Firefield FF12021G User manual
FF12005, FF12021G & FF12022G
FIREFIELD EMISSARY BINOCULAR SERIES
USER MANUAL
www.re-eld.com
Founded in 2009 and forged in the crucible of a major economic downturn, Fireeld (www.re-eld.com) is laser-focused on delivering
uncompromising value to the legion of integrity-driven, armed individuals depending on hard-earned wages to light the way to victory. The
foundation of Fireeld is built on patriotism and a squad approach to teamwork in order to achieve victory and preserve our way of life.
·
Fireeld offers force multipliers and accessories for mission-critical operations and extreme shooting sports involving ries, shotguns and
pistols. No matter what genre of shooting appeals to emerging rearm enthusiasts, Fireeld provides the tools necessary for your team to
overcome adversity. In a free world FORGED IN VICTORY, Fireeld transforms fear to courage and grit to glory.
© Sellmark Corporation, all rights reserved
ABOUT FIREFIELD EMISSARY BINOCULAR SERIES
The Fireeld Emissary binoculars feature a robust roof prism, allowing for clear viewing. The Emissary’s multi-coated optics, rubber
armored housing, and IP55 water resistant rating makes the binoculars resilient and capable of withstanding outdoor elements and
rough handling. The fold down eyecups allow for trouble-free viewing while wearing eyeglasses. The Fireeld Emissary binoculars take
advantage of an internal focusing lens, making them easy to use for viewers.
1
2
FEATURES
• Multi-coated optics
• Lightweight
• Rubber armored
• Weatherproof
INCLUDED ACCESSORIES
• Lanyards
• Carrying case
• Lens cloth
Technical Specications FF12005 FF12021G FF12022G
Magnication (x) 810 16
Objective lens diameter
(mm)
21 32 32
Exit pupil diameter (mm) 2.6 3.2 2
Eye relief (in/mm) .41/10.5 .47 / 12 .39 / 10
Field of view (degrees) 7.2 5 3.6
Field of view
(ft@1,000yds)
392 261 108
Close focus distance (ft/m) 10.3 18.4 / 5.5 18.4 / 5.5
Length (in/mm) 3.43 / 87 5.4 / 138 5.4 / 138
Width (in/mm) 2.4 / 61 4.4 / 113 4.4 / 113
Height (in/mm) 5.1 1.6 / 40 1.6 / 40
TECHNICAL SPECIFICATIONS
3
DIAGRAM
1) Eyepiece
2) Objective lens
3) Diopter adjustments
4) Central focusing knob
5) Neck strap eyelet
6) Interpupillary distance
5
61
3
4
4
5
2
5
6
1
3
4
2
FOCUS ADJUSTMENT
The focus dial allows the Emissary Binoculars to deliver a clear, sharp image. To focus the image:
1. Turn the central focus dial (3) until the image is focused. Make sure the image is always well focused as this will
prevent eye fatigue.
INTERPUPILLARY DISTANCE
Interpupillary distance is the measurement of the distance between the binocular’s eyepieces. The binocular’s hinge design allows
the binoculars to be adjusted to accommodate different users. To adjust the interpupillary distance (6):
1. Look through the binoculars and locate an object in the distance on which to focus.
2. Move the binocular tubes apart or close together until the object in focus becomes one singular image.
DIOPTER ADJUSTMENT
Adjusting the diopter balances the focus of the left and right viewing elds. The Fireeld Emissary binocular’s adjustment ring (3)
is located on the right eyepiece. To adjust for diopter:
1. Rotate the adjustment ring (3) until the image becomes crisp and sharp.
2. Once set, the diopter setting should stay the same unless the binocular’s operator changes.
6
NECK STRAP
To use the provided neck strap, place one end of the strap through the neck strap eyelet (5) located on the side of the binocular.
Place the strap’s end through the plastic adjustment strap. Next, attach and tighten the loose loop ends to secure the pieces
together. Finally, place the strap around the neck and adjust the length.
MAINTENANCE
Proper maintenance of the Fireeld Emissary binoculars is recommended to ensure longevity. It is recommended that when the
binocular becomes dirty that it is wiped down with a dry or slightly damp cloth. Blow dirt and debris off all optics and then clean
lenses with a lens cleaning cloth. To remove oils or dried water spots, apply a small amount of denature alcohol to a lens cloth
or cotton swab. Clean the surface of the lens and let dry. Finally use your breath to clean the lens once more. To protect the
binocular store it in the protective padded case when not in use. No further maintenance is required. Do not attempt to disas-
semble any components of the binocular.
7
STORAGE
Cover with the objective lens and the eyepiece with the included lens covers. For long-term storage, place the binocular in a cool,
dry and ventilated area.
TROUBLESHOOTING
Proper authorization is required before shipping any product back to Fireeld. Failure to obtain authorization could result in your
product being returned to the wrong address, lost, or damaged. Fireeld is not liable for products returned without authorization.
The image is blurry and not in focus:
1. Rotate the focus dial until the image becomes clear and sharp.
2. Remove any dust or oil off the objective lens or eyepiece.
FIREFIELD WARRANTY
Please visit www.re-eld.com for warranty details and information.
WARNING
Before handling the Fireeld Emissary binoculars read and understand the contents of the Fireeld manual.
• Avoid hitting or dropping the unit
• NEVER look directly into the sun or at other bright light sources with the binocular as this could damage your eye
and cause blindness.
8 9
NOTES NOTES
www.re-eld.com
This manual suits for next models
3
Table of contents
Other Firefield Binoculars manuals
