Field Tuff FTF-2GBF4S User manual

4pc S-Tine Attachment
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
01062020
Item# FTF-2GBF4S

Page of 4
2
Thank you very much for choosing this product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer cannot be responsible
for issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted us to
determine if it can or should be performed on the product.
For technical questions please call 1-218-943-6296.
INTENDED USE
S-Tine Attachment for the 3pt Garden Bedder/Hiller to cultivate or loosen soil before planting.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this s-tine attachment until
they have read this manual and have developed a thorough understanding of how the s-tine
attachment works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
•Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
•Keep children and bystanders away while operating the s-tine attachment. Distractions can
cause you to lose control, so visitors should remain at a safe distance from the work area.
•Be alert of your surroundings. Using the s-tine attachment in confined work areas may put
you dangerously close to cutting tools and rotating parts.

Page of 4
3
PERSONAL SAFETY
•Stay alert, watch what you are doing and use common sense when using the s-tine attachment.
Do not use the s-tine attachment while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating the s-tine attachment may result in serious
personal injury.
•Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
•Use safety apparel and equipment. Use safety goggles or safety glasses with side shields
which comply with current national standards, or when needed, a face shield. Use a dust mask if
working in dusty work conditions. This applies to all persons in the work area.Also use non-skid
safety shoes, hardhat, gloves, dust collection systems, and hearing protection when
appropriate.
S-TINE ATTACHMENT USE AND CARE
•Do not modify the s-tine attachment in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications
for which the s-tine attachment was designed.
•Always check for damaged or worn out parts before using the s-tine attachment. Broken
parts will affect the s-tine attachment operation. Replace or repair damaged or worn parts
immediately.
•Do not exceed the s-tine attachment load capacity.
•Distribute the load evenly. Uneven loads may cause the s-tine attachment to tip, resulting in
personal injury to the operator or others.
•Use the s-tine attachment on flat and level surfaces capable of supporting the s-tine
attachment and its maximum load. Pulling or pushing a load on a slanted or uneven surface can
result in loss of control.
•Store idle s-tine attachment. When s-tine attachment is not in use, store it in a secure place
out of the reach of children. Inspect it for good working condition prior to storage and before
re-use.
MAINTENANCE
•Maintain your s-tine attachment. It is recommended that the general condition of any s-tine
attachment be examined before it is used. Keep your s-tine attachment in good repair by
adopting a program of conscientious repair and maintenance. If any abnormal vibrations or
noise occurs, have the problem corrected before further use. Have necessary repairs made by
qualified service personnel.

Page of 4
4
DIAGRAM & PARTS LIST
Part#
Description
Qty.
1
S-tine
4
2
Mounting Bracket
4
3
Shovel
4
4
Bolt M12*80
4
5
Washer M12
4
6
Nut M12
4
7
Bolt M10*35
4
8
Washer M10
4
9
Nut M10
4
For replacement parts and technical questions, please call 1-218-943-6296.
WARRANTY
One-year limited parts warranty
TG
PO BOX 203
Miltona, MN 56354