FIORENTINI I32NEW User manual

ING. O. FIORENTINI S.R.L.
INDUSTRIAL CLEANING MACHINES
SCRUBBER MACHINE
MOD. I32NEW-I26NEW-
I21NEW
USER MANUAL

INDEX
1. GENERAL INFORMATION
1.1. Symbols………………………………….…….........................……......…………..page
1.2. Notes…….................................................…………...…………..............…...….........
1.3. Manual consulting…………......…………………………....….........………….…………
1.4. Warranty..............................................................…………...…………...….…...........
1.5. Conformity declaration…….........................................…...........………….…...………
2. MACHINE FEATURES AND TECHNICAL DATA
2.1. Identifying the machine……......…...............................….…………….….……...........
2.2. Description and components.……………...……………………………….…….…........
2.3. Technical data………...................................…........……………………….....…..........
3. SAFETY
3.1. Right use of the machine……....……………....…....……………….....…………........
3.2. Wrong use of the machine .…………………………………………………..…………..
3.3. Suggested equipment……………………………………………………………
3.4. Operator qualify..............……………….......……………...…………...............
3.5. Safety and warning devices ……………..................…...…………............
3.6. Safety systems...............................................…………..….…....…………........
3.7. Safety diagnostic signaling ………………………………………………….
3.8. Other dangers………………………………………………………………………………
3.9. Security signals…………………………………………………………………...
4. INSTRUCTIONS FOR STARTING AND USE
4.1. Trasport and handling……...................….....................…....………….….….…........
4.2. Storage……………..............................................…………….…………....................
4.3. How to unpack the machine...........................……………………........….....
4.4. How to handle the unpacked machine.….…..........………………………..……..........
4.5. Installation…...............................................................………………..…….............
4.5.1. Batteries installation……..........……..….......……………….…...….….........…......
4.5.2. Battery charger installation……………………………………………………………
4.6. Control devices………………………………………………………..
4.6.1. Dashboard…………………………………………………………………………
4.7. Functioning……………………………………………………………………………..
4.7.1. Preparing and starting the machine……………………………………………….
4.7.2. Choosing the right detergent…………………………………………………………..
4.7.3. Driving handlebar regulation…………………………………………………
4.7.4. Rudder bar functioning……………………………………………………………..
4.7.5. Detergent control…………………..……………………………………………………
4.7.6. Squeegee adjustment…………………………………………………………………
4.5.7. Water discharge…………………………………………………………………………
4.5.9. Brushes replacement…………………………………………………………………..
4.5.10. Squeegee blades replacement……………………………………………………….
Congratulations for your choice!
FIORENTINI S.r.l.
thanking you for the preference to our product, would like to remind you that
FIORENTINI’s S.r.l production covers manufacture an
d marketing of industrial cleaning machines and
is currently a leading company in this sector.
Our tradition and competence guarantee technical quality of your choice; actually all our products are
being built first quality materials through criteria that
can give reliability, solidity and functionality
satisfying every kind of customers. FIORENTINI has recently obtained the quality system certificate
conforming to the requirements of UNI EN ISO 9001:2000.
We wish therefore inviting you to contact us, unh
esitatingly, for every kind of request, as technical or
commercial; we’ll be pleased to be at your disposal for any information you may need.

5. MAINTENANCE
5.1. Periodic maintenance……………..……………..................….....…..…………...........
5.2. Batteries maintenance……………………………………………………………………..
5.2.1. Hydrometry ……………………………………………………………………………….
5.2.2. Water filling up …………………………………………………………………………...
5.2.3. Charge limits………………………………………………………………………………
5.2.4. Off duty or inactive batteries …………………………………………………………...
5.2.5. Battery charger technical features……………………………………………………
5.2.6. Batteries disposal……………………………………………………………..
5.3. Suction motor maintenance………………………………………………..
5.4. Electrict equipment control……………………………………………………………….
5.5. Tests to be carried out……………………………………………
5.6. Maintenance register………………………………………………………………….
6. SERVICE
6.1. Service adresses............…………..................……………..................
6.2. Claim report……………………………..…………...………………….…............

