
Design Certified by Professional Engineer
Replaceable inserts allow single body assembly to be used for multiple tubing sizes
Each clamp is grip-load testes to 3 times the rated load
Each clamp padeye is load tested to 2.5 times the rated load
Padeye MPI after load test by independent third party
Inserts are carburized to provide secure gripping and long life
“Drop-proof” component design
1
2
4
6 7
3
13
12
5
11
8
9
10
Insert Sizes……………………………………………………………………………………..………..3/4” thru 2-3/8”
Load Rating, Lifting, ¾” - 1”…………………………………………………………………………....3,000 lbs.
Load Rating, Gripping, ¾” - 1”…………………………………………………………………..……..3,000 lbs.
Load Rating, Lifting, 1-¼” - 2-⅜”……………………………………………………………..…….….5,000 lbs.
Load Rating, Gripping, 1-¼” - 2-⅜”………………………………………………………..……….….5,000 lbs.
Load Tested (3 times Rating)…………………………………………………………………..….…..15,000 lbs.
Min. Torque Required (Clamp Bolt)………………….………………………………………...……...150 ft-lbs.
Weight……………………………………………………………………………………...……………..25 lbs.
Features
Specifications
Part Numbers
Fig. 1
Key Part Number Description Qty
77-000 Coil Tubing Clamp, Less Inserts
1 77-007 Hinge Plate 1
2 77-002 Clamp Body, Left Side 1
3 77-003 Clamp Body, Right Side 1
4 77-008 Pin 3
5 23-025 Retaining Ring 3
6 13-005 Socket head Cap Screw ¼-20 X 7/8” 4
7 14-071 Set Screw, ½”-13 X 3/8” 4
8 17-000 Swing Bolt, ¾” X 6” 1
9 77-009 Spacer 1
10 11-907 Flange Nut, ¾” 1
11 Spring Pin, Slotted 1
12 77-010 Insert Bushing Nut 4
13 See Chart Insert 2
Insert Size Part Number
3/4” 77-011
1” 77-012
1-1/4” 77-013
1-1/2” 77-014
1-3/4” 77-015
2” 77-016
2-3/8” 77-017