modway Vigor EEI-4213 User manual

EEI-4213/4214/4215 TABLE
Customer Service 609-256-9000︱www.modway.com
Page 1of 2
Thank you for purchasing the MODWAY TABLE.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
EEI-4213-BLK EEI-4214-BLK Hardware:
EEI-4215-BLK
Components:
Flat Washer x16
1. Top x1 2. Leg x4
B.
Bolt M6x16mm x16
A.
C.
Allen Wrench x1

EEI-4213/4214/4215 TABLE
Customer Service 609-256-9000︱www.modway.com
Page 2of 2
STEP 1:
1. Please put Top (1) upside down on a carpeted or padded surface.
2. Attach 1 piece of Leg (2) to the Top (1) by using 4 pieces of Bolts (A) with 4 pieces of Flat Washers (B)
as shown. Use Allen Wrench (C) to fully tighten Bolts (A) clockwise as shown.
3. Repeat the same steps for other 3 pieces of Legs (2).
STEP 2:
Carefully turn over the assembled Table.
Assembly is complete. Your Table is ready to enjoy now!