GENERAL INFORMATION DELUXE 55
Rev. 00 del 05/07/04 4/36
1. GENERAL INFORMATION
1.1. SYMBOLS
This symbol is used to get the operator’s attention on procedures or precautions to be
followed in order to avoid damages to users or to the support
This symbol is used to get the operator’s attention on general information.
1.2. PREMISE
1.3. MANUAL CONSULTING
This manual deals exhaustively with all arguments that are necessari for an easy and safe use of the
machine as it is recommended by European Directives on product safety.
Therefore we suggest to all authorized operators to read carefully this manual contacting FIORENTINI S.r.l.
for any explanation. The manual has to be used every time the operator forgets a procedure or when new
operators have to be trained.
For publishing reasons, pictures and drawings can look different from the reality but without arising doubts.
Special symbols and bold type and/or sloping get the attention of the reader on remarkable information in
particularl for safety.
The revision index is written on the left at the bottom of every page. The list of those pages that have been
updated has to be found at the end of the manual.
1.4. WARRANTY
Warranty conditions are stated as below when not differently specified in the order confirmation.
WARRANTY OBJECT
The machine has been designed and built for a long-lasting use without relevant problems. Anyway, if
problems arise during the warranty period, FIORENTINI S.r.l. is engaged to repair or substitute for free those
parts that are broken or damaged by defective materials, working defects or imperfect assembly.
Warranty is not given for parts whose early breaking or wear and tear are due to:
FIORENTINI S. r. l.
is the only owner of this manual.
The reproduction of all or part of the manual or the transmission to third parties with
mechanic or electroni
c devices are vorbidden without a written manufacturer’s
authorization. This manual is supplied to the customers in one original copy when
differently specified during the order.
This manual is supplied to the customer with the machine and it must be kept
with it even when the machine
has to be transferred.
Please, keep the manual in a safe place and for all the machine lifetime. Purchaser is responsible for showing
the manual to qualified people. In case of loss ask for a duplicate to FIORENTINI Co..
FIORENTINI S.r.l. is not responsible for any kind of damages caused by people or things due to the non-
observance of the instructions of this manual.
FIORENTINI reserves the right to add at any time and without notice all the technical and commercial
changes considered useful for the customer. Therefore data and information in this manual can be updated.

GENERAL INFORMATION I32P/13139 GODFREYS
Rev. 00 del 05/07/04 5/36
Non-respect of instructions included in this manual;
??Breaking and/or changes made up without FIORENTINI’s approval;
??Not-use of genuine spare parts;
??Interventions made up by unauthorised personnel;
??Missing maintenance;
??Natural calamities.
FIORENTINI S.r.l., its purchasers and its suppliers have the same warranty for the electric and expendable
materials that are sold by external suppliers.
WARRANTY CONDITIONS
The warranty is granted for 24 months since the machine delivery date. This is a single warranty term and it
cannot be extended.
EXCEPTIONS
Expandable materials like brushes, squeegee blades and materials whose lifetime cannot be predetermined
are not under warranty.
APPLICATION MODALITY
Defective components must be sent back to FIORENTINI S.r.l. in order to establish the anomalies causes
and apply therefore the warranty. Repair and replacement under warranty will be done in FIORENTINI’s
workshop, by third parties or in loco. In case of repair or replacement in loco, energy sources and the use of
particular equipment have to be paid by the customer himself.
INTERVENTION DEMANDS
Intervention demands must be sent to FIORENTINI Service Dpt. only after a careful analysis of the problem
and its causes. Following information have to be given to FIORENTINI’s agent:
??Serial number you get it from the silver label sticked on the machine (§ 2.1.);
??Code and position of the component taken from the spare parts list (§ 7.2.);
??A detailed description of the problem and its causes.
The components considered under warranty are delivered ex works; those ones being substituted belong to
FIORENTINI Co..
The machine warranty is no more available in case of the loss of the silver label.
1.5. CONFORMITY DECLARATION
The conformity declaration is released with the machine and the user manual.

