FIORENTINI DELUXE 55-60 Instructions for use

ING. O. FIORENTINI S.p.A.
INDUSTRIAL CLEANING MACHINES
AUTOSCRUBBER MACHINE
MOD. DELUXE 55-60
OPERATING INSTRUCTIONS
AND MAINTENANCE

INDEX
1.
GENERAL INFORMATION
1.1. Used symbols…………………….…….........................……......……….page
1.2. Notes................................................…………...…………......……….......…...….........
1.3. Manual references......…………………………....…...………….....………….…………
1.4. Warranty..............................................................…….……...…………...….…...........
1.5. Conformity declaration......................................…………...........………….…...………
2.
SUPPORT FEATURES AND SPECIFICATIONS
2.1. Identification………………......…...............................….…………….….…….........….
2.2. Description and components……………...……………………………….…….…......…
2.3. Specifications................................…........……………………….....…........…………...
3.
SECURITY
3.1. Correct use…………..………....……………....…....……………….....…………......…..
3.2. Misuse…………………………………………………………………..……………………
3.3. Recommended equipment…………………………………………………………………
3.4. Operators status..............……………….......……………...………….............…………
3.5. Protection and alarm systems…………..................…...…………..........……………...
3.6. Safety devices...............................................…………..….…....…………………........
3.7. Diagnostic signalling of safety………………………………………….………………….
3.8. Residual dangers……………………………………………...……………………………
3.9. Safety signals………………………………………………..……………………………...
4.
INSTRUCTIONS FOR STARTING AND USE
4.1. Transport and handling.................….....................…....………….….….…......……….
4.2. Storage..............................................…………….…………..................………………
4.3. Instructions to unpack the machine...........................……………………........…...…..
4.4. Handle the unpacked machine….….…..........………………………..……........………
4.5. Installation…...............................................................………………..……...........…...
4.5.1. Batteries installation …..........……..….......……………….…...….….........…....…...
4.5.2. Charger installation …………………………………………………………………….
4.6. Control devices……………………………………………………………………………...
4.6.1. Control bridge……………………………………………………………………………
4.7. Functioning…………………………………………………………………………………..
4.7.1. Starting and machine preparation…………………………………………….……….
4.7.2. Choice of detergent……………………………………………………………………..
4.7.3. Regulation of driving position…………………………………………….……………
4.7.4. Rudder pedals functions………………………………………………………………..
4.7.5. Regulation of detergent solution………………………………………………………
4.7.6. Squeegee adjustment…………………………………………………………………
4.7.7. Water discharge…………………………………………………………………………
4.7.8. Regulation of scrubbing width…………………………………………………………
4 .7.9. Brushes replacement…………………………………………………………………..
4.7.10. Squeegee blades replacement……………………………………………………….
Congratulations for your choice!
FIORENTINI S.p.A. thanking you for the preference to our product, would like to remind you that
FIORENTINI’s S.p.A. production covers manufacture and marketing of industrial cleaning machines
and is currently a Leading industry in this sector .
Our tradition and competence guarantee technical quality of your choice; actually all our products are
being built first quality materials through criteria that can give reliability, solidity and functionality
satisfying every kind of customers.FIORENTINI has recently obtained the quality system certificate
conforming to the requirements of UNI EN ISO 9001:2000.
We wish therefore inviting you to contact us, unhesitatingly,for every kind of request, as technical or
commercial; we’ll be pleased to be at your disposal for any information you may need.

5.
MAINTENANCE
5.1. Maintenance tabel…………………..……………..................….....…..…………...........
5.2. Battery maintenance………………………………………………………………………..
5.2.1. Hydrometry………...…………………………………………………………………….
5.2.2. Water filling up...………………………………………………………………………...
5.2.3. Charging limits…………………………………….….…………………………………
5.2.4. Off duty or inactive batteries…………………………………………………………...
5.2.5. Technical features of the charger………..……………………………………………
5.2.6. Batteries disposal………...……………………………………………………………..
5.3. Maintenance of suction motor……………………………………………………………..
5.4. Electrical equipment checking…………………………………………………………….
5.5. Table about tests to be carried out……………..…………………………………………
5.6. Maintenance register……………………………………………………………………….
6.
TECHNICAL ASSISTENCE
6.1. Servicing addresses…………….............…………..................……………..................
6.2. Verbal claim…….…………………………..…………...………………….…............
6.3. Spare parts list………………………………………………………………………………

