Fenix BC20 User manual

Fenix BC20 Bike Light
The Fenix BC20 Bike Light employs four AA batteries to reach 400-lumen max output Three
brightness levels, Daylight and Flashing modes improve cycling safety in tandem with the exclusive
Dual Distance Beam System The quick-release mounting system is convenient and secure Self-
contained and with a remote Turbo pressure switch, the BC20 improves early and late riding visibility
Features
Utilizes Cree XP-G2 R5 cool white LED, max 400 lumens output
Warning LED lights
Instant Turbo activation with the remote pressure switch
DUAL DISTANCE BEAM SYSTEM
3 brightness levels, plus daylight mode and flashing mode
Digitally regulated output - maintains constant brightness
Quick attach and detach handlebar mount sized for 22mm-35mm handlebars
Easy, secure adjustment of the light’s direction
Made of aluminum alloy and quality plastic
Included Components
1 Fenix BC20 Bike Light
2 Handlebar Mount for the BC20
3 Remote Pressure Switch
4 Handlebar Mount Shim (one thick and one thin)
5 One O-ring
6 User Manual, Warranty Card
Battery Specifications
Type Dimensions Nominal Voltage Usability
Ni-MH Battery AA 1 2V Recommended √
Alkaline Battery AA 1 5V Usable √
Non-rechargeable Battery
(Lithium)
AA 1 5V Usable √
Rechargeable Battery
(Li-ion)
14500 3 7V Banned ×
Note: please do not use other types of batteries，misuse may lead to personal injury or cause damage to
the bike light
Technical Parameters
Gene al Mode Wa ning Mode
High Mid Low Daylight
Mode
Flashing
Mode

Output 400lumens 180lumens 80lumens \ 180 lumens
Runtime 2h20min 5h 30min 16h \
Max Distance 120m
Wate
Resistant
IPX-6
Weight Headlight:125g (excluding batteries)
Max Input
Voltage
12 8V
Dimensions Headlight: 104 5mm (Length) ×62 6mm (Width) ×34 5mm (Height)
Notice: The above-mentioned parameters (lab tested by Fenix using four 2500mAh Ni-MH batteries) are
approximate and may vary between the bike lights, batteries and environments
Operation
1 Turn the BC20 on and off by simply pressing and holding the power button for two seconds
2 With the bike light on, cycle through the brightness levels and modes in the order of Low→
Medium→ High→ Flashing Mode→ Daylight Mode by a single press on the headlight power
button。
3 Instant Turbo activation: to activate the highest brightness level with the remaining battery power,
press and hold the remote switch even if the bike light is off, releasing the switch returns the BC20
to the previous state If the current level is the brightest when the light is on, the remote switch
activates the next level down until released
Note:
1 As with any performance light, the BC20 builds up heat when run in High for an extended period
Intelligent circuitry in the BC20 downshifts the light to Mid to guard against overheating
2 The BC20 retains the last brightness level used even after batteries are changed
Mounting Instructions
Batte y Replacement
1 Unplug the headlight from the battery case by pushing the side buttons on the battery case and then
pulling them outward
2 Insert the batteries observing the correct polarity direction of + and –
3 Insert the headlight into the battery case, the headlight and the battery case will be connected when a
noticeable “click” is heard
BC20 Mounting inc. Remote Switch
1 Loosen the fine adjustment screw of the handlebar mount before clamping the mount to the bar by
securely tightening the set screw
2 Open the rubber seal under the bike light and plug the cable of the remote pressure switch into it
3 Slide the headlight into the mount until an audible “click” is heard
4 Attach the Remote Switch to your bars where it is easy to operate, using the Velcro strap provided

Note:
1 Adjust the direction of the headlight before testing the BC20’s power and functions
2 Use shims provided to size the handlebar mount to the bike’s bar
Safety Tips
Impo tant Notice:
1 BC20 is a high-intensity lighting device and capable of causing eye damage so avoid shining the light
directly into the eyes
2 Avoid touching the metal parts of the BC20 as LED lights accumulate heat when powered up
3 Water resistant to IPX-6, BC20 can be used in humid conditions but is not rated for water immersion
4 Please keep it out of the reach of children
5 When not in use, take out the batteries to avoid battery leakage or damage to the bike light
6 Please don't disassemble the sealed parts, as doing so can cause damage to the BC20 and will void the
warranty
7 Long-term use can result in O-ring wear To maintain a proper water seal, replace the ring with an
approved spare
Night Riding Tips:
1 Never ride alone
2 Always let someone know where you are
3 Wear a helmet and reflective clothing
4 Carry an auxiliary light and emergency supplies
5 Make sure the headlight, bike mount and battery case are securely fastened
Product Warranty
We will replace products afflicted with manufacturing defects within 15 days of purchase and repair a
light free of charge within 24 months of purchase if problems develop with normal use; if repair is
required after 24 months from the date of purchase, we will charge for parts The total repair fee is
dictated by the cost of the replaced materials
Product Registration
We kindly suggest that you register your product on the official website of Fenixlight Limited
(www fenixlight com) You’ll receive an extra six months of warranty coverage once you have
successfully registered By participating in an optional customer survey, you are entered in a drawing for
free Fenix products
FENIXLIGHT LIMITED
Tel: [phone]/93 Fax: [phone]
E-mail:info@fenixlight com
www fenixlight com
Address: 8/F, 2nd Building, DongFangMing
Industrial Center, 33rd District, Bao'an,
Shenzhen 518133, China