GENERAL INFORMATION I32P/13139 GODFREYS
Rev. 00 del 05/07/04 6/36
DICHIARAZIONE CE DI CONFORMITA’
ING. O. FIORENTINI s.r.l.
Loc. Rombola
50030 PIANCALDOLI (FI) ITALIA
DICHIARIAMO SOTTO LA NOSTRA RESPONSABILITA’ CHE LA MACCHINA
Marca FIORENTINI
Tipo
N° serie
Anno di costruzione
2005
RISULTA IN CONFORMITA’
con quanto previsto dalle seguenti direttive e normative armonizzate comunitarie:
DIRETTIVA COMUNITARIA
DIRETTIVA MACCHINE
98/37/CEE
DIRETTIVA BASSA TENSIONE
73/23/CEE
DIRETTIVA COMPATIBILITA’ ELETTROMAGNETICA
89/336/CEE
Ing. O. Fiorentini S.r.l.
Il titolare
Piancaldoli Ing. O. Fiorentini
Luogo e
data Firma

TECHNICAL DATA I32P/13139 GODFREYS
Rev. 00 del 05/07/04 7/36
2. MACHINES FEATURES AND TECHNICAL DATA
2.1. IDENTIFYING THE MACHINE
A silver label is sticked on the protection case of the steering column and clearly shows the data referring to
the “CE” marking.
The label has never to be removed and should always be kept readable. In case of
damage t is necessary to ask for a duplicate. The autoscrubber machine cannot be sold
without the label.
2.2. DESCRIPTION AND COMPONENTS
The autoscrubber machine –I32NEW 13139 -has been designed for the cleaning of all flat surfaces by
means of washing and suction of the washing water.
The electric traction system is supplied by a series of batteries which supply energy to the brushes motors, to
the squeegee motor and to the suction motor.
The machine is equipped with two rotating brushes which wash the surface by means of water and
detergent. Whilst the machine is running forward, the back brush (squeegee) picks the water up that is
directly sucked into the recovery tank.
The accelerator pedal starts both the washing brushes and the suction motor which stop automatically after a
few seconds when you leave the pedal. When the washing brushes standstill, they are non more in contact
with the ground. In this way the bristles will not be damaged while the brushes are not working.
Thanks to the dashboard the operator can control all the machine functions and a series of LEDs shows to
the operator the battery status or the errors detected by the electronic card.
The operator can control all the main machine functions and in particular:
??Start the washing brushes (ELECTRIC JACK);
??Start the suction motor;
??Start or stop the machine.
The machine frame is made of zinc-plated or stainless steel in order to avoid oxidation which could
compromise the machine reliability.
The main parts of the machine are:
??Zinc-plated steel or stainless steel frame;
PICTURE Nr. 2.1

TECHNICAL DATA I32P/13139 GODFREYS
Rev. 00 del 05/07/04 8/36
??PE-HD plastic solution tank;
??PE-HD plastic recovery tank supplied with flexible suction piping system and drainage;
??Series of batteries placed in the recovery tank room;
??Rotating brushes;
??Squeegee (suction system);
??one drinving wheel;
??two traction wheels with differential gears;
??adjustable handle.
FIORENTINI Co., taking the new CE safety rules into consideration, manufactures the machine following the
CE directives about safety and health. The materials high quality, the high technology and FIORENTINI’s
experience guarantee the performance and the reliability of this machine .
Each machine is tested during the manufacturing process and the final check is done before the machine is
shipped out.