GENERAL INFORMATION
DELUXE 55-60
Rev. 00 del 05/07/04
4/36
1. GENERAL INFORMATION
1.1. USED SYMBOLS
This symbol is used to quote the attention of the operator on procedures orprecautionsto
be followedtoavoid damagesto usersor to thesupport
This symbol is used to quote the attention of the operator on general informations
1.2. NOTES
1.4. MANUAL REFERENCES
This manual deals exhaustively with all necessary arguments for easy and safe use of the machine, as
recommended by European Directives about product security.
Consequently we recommend to all authorised operators to use it of reading attentively this manual in every
part and carefully applying everithing indicated, asking for explanations to FIORENTINI in case of doubt.The
manual must also be used as referring documentation each time it needs to remind a procedure or operation
or to train new operators.
For publishing reasons, pictures and drawings can look different from reality however without showing
meaning doubts.
Special symbols and bold type and/or sloping remind the attention of the reader on remarkable information,
particularly for safety.
Index of review is reported, each single page, at the bottom. List of revised pages can be found to the end of
the manual.
1.4. WARRANTY
Terms and conditions of warranty are stated to the following points if not differently specified in the order
confirmation.
OBJECT OF WARRANTY
The autoscrubber hasbeen conceived and built for a long-term use without relevant problems; anyway, in
case of anomalies during the warranty periode, FIORENTINI Co. is engaged to repair and/or substitute for
free parts which have shown early brakage or wear and tear caused by defective materials, working defects
or imperfect assembly.
Warrantyis notgiven for parts which earlybrakage or wear and tear are due to:
This manual is property of FIORENTINI S. p. A.
All rights reserved to copy, totally or in part, and transmission to third parties with
mechanic, electronic or whatever means,without permission of manufacturer.It’s been
made in one original copy unless differently specified in order place.
Manual is delivered with relative machine, of whom it constitutes integral part, and it has to be given in case
of transfer of the machine too.We remind to put it in a safe place and keep it for all the machine lifetime.
Purchaser is responsible to show it to qualified people. Incaseoflossaskfora duplicatetoFIORENTINICo..
FIORENTINI decline every responsability for any kind of possible damages caused by persons and/or things
due to non-observance of instructions in this manual.
FIORENTINI reserves the right to introduce in every moment and without notice all the technical and
commercial changes useful considered.Therefore data and information reported could have changes and/or
updating notes.

GENERAL INFORMATION
DELUXE 55-60
Rev. 00 del 05/07/04
5/36
Non-respect of instructions included in this manual;
Breaking and/or changes made up without FIORENTINI’s approval;
Not-use of genuine wear parts;
Interventions made up by unauthorised personnel;
Maintenance missing;
Natural calamities.
WARRANTY TERMS
The Ing.O.Fiorentini S.p.A. general terms conditions also apply to the warranty.
The manufacturer cannot be held responsible in any way for damages resulting from unauthorised
modifications made to the appliance, from the use of unsuitable brushes and accessories and after use of
the device other than that intended.
EXCLUSIONS
Warranty does not cover normal wear parts and materials (brushes, squeegee blades, etc…), and those
parts of whom is impossibile to define lifetime in advance.
APPLICATION MODES
In order to establish anomalies causes, so that warranty could be applied, is necessary that defective
components must be sent to FIORENTINI. Repairing or substituting works under warranty will be, by
FIORENTINI’s opinion, made in its own workshop, or by third party on place. Works on place, are supplied
with customer’s energy sources and exceptional equipment to repairing if necessary.
INTERVENTION DEMANDS
Possibile intervention demands have to be addressed to the technical assistence service of FIORENTINI Co.
in writing or by phone, just after a attentive analysis of fault and of causes, so that it would be necessary to
report to the agent the following data:
Machine model, get from the relative label (point 2.1.);
number, get from the relative label (point 2.1.);
detailed description of defect and the way it happened;
controls and/or regulations made;
code number and position of possibile defective component, deduced from spare parts list;
Components recognized under warranty are delivered ex works; those ones being substituted are property of
FIORENTINI Co..
GOODS TO BE RETURNED
In case of goods to be returned for warranty replacement, it is necessary to have a written acceptance from
FIORENTINI technical department before sending them.
All defective parts must be carefully packed in order to avoid further damages during transport.
Goods must be shipped ex-warehouse and followed by :
serial number of the equipment where they were installed on;
item code of the defective part;
detailed description of the defect and of the condictions where it happened.
In case of defective electric or electronic goods, please return them separately from other materials,
in order to help us in dividing dangerous wastegoods and recicle the (RAEE) as DER 2002/96/CEE LOW.
The relative label missing will involve the loss of any kind of warranty.
1.5. CONFORMITY DECLARATION
Conformity declaration is consigned with the support and the manual of operating and maintenance
instructions.

