Field Tuff FTF-60DPTB User manual

60" Tow-Behind Dir t Pulverizer
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
12082021
Model # FTF-60DPTB

Page of 6
2
Thank you very much for choosing this product! For future reference, please complete the owner’s record
below: Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer cannot be responsible
for issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted us to
determine if it can or should be performed on the product.
For technical questions please call 1-218-943-6296.
TECHNICAL SPECIFICATIONS
Item
Description
Tube Frame
6” x 6” x 60”
Teeth
21 ripper teeth (replaceable)
Material
Steel
Tire
15 x 6.00 x 6 pneumatic tires
Trailer jack Travel
8”
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this 60" Tow-Behind Dirt
Pulverizer until they have read this manual and have developed a thorough understanding of
how the 60" Tow-Behind Dirt Pulverizer works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS

Page of 6
3
WORK AREA
•Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
•Keep children and bystanders away while operating a 60" Tow-Behind Dirt Pulverizer.
Distractions can cause you to lose control, so visitors should remain at a safe distance from
the work area.
•Be alert of your surroundings. Using a 60" Tow-Behind Dirt Pulverizer in confined work
areas may put you dangerously close to cutting tools and rotating parts.
PERSONAL SAFETY
•Stay alert, watch what you are doing and use common sense when using a 60" Tow-Behind Dirt
Pulverizer. Do not use a 60" Tow-Behind Dirt Pulverizer while you are tired or under the
influence of drugs, alcohol or medication. Amoment of inattention while operating may result in
serious personal injury.
•Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
•Use safety apparel and equipment. Use safety goggles or safety glasses with side shields
which comply with current national standards, or when needed, a face shield. Use a dust mask
if working in dusty work conditions. This applies to all persons in the work area.Also use
non-skid safety shoes, hardhat, heavy-duty work gloves, dust collection systems, and hearing
protection when appropriate.
60" Tow-Behind Dirt Pulverizer USE AND CARE
•Do not modify the 60" Tow-Behind Dirt Pulverizer in any way. Unauthorized modification
may impair the function and/or safety and could affect the life of the equipment. There are
specific applications for which the 60" Tow-Behind Dirt Pulverizer was designed.
•Always check for damaged or worn out parts before using the 60" Tow-Behind Dirt
Pulverizer. Broken parts will affect the 60" Tow-Behind Dirt Pulverizer operation. Replace or
repair damaged or worn parts immediately.
•Use weight trays and fill with water for added weight. DO NOT exceed those limits.
•Distribute the load evenly. Uneven loads may cause the 60" Tow-Behind Dirt Pulverizer to tip,
resulting in personal injury to the operator or others.
•Use the 60" Tow-Behind Dirt Pulverizer on flat and level surfaces capable of supporting the
60" Tow-Behind Dirt Pulverizer and its maximum load. Pulling or pushing a load on a slanted or
uneven surface can result in loss of control.
•Store idle 60" Tow-Behind Dirt Pulverizer. When 60" Tow-Behind Dirt Pulverizer is not in use,
store it in a secure place out of the reach of children. Inspect it for good working condition prior
to storage and before re-use.

Page of 6
4
ASSEMBLY
1. Secure Connecting Tube (#8) to Main Frame (#1) with Bolt (#20) and Nut (#20-1).
2. Install Upright (#2) to Main Frame (#1) with Bolt (#16) and Nut (#16-1).
3. Attach Trailer Coupler (#12) to Middle Tube (#3) with Bolt (#17) and Nut (#17-1) first, and then
attach Side Tube (#4) to Middle Tube (#3) with Bolt (#18) and Nut (#18-1). Finally, install the
whole part to Connecting Tube (#8) with Bolt (#19) and Nut (#19-1), connect Upright (#2) and
Middle Tube (#3) with Turn Buckle (#13).
4. Secure middle of Trailer Jack (#11) to Upright (#2) with Pin (#24).Connect bottom of Trailer Jack
(#11) to H-Frame (#5) with Pin (#24). Also connect H-Frame (#5) with Connecting Tube (#8) by
using Bolt (#21) and Nut (#21-1), install Tire (#30) on the H-Frame (#5) with Washer (#28) and
R-Pin (#29).
5. Connect one end of Side Arm (#9) to Main Frame (#1) with Nut (#15), the other end to V-Drag
(#6 and #7) with Bolt (#23) and Nut (#23-1). Install V-Drag (#6 and #7) by using Bolt (#22) and
Nut (#22-1). Install the whole part to the middle of Trailer Jack (#11) with 2 ends of Anchors
(#27) which are on the Chain (#26).
6. Install Spike Teeth (#10) to Main Frame (#1) with Bolt (#25) and Nut (#25-1).
OPERATION
WARNING: Sharp edges on teeth, USE CAUTION.
MAINTENANCE
•Maintain your 60" Tow-Behind Dirt Pulverizer. It is recommended that the general condition
of any 60" Tow-Behind Dirt Pulverizer be examined before it is used. Keep your 60" Tow-Behind
Dirt Pulverizer in good repair by adopting a program of conscientious repair and maintenance. If
any abnormal vibrations or noise occurs, have the problem corrected before further use. Have
necessary repairs made by qualified service personnel.

Page of 6
5
DIAGRAM & PARTS LIST
Part#
Description
Qty.
Part#
Description
Qty.
Part#
Description
Qty.
1
Main Frame
1
14
Pipe Plug
1
21-1
Nut M12
2
2
Upright
1
15
Nut M12
2
22
Bolt M10x30
4
3
Middle Tube
1
16
Bolt M10x75
2
22-1
Nut M10
4
4
Side Tube
2
16-1
Nut M10
2
23
Bolt M10x60
2
5
H-Frame
1
17
Bolt M12x75
2
23-1
Nut M10
2
6
V-Drag Right
1
17-1
Nut M12
2
24
Pin Φ10x60
4
7
V-Drag Left
1
18
Bolt M12x85
2
25
Bolt M10x40
21
8
Connecting Tube
2
18-1
Nut M12
2
25-1
Nut M10
21
9
Side Arm
2
19
Bolt M10x100
2
26
Chain
1
10
Spike Teeth
21
19-1
Nut M10
2
27
Anchor M6x60
2
11
Trailer Jack
1
20
Bolt M10x65
4
28
Washer Φ26
4
12
Trailer Coupler
1
20-1
Nut M10
4
29
R pin 3*65
2
13
Turn Buckle
1
21
Bolt M12x100
2
30
Tire
2
For replacement parts and technical questions, please call 1-218-943-6296.

Page of 6
6
WARRANTY
One-year limited parts warranty
PO BOX 203
Miltona, MN 56354
Made in China