TECHNICAL DATA I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 9/36
2.3. TECHNICAL DATA
CARATTERISTICHE DIMENSIONALI—DIMENSIONS
I 21 NEW I 26 NEW I 32 NEW
LUNGHEZZA / LENGHT 1480 mm 1510 mm 1550 mm
LARGHEZZA CARTER SPAZZOLE / BRUSH CASE WIDTH 555 mm 690 mm 850 mm
ALTEZZA / HEIGHT 1050 mm 1050 mm 1050 mm
N° SPAZZOLE LAVAGGIO / BRUSHES NUMBER 222
DIMENSIONE SPAZZOLE LAVAGGIO / BRUSHES DIMENSIONS Ø 265 mm Ø 330 mm Ø 410 mm
LARGHEZZA LAVORO / SCRUBBING WIDTH 570 mm 650 mm 840 mm
LARGHEZZA SQUEEGEE / SQUEEGEE WIDTH 740 mm 830 mm 945 mm
SERBATOIO SOLUZIONE IN POLIETILENE / SOLUTION TANK 100 lt100 lt 100 lt
SERBATOIO RECUPERO IN POLIETILENE / RECOVERY TANK85 lt 85 lt 85 lt
DIAMETRO RUOTA ANTERIORE / FRONT WHEEL DIAMETER 200 mm 200 mm 200 mm
DIAMETRO RUOTA POSTERIORE / REAR
WHEELS DIAMETER 100 mm 100 mm 100 mm
TRAZIONE / TRACTION electric electric electric
PESO IN ORDINE DI MARCIA / WEIGHT OPERATION CONDITIONS 280 kg 285 kg 290 kg
PESO SENZA BATTERIE / WEIGHT WITHOUT BATTERIES 140 kg 145 kg 150 kg
DIMENSIONE VANO BATTERIE (LxLxH) / BATTERIES ROOM SIZE (WxLxH) 390x520x290 390x520x290 390x520x290
CARATTERISTICHE ELETTRICHE—ELECTRIC CHARACTERISTICS
FONTE ENERGETICA / ENERGY SOURCE batterybattery battery
VOLTAGGIO / VOLTAGE 24 V24 V24 V
MOTORIDUT. SPAZZ. LAVANTI A MAGNETI PERMA. / BRUSH GEARMOTOR
2x500w 2x500w 2x500w
MOTORIDUT. TRAZIONE A MAGNETI PERMANENTI / DRIVE MOTOR 370w 19A 320rpm 370w 19A 320rpm 370w 19A 320rpm
MOTORI ASPIRAZIONE / SUCTION MOTOR 500w 20A 16000rpm 500w 20A 16000rpm
500w 20A 16000rpm
CARATTERISTICHE FUNZIONALI—FUNCTIONAL CHARACTERISTICS
GUIDA / DRIVE Ground operator Ground operator Ground operator
AZIONAMEN. SOLLEVAME. SQUEEGEE E SPAZZOLE / SQUEEGEE AND
BRUSHES CONTROL Lever / switch Lever / switch Lever / switch
FRENO DI STAZIONAMENTO / PARKING BRAKE Mechanical by lever Mechanical by lever
Mechanical by lever
PRESTAZIONI—PERFORMANCES
VELOCITA’ DI MARCIA AVANTI / FORWARD SPEED 0 ÷4 Km/h 0 ÷4 Km/h 0 ÷4 Km/h
VELOCITA’ DI MARCIA INDIETRO / REVERSE SPEED 0 ÷2 Km/h 0 ÷2 Km/h 0 ÷2 Km/h
PENDENZA MASSIMA SUPERABILE / HIGHEST SLOPE 10 % 10 % 10 %
PULIZIA ORARIA m²/h / CLEANED AREA m²/h2100m² /h 2500 m² /h 3350m² /h
CARATTERISTICHE ECOLOGICHE—ECOLOGIC CHARACTERISTICS
RUMORE ALL’ORECCHIO DEL GUIDATORE / NOISE AT
DRIVER’SEAR 73 dB(A) 73 dB(A) 73 dB(A)
VIBRAZIONI NELLA POSTAZIONE DELL’OPERATORE / VIBRATION ON
OPERATOR’SSEAT <2.5 m/s² <2.5 m/s² <2.5 m/s²

