Field Tuff Tuff FTF-063PTSD User manual

3PT 6’Spike Drag
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
04272021
Model # FTF-063PTSD

Page of 6
2
Thank you very much for choosing this product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer cannot be responsible
for issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted us to
determine if it can or should be performed on the product.
For technical questions please call 1-218-943-6296.
TECHNICAL SPECIFICATIONS
Item
Description
Coverage
6’ wide area
Spikes
3.75” long
Category
Fits category 1 tractors
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this 3PT 6’ Spike Drag until
they have read this manual and have developed a thorough understanding of how the spike
drag works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS

Page of 6
3
WORK AREA
•Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
•Keep children and bystanders away while operating a 3PT 6’ Spike Drag. Distractions can
cause you to lose control, so visitors should remain at a safe distance from the work area.
•Be alert of your surroundings. Using a 3PT 6’ Spike Drag in confined work areas may put you
dangerously close to cutting tools and rotating parts.
PERSONAL SAFETY
•Stay alert, watch what you are doing and use common sense when using a 3PT 6’ Spike Drag.
Do not use a 3PT 6’ Spike Drag while you are tired or under the influence of drugs, alcohol or
medication.A moment of inattention while operating a 3PT 6’ Spike Drag may result in serious
personal injury.
•Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
•Use safety apparel and equipment. Use safety goggles or safety glasses with side shields
which comply with current national standards, or when needed, a face shield. Use a dust mask if
working in dusty work conditions. This applies to all persons in the work area.Also use non-skid
safety shoes, hardhat, gloves, dust collection systems, and hearing protection when
appropriate.
3PT 6’ Spike Drag USE AND CARE
•Do not modify the 3PT 6’ Spike Drag in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications
for which the 3PT 6’ Spike Drag was designed.
•Always check for damaged or worn out parts before using the 3PT 6’ Spike Drag. Broken
parts will affect the 3PT 6’ Spike Drag operation. Replace or repair damaged or worn parts
immediately.
•Do not place additional weight on the 3PT 6’ Spike Drag.
•Use the 3PT 6’ Spike Drag on flat and level surfaces. Pulling a load on a slanted or uneven
surface can result in loss of control or injury.
•Store idle 3PT 6’ Spike Drag. When 3PT 6’ Spike Drag is not in use, store it in a secure place
out of the reach of children. Inspect it for good working condition prior to storage and before
re-use. Always store with the spikes down.

Page of 6
4
ASSEMBLY
1. Install 29pcs Spikes (#5) on the Pipes (#1#2#3) with Self-locking nuts (#13) as below
picture shows. Note: The bottom face of the spikes are all facing back.
2. Insert Lift connecting plate (#6) and Right connecting plate (#7) into the Pipes (#1#2#3) in
turns.
3. Install remaining 16pcs Spikes (#5) on the Pipes (#1#2#3) with Self-locking nuts (#13) as
below picture shows. Note:All the Spikes are facing same direction.
4. Attach connecting board on the pipes and Connect flat bar (#9) with Self-locking nuts (#11)
and Bolt (#12). Install Regulating flat bar (#8) on the last hole. Attach Regulating flat bar (#8)
and middle pipes with Bolt (#12), Spring washer (#14), Washer (#15) and Bolt (#16).

Page of 6
5
5. Attach Fixed flat bar (#10) and two Lift connecting plates (#6) and Right connecting plate
(#7) with Self-locking nuts (#11) and Bolt (#12).
6. Attached Long chain (#17) and Short (#18) to Lift connecting plates (#6), Right connecting
plate (#7) and 3pt connector (#4) with Self-locking nuts (#11) and Bolt (#12). Insert Pin
(#19) into 3pt connector (#4).
MAINTENANCE
•Maintain your 3PT 6’ Spike Drag. It is recommended that the general condition of any 3PT 6’
Spike Drag be examined before it is used. Keep your 3PT 6’ Spike Drag in good repair by
adopting a program of conscientious repair and maintenance. If any abnormal vibrations or
noise occurs, have the problem corrected before further use. Have necessary repairs made by
qualified service personnel.

Page of 6
6
DIAGRAM & PARTS LIST
Part#
Description
Qty.
Part#
Description
Qty.
1
Pipe 1&2
2
11
Self-locking nuts M10
15
2
Pipe 4&5
2
12
Bolt M10x25
16
3
Pipe 3
1
13
Self-locking nuts M12
45
4
3pt connector
1
14
Spring washer 10
1
5
Spikes
45
15
Washer 10
1
6
Lift connecting plate
1
16
Bolt M10
1
7
Right connecting plate
1
17
Long chain
2
8
Regulating flat bar
1
18
Short chain
2
9
Connect flat bar
1
19
Pin
2
10
Fixed flat bar
2
For replacement parts and technical questions, please call 1-218-943-6296.
WARRANTY
One-year limited parts warranty
PO BOX 203
Miltona, MN 56354
MADE IN CHINA