Fermax DUOX PLUS User manual

DUOX PLUS BASIC RELAY
Reference: 3233
This relay allows the most basic and common
functions to be carried out: opening a door, activating
a light, etc.
For more advanced functions not available in this
relay, FERMAX has the DUOX PLUS relay...
DESCRIPTION
This relay allows the most basic and common functions to be carried out: opening a door, activating a light, etc.
For more advanced functions not available in this relay, FERMAX has the DUOX PLUS relay ref. 3267.
Programming is very simple, even if the factory default parameters are already the ones desired by the installer, you will not
even have to program anything. Just connect and that's it.
Using jumper JP1, the relay can be programmed as:
Block Relay (Default value: block = 00): Only the devices in that BLOCK can activate the relay (outdoor panels, guard unit or
monitors / telephones)
General Entrance Relay: All users of the installation can activate the relay.
The relay can be programmed to activate with the following actions :
Door opening.
F1 (default activation parameter).
F2
Call from the panel or concierge.
The relay activation time can also be programmed: [1 s, 99 s]. The factory default is 4 s.
CONNECTIONS
Bus Input: to connect the DUOX PLUS bus.

Bs, -: for the connection of a hall exit button to open the door.
+12: 12 Vdc auxiliary output (max: 300 mA).
C, No, NC: Potential free relay contacts. 250 Vac / 30 Vdc - 3A. Max.
ON: LED indicating that the relay has been activated.
TECHNICAL SPECIFICATIONS
DESCRIPTION
JP1: Work mode selector
• GE: GENERAL ENTRANCE mode
• BL: BLOCK mode
TERMINAL STRIPS
• +12: 12 Vdc auxiliary output (max: 300 mA).
• C, No, NC: Potential-free relay contacts. 250 Vac / 30 Vdc - 3A. Max.
• ON: LED (Green) indicating that the relay has been activated.
BUS INPUT: Connection strip to the DUOX PLUS Bus.
PRG BUTTON : To enter PROGRAMMING mode and define the ACTIVATION TIME.
EXTERNAL PUSH BUTTON CONNECTIONS: By shorting BS and -, the relay will activate for the configured ON TIME.
INDICATIVE LEDs:
• PWR (Red): Indicates that the device receives the necessary power to work.
• MODE (Blue): Indicates if the device is in PROGRAMMING mode and the stage of the procedure it is in.
QR TO THE USER GUIDE : when scanning this QR with the mobile, it takes the installer to the technical manual of the product.
TECHNICAL CHARACTERISTICS
Power supply: 18-24 Vdc
Consumption:
Standby: 1.2 W
Relay ON: 7.2 W
Operating temperature: [-5ºC, + 40ºC]
Relative humidity: [5%, 95%]
Dimensions: 86 (height) x 106 (width) x 31 (depth) mm
DIN 6 rail mounting (including side fixing brackets to screw, width 106 mm). Eliminating the lateral fixing brackets for the
screws the width is 89 mm (DIN 5).

PARAMETERS VALUES DEFAULT VALUE
GENERAL / BLOCK ENTRANCEwith jumper JP1 (GE / BL) BL (with JP1)
BLOCK NO. 00-99 0
ACTIVATION COMMAND Lock release, F1, F2, Call from panel or guard unitF1
ACTIVATION TIME (Tact) 0-99 s. 4 s.
NOTE: if the factory default parameters are already those desired by the installer, you will not have to program anything.
Connect and go.
Weight: 0,1586 kg
Size of product when packed: 6,4x10,8x9,6 cm
EAN 13: 8424299032337