FH Group FB078102 User manual

For more info, call 1-800-928-5518
or email us at [e-mail]
https://www.fhgroupauto.com/installation/
[e-mail]
Have Questions About Your Order?
FH Group® representatives are ready to help!
Watch Our Installation Videos
Watching our instructional videos FIRST will save time
and answer most of your questions. With some
patience and proper installation, you can enjoy beauti-
fully fitted covers before you know it (turn over to learn
where you can watch our videos).
W-3

Video instructions are available at https://www.fhgroupauto.com/installation
Locate the strap at the back of the cushion. Stretch it
out and slide the entire cover over the headrest,
pulling the cover down a bit. Position the cover's back
strap in the middle of the seat.
To continue, open the hook-and-loop seal at the top of
the cover and pull the rest of the cover down over the
upper portion of the seat.
Once the cover fits snuggly, close the top by securing
the hook-and-loop pieces together around the
headrest supports.
Locate the two butterfly discs on the back of the
cushion. Push the butterfly discs through the seat
crevice and position the discs upward against the
back of the seat.
The back of your seat should resemble the image
above. NOTE: If there is a flap at the back of your seat,
you can unhook and then re-hook the flap to push the
discs through.
For a more secure fit, remove the hooks from the bag
to attach the front strap underneath the seat. WE
SUGGEST WEARING PROTECTIVE EYEWEAR FOR THIS
STEP! You may have to look underneath or feel around
for a secure place to hook the strap.
Encase the headrest with the provided cover. Start
from either side of the headrest and slide the cover
over sideways for a secure fit.
1234
567
FB078102/ FB088102/ FB089102/ PU088/ PU089
Instruction Manual