 3 shapes; Woven bamboo blades are available in 4 finishes and 3 shapes; Wicker blades available in 2
shapes. See catalog or visit our website, www.fanimation.com for more blade options.
DAMP LOCATION:
Fan not rated for Damp Location usage.

The Brewmaster®
Short Neck Fan Assembly
The Brewmaster®
Long Neck Fan Assembly
**Available Finish (codes)
AB Antique Brass
BL Black
PW Pewter
Ordering Information (Items Sold Seperately)
Item Catalog No. Description
Short Fan
Assembly FP10**
1-Short Pulley Assembly
30 ft. of 3/8˝belt
2-traditional blade holders
2-wood blade holders
4-hardware bags
One Motor Unit FP1280**
Three-speed, reversible
1-splice/hardware kit
1-“C20” remote control
1-mounting hardware bag
Blade Sets
(Order Separately)
See page 4 for
other BM series
blade options
FP1022 Reversible Oak/Walnut
FP1026 Cherrywood
FP1030 Rosewood (glossy)
Ordering Information (Items Sold Seperately)
Item Catalog No. Description
Long Fan Assembly FP20**
1-Long Pulley Assembly
30 ft. of 3/8˝belt
2-traditional blade holders
2-wood blade holders
4-hardware bags
One Motor Unit FP1280**
Three-speed, reversible
1-splice/hardware kit
1-“C20” remote control
1-mounting hardware bag
Blade Sets
(Order Separately)
See page 4 for
other BM series
blade options
FP1022 Reversible Oak/Walnut
FP1026 Cherrywood
FP1030 Rosewood (glossy)
220V Model (Export version)
Motor Assembly - 220 volt, 50 Hz
Ceiling Mount, Non-Remote
2 Speeds, RPM: High-91; Low-42
Available in 3 standard finishes
Long Fan Assembly - FP20**
A Overall Length†14´ Max - 4´ Min
B Fan Base Length 12˝
C Fan Base Width 4˝
D Overall Drop 26˝
E Blade Sweep 56˝*
F Motor Base Diameter 8˝
G Motor Assembly Height 10˝
5¾˝from ceiling to
center of double pulley
NOTE: Pulley height
may be adjusted
5¾˝from ceiling to
center of double pulley
NOTE: Pulley height
may be adjusted
NOTE: Motor may be mounted at
either end or in the middle.
NOTE: Motor may be mounted at
either end or in the middle.
Short Fan Assembly FP10**
*NOTE: All other dimensions are identical to the
Long Fan Assembly
**Insert Finish Codes
**Insert Finish Codes
*Wood Blades (22˝palm, wicker, bamboo - 50˝)
†Maximum distance between motor and fan pulley
is 14´, maximum distance between two fan pulley
assemblies is 13½´
*15˝
*17½˝
C
B
A
D
E
F
G
Dimensions shown in inches
**Insert Finish Codes **Insert Finish Codes
Motor Unit FP1280**
FK-2100 Motor: 120 volt, 60 Hz, 0.90 amps Ceiling Mount,
Remote Control Receiver included (in Switch Cap)
Not recommended for sound-sensitive areas.
RPM: High-91; Med-62; Low-42
Available in 3 finishes