FINVIE FIN-3 User manual

USER'S
MANUAL
Refrigerator Water Filter
REPLACES FILTERS:
WF2CB
PURE SOURCE 2
FC100
FIN-3

INITIAL INSTALLATION
PART 2
Press the button to the right of the filter to release it.
Pull the old filter straight out and discard.
Push the new filter in,you will hear it “CLICK” into place.
The filter releases a water valve that lets water flow through the filter.
To condition the filter system,run water through the dispenser for approxi-
mately 3 minutes before use.
PART 1
FINVIE is top quality brand of water filter, our manufacturer is one of only
two companies' export filters have passed NSF certification, we have top
production technology and professional machine, adopt the better
materials into the filters for great filtration effect.
1. Adopt Sri Lanka High quality activated carbon, provide better effect
of filtration and environment-friendly and resource-efficient.
2. Filter shell plastic is made of high purity polyethylene from Germa-
ny, lighter and stable.
3. The glue comes from LG in Korea, which ensures that the size of
each honeycomb hole is uniform for ensure the filtering effect.
FINVIE OVERVIEW

PART 3
POINTS FOR ATTENTION
PART 4
WARNING!
To reduce the risk associated with choking, do not allow children under
Tips:
Flush 4 gallons (15.142 liters) of water before using the filter.
Replace filter every 3-6 months or 300 gallons to maximize contaminant
reduction.
IMPORTANT:
The filter should be changed at least every 3-6 months.
Air trapped in system may cause water and cartridge to eject. Use
caution when removing.
Condition of water and amount used determines life span of water
filter cartridge. If water use is high, or if water is of poor quality,
replacement may need to take place more oen.
Air trapped in system may cause water and cartridge to eject. Use
caution when removing.
To reduce the risk associated with choking, do not allow children
under 3 years of age to have access to small parts during the
installation of this product.

NOTICE
To reduce the risk associated with property damage due to water
leakage:
1. Read and follow use instructions before installation and use of
this system.
2. Installation and use must comply with all state and local plumbing codes.
3. Do not install if water pressure exceeds 100 psi (6.8 bar) If your water
pressure exceeds 60 psi (4.1 bar), you must install a pressure-limiting
valve. Contact a plumbing professional if you are uncertain how to
check your water pressure.
4. Water hammer conditions exist you must install a water hammer
arrester. Contact a plumbing professional if you are uncertain how to
check for this condition.
5. Do not install on hot water supply lines. The maximum operating
water temperature of this filter system is 100º F (38º C).
6. Protect filter from freezing. Drain filter when temperatures drop
below 33ºF (0.6ºC).
7. The disposable filter cartridge should be replaced every 3-6
months at the rated capacity, or sooner if a noticeable reduction in flow
rate occurs.
3 years of age to have access to small parts during the installation of
this product.
CAUTION!
If air has been trapped in the system, the filter cartridge may be
ejected as it is removed. Use caution when removing.

PART 5
FQAS
Q: The water is coming out dirty/gray aer I installed the filter. Is this
normal?
A: Yes that is normal. There is a carbon block inside the filter and sometime
during shipping the filter gets knocked around and some of that carbon
gets loose. If you drain 2-3 gallons, the water will become clear.
Q: Aer installing a new filter element, the water flow rate is slower.
What should I do?
A: Don't worry, the filtered water is cleaner. We use activated carbon
from Sri Lanka. The carbon rod is a honeycomb hole of uniform size,
which can better intercept the particles in the water.