TECHNICAL DATA I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 10/36
The above mentioned characteristics are not binding for the manufacturer; they can be
changed without any notice . ING.O.FIORENTINI Co. is always at disposal for any
information (par.7.1.).
TABELLA DI CONVERSIONE DELLE UNITA’ DI MISURA
Lenght 1 inch = 1” = 25,4 mm Power 1 kW = 1,36 CV = 1,34 BHP
TemperatureT (K) = t (°C) + 273 / t (°F) = 1,8 t (°C) + 32
Pressure 1 bar =100 kPa = 14,5 psi

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 11/36
3. SAFETY
3.1. RIGHT USE OF THE MACHINE
This machine is a scrubbing machine and it has been designed and built to clean in
an industrial place. It can work on flat surfaces or on surfaces with a slope not
higher than 10% and with a speed not higher than 1 km/h for U-turn.
3.2. WRONG USE OF THE MACHINE
??The machine cannot be drivenby non-authorized personnel;
??The machine cannot wash sloping surfaces whose gradient is higher than 10%
or surfaces with holes;
??The machine cannot reverse with a speed higher than 1 km/h;
??The machine cannot be used in places with dangerous substances and in
particular with explosive atmospheres or with a bad microclimate;
??The machine cannot clean surfaces with inflammable products;
??The machine cannot be used as a means of transport for people or other means
of transport;
??The machine protection devices cannot be modified or tampered;
??Batteries must be recharged in a fanned room;
??The operator have always to respect safety rules;
??The operator cannot use equipments or devices that can create problems to the
machine working;
??The machine components cannot be modified without FIORENTINI’s
authorization;
??The operator cannot use acids that can damage the machine;
??The operator has always to respect the rules written in the user manual.
Please read carefully and do not cover the labels sticked on the machine. FIORENTINI
S.r.l. is not responsible for a wrong use of the machine (see § 3.2.)
3.3. SUGGESTED EQUIPMENT
In order to use the machine in a proper way, we suggest to use the FIORENTINI’s equipment and original
spare parts.
FIORENTINI S.r.l. Technical Dept. is always at your disposal to design components or parts for a particular
use of machine as requested by the customer.

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 12/36
3.4. . OPERATOR’S QUALIFY
The scheme below sumarizes the operator qualify requested for each kind of operation.
OPERATION OPERATOR’S QUALIFY
Driving/control of the machine Trained operator
Installation/ disinstallation Fiorentini technician
Mechanical parts maintenance Fiorentini technician
Electric parts maintenance Fiorentini technician
Cleaning maintenance Trained operator
Dismantling and demolition Fiorentini technician
FIORENTINI S.r.l. suggest to train the operator before using the machine. The operator also must be trained
about safety rules and carefully read this manual.
FIORENTINI S.r.l. is not responsible for any possible damage to people and/or things caused by
the non-observance of the instructions dealt within this manual.
3.5. SAFETY AND WARNING DEVICES
??It is absolutely forbidden to tamper or disconnect safety and warning devices while
the machine is working;
??It is important to check periodically safety and warning devices (see § 5.1.).
Brushes Cases
I32NEW-I26NEW-I21NEW is equipped with two washing brushes that rotate
while the machine is on duty. The machine cannot reach dangerous areas
thanks to two fixed protections –one is made of stainless steel and one of
plastic -set up on each brush.
The operator can remove the brush case only with special tools.
Side Brushes Cases I32NEW-I26NEW-I21NEW is equipped with two side rubbers which avoid to
hit dangerous parts while the machine is working.The two side rubbers can be
removed by means of specific tools only.
Suction engine
protection
I32NEW-I26NEW-I21NEW is equipped with two plastic bulkheads inside the
batteries bonnet. They have to cover and protect the suction motor from acid or
water sprays.
Water tank protection
I32NEW-I26NEW-I21NEW is equipped with a stainless steel protection inside
the batteries bonnet, above the filter tank for water charge. It ha sto protect
batteries from water sprays during the water recharge. The operator can
remove this protection by means of proper tools only.