GENERAL INFORMATION
DELUXE 55-60
Rev. 00 del 05/07/04
6/36

SUPPORT FEATURES AND SPECIFICATIONS
DELUXE 55-60
Rev. 00 del 05/07/04
7/36
2. SUPPORT FEATURES AND SPECIFICATIONS
2.1. IDENTIFICATION
The autoscrubber machine ca be identified with an adesive label put on the protection carter in the backside
of the machine which will clearly report the data referring to “CE” marking.
The label has never to be removed and should be always kept legible. In case of
damaging it’s necessary to ask for a duplicate.The autoscrubber machine cannot be
commercialized without the label.
2.2. DESCRIPTION AND COMPONENTS
The autoscrubber machine DELUXE 55-60 has been designed for treatment of flat areas through washing
and following process of water drying. The power supply is furnished of a series of accumulator batteries,
that charge all the engines and the electrical controls.
The machine, depending on the model, can be supplied with one or two rotating brushes having in charge,
assisted by water and detergent action, to wash the areas.As the machine advances the brush in the back
(squeegee), touching the floor take the water that,at the same time, is aspired and piped in the recovery
tank.
The testboard controles some of the functions of the machine and put at the operator’s disposal a signalling
system, through lighting leds, of the remaining charge of the battery. With the testboard is possible to carry
out the following functions:
to start the washing brushes;
to start the suction motor;
to switch on and off the machine;
The bearing structure of the machine is made of a steel zinc-plated chassis or in stainless steel, so that to
avoid oxidation problems which could compromise the reliability of the machine.
PICTURE N° 2
2.1

SUPPORT FEATURES AND SPECIFICATIONS
DELUXE 55-60
Rev. 00 del 05/07/04
8/36
The main components of the machine are:
steel zinc-plated chassis or stainless steel;
solution tank in plastic PE-HD;
recovery tank in plastic PE-HD complete with pipino flexible system of suction and drainage;
a set of batteries placed in the recovery tank space;
rotatine brushes;
suction system (squeegee);
one free caster-wheel;
two traction wheels;
driving unit;
FIORENTINI Co., taking care of new safety rules in CE comunity , has manufactured the machine following
safety and health rules of the CE normaty. High quality material used, high tecnology and Fiorentini
experience allowed to have performant machine .
Each machine is inspected during the manufacturing time and the final check is done before shipping out the
machine.

