Better Bathrooms BeBa-26155 User manual

WALL MOUNTED MIRROR
WITH SHELF
BeBa-26155
•BUILT IN SHELF
•IRON FRAME
•DIMENSIONS: 500 x 900mm
•MODERN DESIGN TO FIT IN WITH ANY BATHROOM

2
CONGRATULATIONS ON YOUR PURCHASE
Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less.
If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings
and fixtures to bring your ideas to life, so you can fall in love with your space every day.
We hope you’re happy with your new product. But if you experience any problems, we’re
always here to help.
•Call our friendly UK call centre on 0871 244 0935
(Lines open 9am-4.30pm Monday to Friday, or 9am-2pm Saturday).
•Send us a message via betterbathrooms.com.
SAFETY
•This product may contain delicate parts –be careful during handling and
maintenance to avoid breakage.
•Ensure that the hanging location has been decided upon and marked
clearly to avoid unwanted damage to the wall due to incorrect positioning.
•Check that the mirror is not damaged prior to installation.
•Take care unpacking, do not use a sharp blade to open as this may damage
the mirror and void your warranty.
•Do not under any circumstances seal or adhere the mirror to the wall.
Sealants and adhesives may affect the mirrors rear surface and void your
warranty.

3
PARTS SUPPLIED
PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall.
Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought.
TOOLS REQUIRED to
WALL PLUGS (X2)
SCREWS M4 (X2)
SHELF SCREWS (X3)
TAPE MEASURE
SPIRIT LEVEL
ELECTRIC DRILL
SCREWDRIVER
HAMMER
8mm DRILL BIT
PENCIL

4
FIXING THE SHELF
1. To fix the shelf, lay your mirror down gently on a soft surface away from any
hazards that could scratch or damage the glass or frame.
2. Locate the 3 screw holes on the bottom of the frame.
3. Align the 3 raised sections on the shelf with the 3 holes located on the top of the
bottom bar of the frame. Insert the shelf into the frame using the 3 raised
sections.
4. When aligned, go to the bottom of the frame and screw in the 3 screws provided,
ensuring they are securely fastened and that the shelf is also secure.
HANGING THE MIRROR
At the back of the mirror, there are 2 key holes.
To hang the mirror, you will need to drill two holes into the wall, ensuring
that no wires or pipes are behind the wall before commencing.
1. Measure the distance between the two key holes on the rear of
the mirror.
2. Make a note of the distance and mark their position on the
wall. Use a spirit level to ensure that the holes are level.
3. Drill the 2 holes into the wall at the position marked using a
suitable drill bit.
4. Insert the wall plugs into the holes.
5. Insert the screws into the wall plugs, ensuring their heads are
protruding by approximately 3mm.
6. Check to ensure the screws line up correctly and the mirror can
be safely hung from them.
7. You will now be able to hang the mirror. Carefully lower the
mirror onto the screws, ensuring that it is secure and will not
slide.
CLEANING AND MAINTENANCE
Never use products containing bleach or abrasive cleaners, as these will have a
detrimental effect on the appearance and lifespan of the product.
Use a clean micro fiber cloth to clean the mirror.