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 13/36
3.6 SAFETY SYSTEMS
The machine is equipped with the following safety systems:
??Socket (picture 4.5), the same socket used for the battery charger. In case of emergency, this
socket must be taken away from the plug by means of its handle.
The operator must be trained about safety rules. Do never restore this safety system before the
problem has been sorted out. If it is necessary ask for the technician help.
??Safety before working (see detail 1 in picture nr. 3.2), the operator hasto reset the control card
before every start of the machine. The operator has to press the anti-squashing switch choosing
reverse gear firstly and forward gear after.
??Anti-squashing system: this machine is equipped with a safety system that avoids the operator’s
squashing (see detail 1 in picture 3.2). It is based on an emergency leverism that stops the machine
and changes the its direction for a couple of metres when the machine gets in contact with the
operator’s stomach.
3.7 SAFETY DIAGNOSTIC SIGNALING
The electronic card is equipped with a particular system which shows the machine errors through quick
flashings on the battery charger display placed on the dashboard.
The number of switched on LEDs represents one of the errors listed below:
3.8. PERICOLI RESIDUI
Picture 3.2
1
2
1 FLASH Running microswitches fault. One flash shows that one of the running
microswitches is already on
2 FLASHES The battery is down or under tension
3 FLASHES Off duty code
4 FLASHES Engine circiut open
5 FLASHES Fault inside the regulator or the engine
6 FLASHES Potentiometer fault. This disgnostic signaling is off duty for the 2-cable
potentiometer
7 FLASHES MOSFET (Metal Oxide Semiconductor Field Effect Transistor) high
temperature. This alarm is activated when the temperature reaches 75°C ±5°C
and it has to decrease the engine max. current.
8 FLASHES The engine is already rotating, i.e. the operator switches the regulator on while
the machine is descending a slope
9 FLASHES Software fault

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 14/36
3.8. OTHER DANGERS
FIORENTINI S.r.l. analyzes –starting from the design of the machine -all the dangers that can occur while
the machine is operating in order to prevent or at least low the operator’s accidents. Thanks to a series of
signals on the machine the operator can avoid many risks that can occur.
This kind of danger can occur:
??During the side brushes regulation;
??during the batteries recharge because of the fall of the recovery tank.
Whilst regulating the side brushes, the ignition key must be kept away from the dashboard in order
to avoid the casual starting of the machine.
Whilst the batteries recharge, the operator must pay attention that any parts of his/her body enter the
batteries room.
Special labels sticked on the cartes of the brushes or on the recovery tank prevent dangers
to the operator (see § 4.7.).
TURNOVER
This kind of ranger can occur:
??during the normal operating of the machine when you exceed sloping limits as specified in
the manual and you usethe machine to clean disconnected surfaces or with holes and high
depressions (photo 3.2)
??Do not use the machine to wash sloping surfaces higher than 10% or surfaces
with holes or depressions which might compromise the stability of the machine.
FIORENTINI is not responsible for accidents occurred to people or things provoked by a
wrong use of the machine, i.e. using the machine on surfaces which can compromise its
stability.
The purchaser must stick proper labels on the machine to show the operator the right use of
the scrubber.
SQUASHING DANGER

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 15/36
3.9. SAFETY SIGNALS
La segnaletica di sicurezza comprende cartelli di:
DANGERS
Dangers’ signals are triangular with black
pictures on a yellow background
PROHIBITIONS
Prohibitions’ signals are round with black
pictures and a red stripe
The purchaser must replace danger signals on the machine if they are deteriorated.
It is absolutely forbidden to remove or temper danger signals.
What is it?
Squashing danger: it can be due to parts in movement of the
machine.
What to do
During the installation or the maintenance make sure that the ignition
key is not in the dashboard before removing the mobile protections.
What is it?
This signal forbids to remove the protection of pieces in movement.
What to do
During the installation or the maintenance make sure that the ignition
key is not in the dashboard before removing the mobile protections.
While the machine is operating make sure that all covers are well
fixed.