SUPPORT FEATURES AND SPECIFICATIONS
DELUXE 55-60
Rev. 00 del 05/07/04
9/36
2.3. TECHNICAL DESCRIPTION
DIMENSIONAL
CHARACTERISTICS
DELUX 55
1 Brush
DELUX 55
2 Brushes
DELUX 60
LENGHT
1350 mm
1180 mm
1300 mm
WIDTH BRUSH COVER
595 mm
615 mm
710 mm
HEIGHT
1040 mm
1040 mm
1040 mm
No.BRUSHES
N° 1 x Ø 550 mm
N° 2 x Ø 265 mm
N° 2 x Ø 305 mm
BRUSH PRESSURE
20 –35 Kg
20 –35 Kg
20 –35 Kg
BRUSH RPM
160 rpm/min.
WORK WIDTH
550 mm
550 mm
600 mm
SQUEEGEE WIDTH
750 mm
750 mm
850 mm
OPERATION
WALK BEHIND
WALK BEHIND
WALK BEHIND
SOULUTION TANK IN
POLYETHYLENE
48 lt
48 lt
48 lt
RECOVERY TAMK IN
POLYETHYLENE
55 lt
55 lt
55 lt
FRONT WHEELS DIAMETER
N° 2 x Ø 160 mm
N° 2 x Ø 160 mm
N° 2 x Ø 160 mm
REAR WHEEL DIAMETER
N° 1 x Ø 80 mm
N° 1 x Ø 80 mm
N° 1 x Ø 80 mm
TRACTION
ELECTRIC
ELECTRIC
ELECTRIC
WEIGHT W/O BATTERIES
105 Kg
105 Kg
105 Kg
BATTERY COMPARTMENT
SIZE (LxWxH)
360 x 330 x 260
mm
360 x 330 x 260
mm
360 x 330 x 260
mm
ELECTRIC CHARACTERISTICS
VOLTAGE
24 V (2x12V –140
Amp/h)
24 V (2x12V –
140 Amp/h)
24 V (2x12V –
140 Amp/h)
BRUSH GEARMOTOR
N°1 x 24V 500W
N°2 x 24V 200W
N°1 x 24V 650W
TRACTION MOTOR
24 V - 130 W
24 V - 130 W
24 V - 130 W
SUCTION MOTOR
24 V - 550 W
24 V - 550 W
24 V - 550 W
FUNCTIONAL CHARACTERISTICS
SQUEGEE LIFT CONTROL
LEVER
LEVER
LEVER
BRUSH LIFT CONTROL
FOOT PEDAL
FOOT PEDAL
FOOT PEDAL
PERFORMANCES
WATER LIFT
1800 mm/H2O
1800 mm/H2O
1800 mm/H2O
FORWARD RUNNING
SPEED
0 ÷ 4 km/h
0 ÷ 4 km/h
0 ÷ 4 km/h
MAX SLOP
10 %
10 %
10 %
HOUR SCRUBBING m²/h
2100 m²/h
2100 m²/h
2400 m²/h
AUTONOMY
5 h
5 h
5 h
ECOLOGIC CHARACTERISTICS
NOISE AT DRIVER’ EAR
< 72 dB
< 72 dB
< 72 dB
VIBRATION AT OPERATOR’S
ARM
< 2.5 m/sec2
< 2.5 m/sec2
< 2.5 m/sec2

SUPPORT FEATURES AND SPECIFICATIONS
DELUXE 55-60
Rev. 00 del 05/07/04
10/36
The above characteristics are not a must for the manufacturer so they can be changed
without any notice .In any case ING.O.FIORENTINI Co. Is always at disposal for any
information ( 7.1.).
MEASUREMENT UNIT CONVERSION
Lenght
1 inch = 1” = 25,4 mm
Power
1 kW = 1,36 CV = 1,34 BHP
Temperature
T (K) = t (°C) + 273 / t (°F) = 1,8 t (°C) + 32
Pressure
1 bar =100 kPa = 14,5 psi

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
11/36
3. SAFETY
3.1. CORRECT USE
The machine is a scrubbing machine and has been studied and manufactured to be
used to clean flat floors or with maximum slop of 5%..
3.2. INCORRECT USE
Not authorized operator uses;
Not regular floors cleaning;
Cleaning of surfaces with more than 5% slope;
To use the machine in place with dangerous products;
Floor cleaning with inflammable products;
To use the machine as transport vehicle of person or goods;
Modify or removing protection device;
Charging the batteries in places with no suction or with good ventilationi;
No respect of safety rules from the operators;
Any modification that can modify the correct machine function;
Any modification not authorized by Fiorentini Co.;
Use of acid products that can damage the machine;
Not respect of what mentioned in the operator’s manual.
Read carefully the information labels placet on the machine , don’t cover them for any
reason.
FIORENTINI is not responsabile for the machine use not in a correct way .
3.3. SUGGESTED EQUIPMENT
In order to use in a better way the machine characteristics i ssuggested to use the original parts and spare
parts studied by Fiorentini Co.. In any case the Technical department is at customers disposal in order to
satisfy any needs .

