Festool MFT 1080 User manual

AVAILABLE THROUGH:
Your Festool dealer, or
Festool USA/Tooltechnic Systems, LLC
140 Los Carneros Way, Goleta, CA 93117
Phone: [phone] • Fax: [phone]
www.festoolusa.com
The MFT connectors fit the
“T” slots around the
perimeter of the MFT
PRODUCT INFORMATION
MFT table connector
Item No. 484 455 (pack of 1)
2 are needed to connect 2 tables together
The MFT connectors (on
the outside) are thicker
than the guide rail
connectors
Two 1080 MFT’s joined
together side by side to
form a large work surface
Two 1080 MFT’s joined
together end to end to
form a long work surface
PRODUCT DESCRIPTION:
The MFT table connector can be used to connect
2 or more Multi-Function Tables to get a larger
work surface. These strong metal bars with 4 set
screws slide into the “T” track spanning the tables
to be joined as shown below.
SUGGESTED USAGE:
For big jobs where a large surface with very versatile
clamping options is needed. MFT’s can also be joined
together and be used with a long guide rail
(e.g. FS 1900/2) to increase the cutting
capacity of the MFT.
BENEFITS:
• Large work surface that supports big work
pieces – secure working environment can
enhance working speed and results.
• Increases cutting capacity of single MFT’s and
makes them more versatile – better use of
existing equipment
• Sturdy construction and high quality materials –
long product lifetime saves on replacement costs.
RELATED PRODUCTS:
• MFT 1080 (item no. 492 652): Large, strong,
sturdy and portable work table for shop-level
precision on the jobsite.
• MFT 800 (item no. 492 651): Smaller version of
the MFT 1080, but with all of the same features.
• Replacement top (item no. 489 396 for MFT
1080; item no. 486 565 for MFT 800)