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 16/36
The purchaser must replace danger signals on the machine if they are damaged. It is
absolutely forbidden to remove or temper danger signals.
What is it?
Squashing danger: it can be provoked by the recovery tank overturn.
What to do
During the batteries water filling, pay attention to the recovery tank
casual fall.
What is it?
Explosion danger: it may occur while recharging the batteries because
of hydrogen spread.
What to do
During the batteries recharge, please place the machine under a
suction chemney or in a ventilated area and keep it away from heat
and corrosive substances.

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 17/36
4. STARTING AND USE INSTRUCTIONS
4.1. . TRANSPORT AND HANDLING
The machine is delivered to the purchaser in a proper package (see picture 4.1 below). A black arrow on the
package indicates the barycentre. This arrow must be in the middle of the elevator or transpallet forks. The
package must be carefully handled. Do not place one package on another one. If agreed with the purchaser,
the machine can be delivered without package, placed on a pallet and fixed by means of straps.
The purchaser must make sure that the machine has not been damaged during the
transport and that all papers are on the machine. Otherwise, the purchaser must
immediately contact FIORENTINI in order to sort out the problem.
The purchaser is responsible for the transport of the machine if not differently agreed with
FIORENTINI.
The machine must be handled with proper devices as stated in the scheme below. Please, make sure that
the black arrow on the package are always in the middle of the elevator forks or the sling bands.
PACKAGE HANDLING EQUIPMENT PICTURE
Paperboard or plywood box on
a pallet Fork elevator Nr. 4.2.
The bands usedfor lifting the machine up must have the same loading capacity as
the machine load. Handling operations must be done without causing a loss of
stability of the machine. Otherwise, the machine can be damaged or the operator
can de in danger.
Picture 4.1

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 18/36
FIORENTINI suggest to use authorized personnel (see § 2.3.) to handle the machine.
LOADING SYSTEM
4.2. STORAGE
The machine must be stored in a closed and dry place if not immediately installed in order to keep every part
safe.
Relative humidity must be lower than 80% and the storage temperature must be between 3°C ?t ?+ 45 °C.
4.3. HOW TO UNPACK THE MACHINE
??Cut the straps paying attention to the back spring;
??Remove the staples that join the paperboard and the pallet;
??If the package is mad of plywood, please remove the staples from each side;
??Cut the straps that fix the machine;
??Lay the machine on the floor.
4.4 HOW TO HANDLE THE UNPACKED MACHINE
??Check the machine and install the batteries if not already installed;
??For a brief transport of the machine, please disconnect the batteries cables and remove brushes and
squeegee; for a longer transport, please use the original package of the machine.
4.5. INSTALLATION
Installation must be carried out by authorized personnel after reading this manual.
Picture
4.2

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 19/36
4.5.1 BATTERIES INSTALLATION
??Lift the recovery tank up in order to reach the batteries room (picture 4.3.);
??Install the batteries in their room (picture 4.4.) and make sure that the cases of the batteries are not
broken;
??Never fill distilled water after having recharged the batteries.
??Clean the surfaces for the connections;
??The operator can easily lift the batteries up by means of handles;
??Connect the cables.
4.5.2 BATTERY CHARGER INSTALLATION
Batteries must be recharged in a place equipped with a proper suction system of gases spread during this
operation. Otherwise, batteries must be charged in a ventilated and dry place far from heat sources and
corrosive substances.
Protect the electric network with a delayed switch or with a fuse whose capacity is higher than the battery
charger maximum input.
Control the battery outlet polarity.
Picture
4.4

SAFETY I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04 20/36
4.6. CONTROL DEVICES
4.6.1. DASHBOARD
The dashboard is made of a series of switches that activate or disactivate all the machine functions. The
function of each switch is shown by a picture. Picture 4.6. shows the dashboard of the machine and the
switches function is explained in the scheme in the following page.
Picture 4.6
Connect the battery charger to the machine socket
Picture
4.5
5
1 2
3 4
6