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
12/36
3.4. OPERATOR QUALIFICATION
Follow the request operator qualification for different uses
OPERATION TYPE
OPERATOR QUALIFICATION
Use /Inspection
Taught operator
Installation / disinstallation
Specialized technician
Mechanical parts maintenance
Specialized technician
Electrical parts maintenance
Specialized technician
Ordinary maintenance
Taught operator
Dismantling and demolition
Specialized technician
We recommend to teach the personnel to the use of the machine, above all for that it concernes safety
aspects ; particularly operators must read and understand this manual.
FIORENTINI decline every responsability for accidents to persons or things from using the
machine by non-authorised or unqualified operators.
3.5. PROTECTION AND ALARM SYSTEMS
It is absolutely forbidden to camper with these dispositives, keep them out or
disconnect during the functioning of the machine.
We recommend to verify periodically their efficiency (point 5.1).
Brushes covers
The autoscrubber Deluxe 55-60 can be equipped with one or two scrubbing
brushes, rotatine during the normal use. The accessibility to dangerous areas
has been avoided through fixed plastic protections. The removal of these ones
can just be done voluntarly provoking the separation from the machine.

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
13/36
3.6 SAFETY DEVICES
This machine is provided of the following safety systems.
Jack (pic. 3.1), used similarly for the battery charger. In case of emergency, it can be kept away
from the plug acting on the handle. Before using the machine, the operator must know the safety system
use, in such a way as in case of necessity it can act automatically. Never re-establish the system before the
problem has been resolved, if necessary helped by a technician.
No-crushing security : this machine, to avoid accidental crushings in reverse driving, is equipped
with (pic. 3.2) a large lever , that keeping in contact with the chest of the operator, stops immediately
driving and goes forward, in such a way as avoiding or reducing at minimum possibilities of collision
due to wrong manoeuvres.
3.8. RESIDUAL DANGERS
FIORENTINI has analysed any kind of danger in using the machine to eliminate, or at less to reduce,
accidents to operators, since the projecting phase. To reduce these risks we provided to inform the operators
through signals and showing means and procedures to be adopted.
Crushing risks may come from :
regulation of scrubbing brushes;
regulation of the squeegee;
When regulating the brushes and the squeegee we recommend to be sure that the ignition key is
kept away from the control board to avoid casual switchings.
Special pictograms are placet on brushes covers and on the back side of the tank (pic.4.7)
CRUSHING DANGERS
PIC. 3.1
PIC 3.2

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
14/36
OVERTURNING DANGERS
Overturning dangers may happen:
during the normal use of the machine when exceeding sloping limits as specified in the
manual and if using the machine to clean disconnected surfaces or with holes and high
depressions (see pic. 3.2)
Don’t use the machine to clean up areas exceeding 5% of sloping or presenting
holes, and depressions which might compromise the stability of the machine.
FIORENTINI decline every responsability for accidents to persons or things using the
machine on surfaces that can compromise the stability of the same one.The operator has to
follow recommendations about areas conditions on which he has to work.

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
15/36
3.9. SAFETY SIGNALS
Safety signals include :
DANGERS
Signals are triangular shaped with black
coloured in yellow field pictograms
PROHIBITIONS
Signals are circular shaped with black coloured
in white field red-crossed pictograms
In case of wear and tear,the purchaser must re-establish similar signals of
danger.It’s absolutely forbidden to keep out or to temper with these signals.
What is it ?
This signal shows crushing dangers due to moving parts of the
machine.
What to do?
In phase of installation/maintenance we recommend to keep away
the ignition key from the control board.
What is it ?
This signal shows the prohibition to remove covers in which members
are still moving.
What to do ?
In phase of installation/maintenance we recommend, to remove
mobile protections, to disconnect the ignition key from the control
board. When the machine is in action not enter with body’s parts and
make sure that all covers are well fixed.

SAFETY
DELUXE 55-60
Rev. 00 del 05/07/04
16/36
In case of wear and tear,the purchaser must re-establish similar signals of
danger.It’s absolutely forbidden to keep out or to temper with these signals.
What is it ?
This signal shows crushing danger due to a casual overturning of the
battery protection
What to do?
During the battery charging or while filling up the solution tank we
recommend to provide a useful support
What is it ?
This signal shows explosion dangers due to the hydrogen released in
charging the accumulators.
What to do?
During the battery charging we recommend to place the machine in a
suction chimney or in an airy zone, far from heat sources and
corrosive environments.

