Fanmaster Ouber PACISD-PA User manual

PORTABLE EVAPORATIVE AIR COOLER - SINGLE DIRECTIONAL
D.I.Y assemble kit #PACISD-PA
FA NM A ST E R
cooling heating ventilation extraction
ASSEMBLY INSTRUCTIONS

WHAT’S INCLUDED
PART QTY IMAGE
Air outlet assembly
2 x side panels
1 x top cover panel
1 x underneath support
1 x louvre assembly
1
Body 1
Castors
(located inside body) 4
Screws/Accessories
(located inside body)
Control Panel +
Enclosure
(located inside body) 1
Remote Control
(located inside body) 1
Instruction Manual
(located inside body) 1

TOOLS REQUIRED
• Powered drill with Philips head bit
• Screwdriver (philips)
• Pliers
VIDEO INSTRUCTION
WATCH ME
PRODUCT INFORMATION
SCAN ME

ASSEMBLY INSTRUCTIONS
1st Stage - Unpack & Locate Accessories Box:
• Remove body from the carton
• Remove side panel (with yellow label) to access inside of body
• Locate box with castors, instruction manual, control panel, remote & accessories
RECOMMEND 2 PERSONS FOR ASSEMBLY

2nd Stage - Attachment of Castors
• Place down the carton or blanket on the floor
• Carefully lay the body on its side
• Attach 4 x castors with bolts & washers supplied
• Lock all 4 brake functions and lift unit into upright position
3rd Stage - Assembly & Attachment of Air Outlet
• Locate 2 x side panels, 1 x underneath support & 1 x top cover
• Assemble 2 x side panels, 1 x underneath support & 1 x top cover with screws provided

• Attach air outlet to body with screws provided
4th Stage - Cabling, Connection & Louvre Attachment:
• Locate cables - controller cable (black) and earth cables (green/yellow)
• Thread the controller cable (black) through hole on the air outlet head
• Connect controller cable (black) to control panel
• Secure control panel with enclosure to head of unit with screws provided
• Attach earth cable (green/yellow) to synchronous motor on lourve assembly
• Connect synchronous motor cable to controller cable
• Attach the lourve assembly to the air outlet head
• Secure excess cabling of controller (black) and earth cables (green/yellow) on the front metal
support pole in the body of unit with cable ties supplied.
• Replace side panel
• Ready to plug and play.