Fieryred JT-LT2-UFA 2 User manual

LED TAIL LIGHTS
Please read this manual carefully before use
JT-LT2-UFA*2
USER MANUAL

Fieryred, founded in March, 2016 and born of the passion to fulfill four-wheel drive lovers' demand
for affordable, yet high quality 4x4 equipment, takes prides in designing, engineering and providing
rock solid 4x4 products to let you rediscover the fun of off-roading.
Based in the United States, Fieryred is a professional supplier of 4x4 equipment, currently provides
off-road recovery gears & tools as well as aftermarket vehicle parts that are designed to offer you
ultimate experience with exceptional value.
It is the passion, coupled with a continuing commitment to quality and unswerving dedication to
customer, that distinguishes Fieryred from the competition. At Fieryred, we strive to excel your
expectation, and permeate that conviction into every product that wears the Fieryred brand.
Wherever your passion takes you, Make Your Own Path.

CONTENTS
1 (Pair) Jeep Gladiator JT 2019-2021 LED Tail Lights 1 (Set) Mounting Accessories
TOOLS NEEDED (NOT INCLUDED)
Drill
Socket Wrench
SAFETY INSTRUCTIONS
Please note that these LED tail lights are designed for halogen models of Jeep Gladiator JT 2019-2021
without blind spot sensor ONLY!
Please note that the mounting bracket is designed to mount the anti-flicker, not the tail light!
DO NOT mount the anti-flicker on surfaces made of plastic that is likely to melt under high temperatures.
Always turn the key off and disconnect the battery before working on vehicle electronics.
Do not disassemble or modify the tail lights.
Please make sure that the tail lights are firmly installed before driving.
Please check the functionality of the tail lights each and every time you start your vehicle.

INSTALLATION OF ANTI-FLICKER
Locate an ideal area to install the anti-flicker on a metal surface of your vehicle.
Place the mounting bracket onto the metal surface and mark 2 holes which can be aligned with the holes
on the anti-flicker. Remove the mounting bracket and drill the 2 holes.
Install the anti-flicker with the mounting bracket on the metal surface using the supplied bolts and nuts.
Tighten the bolts.
You can also install the clips on the mounting bracket, and clip the mounting bracket with the anti-flicker
onto your vehicle. In this way, you will not need to drill holes.
1.
2.
3.
4.
SPECIFICATION
Bulb Type: LED
Bulb Manufacturer: OSRAM
Housing: PC
Lens: PC
Sealing: Silicone
Color Temperature (Turn Signal): 3,000 K
Color Temperature (Reverse): 6,000 K
Expected Lifespan of Bulbs: 50,000 Hours
Operating Temperature Range: -40°C (-40°F) ~ 150°C (302°F)
Waterproof: IP67 Rating
DOT Compliant: Yes

INSTALLATION OF TAIL LIGHTS
Lower the tailgate and remove the 2 screws using your socket wrench.
Gently pull the tail light off the truck, and unplug the tail light from the factory harness.
Plug the new tail light to the factory harness.
Push the new tail light into position and loosely reinstall factory screws.
Press firmly on the new tail light and fully tighten the screws.
Repeat the above steps with the other new tail light.
1.
2.
3.
4.
5.
6.

WARRANTY
Subject to the duration and conditions of the limited warranty stated below, Fieryred warrants to the
original retail purchaser that its products are free from defects in material and workmanship for a period
of 2 years from the date of receiving the product from Fieryred or its authorized distributor/dealer. All
other warranties and representations express or implied, are hereby disclaimed, including fitness for
merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited
warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of
all goods and products selected.
This limited warranty does not cover damage or impairment in any part due to misuse, improper
installation, accident or contact with on-road or off-road hazards, product modification, improper or
inadequate cleaning and/or maintenance.
This warranty is not transferable from the original buyer. For the original Buyer to be eligible for the
limited warranty coverage, the Buyer must provide proof of purchase.
Customer's remedy hereunder shall be limited only to refund or replacement (at Fieryred's option) of
any defective part(s) returned to Fieryred. And Fieryred will pay for the cost of shipping or transportation
of defective part(s). The determination of whether or not a returned part is defective or subject to
coverage under the limited warranties stated herein shall be made at Fieryred's sole discretion.
This limited warranty gives you specific legal rights and you may also have other rights, which may vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply as to you. Also, some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Fieryred reserves the right to discontinue product lines and substitute products, or provide other
remedies than those listed in this limited warranty for those discontinued products.
For more information, please visit https://fieryred.com/