INSTRUCTIONS FOR STARTING AND USE
DELUXE 55-60
Rev. 00 del 05/07/04
17/36
4. INSTRUCTIONS FOR STARTING AND USE
4.1. TRANSPORT AND HANDLING
This autoscrubber is delivered to the purchaser in a special package,which features are well showed in
picture 4.1, completely assembled. The package shows the barycentre position indicated with a black
arrow.The forks of the truck or transpallet must be placed in such a way as the black arrow is at the center of
them. The package has to be moved carefully.We recommend not to place packages one on the top of the
other.As agreed with purchaser, the machine can be delivered without package, placed on a bed and
blocked with bands.
At the moment of delivery we suggest to check the machine about accidental damages
while transported and about have received all material indicated in coverings ; in case of
damages or missing parts, please inform the forwarder and the manufacturer that will soon
as possible provide to the mishap.
Missing particular agreements, the goods travel at the purchaser’s risk.
Handling of the machine has to be carried out with suitable lifting apparatus, as showed below. Take always
care about the elevator forks, or the sling bands, that have to be placed with the black arrow, as drawn on
the package, has to be put at the center of the lifting system.Anchorage or slinging points are prepared for
having a good balanced position when lifting up the machine.
PACKAGE TYPE
LIFTING APPARATUS
PIC.
Cartoon or plywood with bed
Elevator with forks
N° 4.2
PIC. 4.1.

INSTRUCTIONS FOR STARTING AND USE
DELUXE 55-60
Rev. 00 del 05/07/04
18/36
Bands to be used must be suitable for the effective loading. Operations must be
executed slowly avoiding oscillations or upsettings. The uncorrect way of operatine
can damage the support or espose to dangers.
Machine dimensions and mass are explained at point 2.3. We strongly recommend
authorised personnel for lifting operations.
LOADING DIAGRAM
4.2. STORAGE
In case the machine is not immediately installed, it has to be preserved in a dry and closed
Place to grant a perfect conservation and efficiency of its body parts. Humidity must be lesser than 80 % and
storage temperature between 3° C t + 45 °C.
4.3. INSTRUCTIONS TO UNPACK THE MACHINE
Cut off the bands being careful of the elastic reversion
Take away on the base of the cartoon the clips that keep it together with the pallet.
Where plywood is take away the clips at both sides and at the base of each panel.
Cut off the clips that stop the machine.
Put the machine at round level.
4.4 HANDLE THE UNPACKED MACHINE
Check the machine and mount the batteries if not installed.
To deplace it, after use, take off the battery cables, the brushes and the squeegee; to deplace it
through a longer space pack the machine once again in its own package.
PICTURE 4.2

INSTRUCTIONS FOR STARTING AND USE
DELUXE 55-60
Rev. 00 del 05/07/04
19/36
4.5. INSTALLATION
The installation must be done by authorized personnel after reading this manual.
4.5.1 BATTERIES INSTALLATION
To install the batteries follow the instructions as below :
Raise up the battery-cover chain guard (pic. 4.4);
install the batteries in the suitable slot as showed in picture 4.4 being sure that no brakings are in the
battery cases;
never add distilled water after charging the batteries;
clean up the surfaces needing to be connected ;
Battery handling is made easier by handles on both sides.
4.5.2 CHARGER INSTALLATION
the battery charging must be done, as previously reminded, predisposing a suitable suction system of gases
coming out during charging. Alternatively it must be done in a dry and airy place, far from heat sources and
corrosive environments.
Protect the electrical system with a delayed switch or with a more capacity fuse than the charger.
Folllow the polarity instructions for the battery inlet.
This machine is equipped with a charger placed inside the battery cover, therefore to charge the batteries
follow the instructions and connect directly the cable to the system.
PICTURE n°4.4
Verify that battery inlet is connected
PIC. N° 4.5

INSTRUCTIONS FOR STARTING AND USE
DELUXE 55-60
Rev. 00 del 05/07/04
20/36
To install the battery charger:
In the front part of the tank you will find some room for the battery charger with two M6 brass inserts. Fix the
battery charger with the mounted support and the plastic cover (particular 1 picture 4.51) on the inserts with
two M6 bolts. After you have fixed the charger, connect the two eyelets to the positive and the negative pole
of the battery (particular 3 picture 4.51).
Remove the plastic from the initial part of the wires you find inside the red sheath between the tank and the
basin and divide them (particular 2 picture 4.51). Connect the wires to the plug in order to connect the battery
charger.
Now you can connect the battery charger to the socket.
In order to charge the gel and acid batteries you must raise the tag on the battery charter (part. 1 picture
4.52) and change the connections as in the chart above.
1 2 3
PICTURE N° 4.51
1
PICTURE N° 4.52