FART PRODUKT SCREEN Premium User manual

SCREEN Premium, flush mounting, partial building-over,
ZIP guidance
Installation instruction
19.08.2022

01
1.
2.
SCREEN Premium, flush mounting, partial building-over, ZIP guidance
C. guiding ZIP insert
B. revision profile of the guide
A. profile of the guide
Construction of a 3-part guide in a ZIP-System:
A. profile of the guide
C. guiding
ZIP insert
B. revision profile of the guide
The delivery should include:
1. Cassette with cover.
2. Sideguides.

02
4,8 x 13 mm
1. Before assembling the cassette and guides, disassemble the revision profiles of the guides
and remove the ZIP guide inserts.
2. Insert the cassette into the guides.
3. Twist the cassette and the guides together.
Assembling the cassette and guides.
SCREEN Premium, flush mounting, partial building-over, ZIP guidance

03
1500 - 3000 250 - 300
3001 - 6000 300 - 800
19 mm
AA
7,5
10
19
68
120
60
ø4,5
Cassette mounting clip (125 mm cassettes only).
By cassettes 125 mm high and ≥ 105 mm wide, the cassette mounting clips can be used. Clips
facilitate installation and reduce the load on the cassette brackets, and the box can be hung on
them independently of the brackets.
CW [mm] dimenssion A [mm]
width of cassette (CW)
SCREEN Premium, flush mounting, partial building-over, ZIP guidance

04
Installation of guides with using of the screws.
The guides should be screwed with the use of appropriately selected mounting accessories.
They already have the mounting holes prepared in accordance with the selected mounting type
(frontal / lateral mounting).
Frontal mounting.
Lateral mounting.
Mounting the SCREEN blind (remember to connect the power cable!).
Warning! Make sure that the rails are screwed vertically parallel to each other; that the cassette
is mounted horizontally and the diagonals between the guides are equal.
SCREEN Premium, flush mounting, partial building-over, ZIP guidance

05
After lowering the fabric, insert it into the guiding ZIP insert and place the insert in the guide.
After that, latch the revision profile of the guides.
After slipping on the guides, lower the fabric to insert it into the guiding ZIP insert.
Preparing of the ZIP system and putting the guides together.
about 150 mm
SCREEN Premium, flush mounting, partial building-over, ZIP guidance

Fart Produkt Sp. z o. o. Sp. k.
tel. [phone]
e-mail: [email protected]