Furniture of America CM7894CK User manual

MODEL #
CM7894CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - Persons
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 8
VERSION# 19-09-19

2 / 8
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 8
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 8

BED
CM7894CK
#1 1pc
5 / 8
#2 2pcs
Headboard Support
#3 1pc
Headboard Leg(L&R)
Headboard
#4 1pc #5 2pcs
Bed Slat
#6 4pcs
Side Rail
Footboard
#7 8pcs
Ø1/4"
Support Leg
176x30x30mm

6 / 8
#A 8pcs #C 10pcs #D 10pcs
Bolt Ø5/16" x 2" Lock Washer Ø5/16" Flat Washer
Ø5/16"
#F 8pcs
Screw #8 x 30mm
#E 1pc
Allen Wrench M4
#B 2pcs
Bolt Ø5/16" x 1-1/2"
#2R
#4
#5
#1
#2L
#3
#6
#7
#G 8pcs
Threaded Stud
Ø5/16" x 3-1/2"
#H 8pcs
Half Moon Ø5/16"
#K 1pc
Wrench 12mm
#J 8pcs
Hex Nut
Ø5/16"

ASSEMBLYINSTRUCTIONS
1
2
7 / 8
Part #4 x1pc
Part #5 x2pcs
#B
#D
#C
#E
#3
#2L
#2R
#1
#A
#E
#C
#D
Part #1 x1pc
Part #2 x2pcs
Hardware
#A x8pcs
Hardware
#B x2pcs
Part #3 x1pc
Hardware
#C x10pcs
Hardware
#D x10pcs
#4
#5
#5
#G
#H#J #K
Hardware
#G x8pcs
Hardware
#H x8pcs
Hardware
#J x8pcs
Align HB legs (#2R/L) and HB support (#3) to the
headboard (#1), then secure by using bolts (#A,B)
with washers (#C,D).
Attach threaded studs (#G) to the headboard (#1) and footboard (#4), then align the
side rails (#5) to the threaded studs (#G) attached to the headboard (#1) and
footboard (#4). Secure by using hex nut (#J) with washers (#H).

#F
ASSEMBLYINSTRUCTIONS
3
4
8 / 8
Hardware
#F x8pcs
Part #6 x1pc
Part #7 x2pcs
#6
#7
x 4
#5
#5
#6
Attach support legs (#7) to slats (#6), then adjust leveler
on support legs (#7) according to ground level.
Align slats (#6) to the side rails (#5), then
secure by using screws (#F).