modway Tracy MOD-5243 User manual

AM4 x 32MM WOOD SCREW
MOD-5243
Hardware for Support Rail on
MIRROR
Component :
1- DRESSER
2- MIRROR
3- SUPPORT RAIL
Page 1/3
x6
Customer Service 908-368-1025 www.modway.com
3
2
1
Hardware for Support Rail on
Dresser
BM4 x 32MM WOOD SCREW x4
Thank you for purchasing the MODWAY MIRROR !
Before you start,here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the mirror, we recommed that it is assembled by two adults,on a carpeted or
padded area, in the room that it is intended for.Approx assembly time:30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled.Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten.Depending on use, it may be necessary to tighten
the components from time to time,so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.

Place
Place
A x 6
Hardware & Tool required
STEP 1 :
1. Attach Mirror(2) and Support Rails(3) on a carpeted or padded area as shown.Attach Support Rails(3) into Mirror(2) by
inserting M4 x 32mm Wood Screw(A) into the holes on the back of Support Rails(3) and Mirror(2).Tighten with Screw Driver.
STEP 2 :
Customer Service 908-368-1025 Page 2/3
Following
Marking
A
3
2
1
B
1. Attach Support Rails(5) and Mirror(4) with Dresser(3) together.Then, insert M5 x 32mm Wood Screw (D) through
the Support Rails(5).Tighten with Screw Driver.
B x 4
Hardware & Tool required
MOD-5243
www.modway.com

Place
Place
STEP 3 :
Customer Service 908-368-1025 Page 3/3
OR
Assembly is completed.
The Dresser(with mirror support) is ready to enjoy now !
MOD-5243
www.modway.com