Firefly GT600 User manual

1 User Manual for Wireless Firefly Microscope GT600 Version: 1.0
WIRELESS MICROSCOPE
THANKS FOR SELECTING A WIRELESS FIREFLY MICROSCOPE
To take full advantage of this product’s advanced capabilities,
and to properly and safely use this product, please read the manual carefully.
GT600
User Manual

2 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Copyright 2011 by Firefly Global. All rights are reserved. No one is permitted to reproduce
or duplicate, in any form, this manual or any part thereof with out permission from Firefly
Global (www.fireflyglobal.com).
Firefly
Global assumes no responsibility for any injury, or for any illega l or impr oper use of
the
product, that may result from failure to use this product in accordance with the
instructions, cautions, warnings, or ind i cati ons for use published i n this manual.
Software in this product is copyright of Firefly Global and its vendors. All rights are reserved.
The software is protected by U.S. and international copyright l a ws and international treaty
provisions applicable worldwide. Under such laws, the licensee is entitled to use the copy
of the
software incorporated w i t h this instrument as intended in the operation of the
product in which it is embe dded . The software may not be cop i ed , decompiled,
reverse-engineered, d
i sass e m ble d or otherwise reduced to human-perceivable form.
This
i s not a sale of the software or any copy of the software; all rights, title, and
ownership of the software remain with Firefly and/or its v e n dors.
Caution:
Changes or mod i fication s not expressly approved by Firefly Global will void the
pu rc haser ’ s autho r i t y to operate the e qui pment and its warranty.

3 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
TABLE OF CONTENTS
Digital Microscope .....................................................................................................1
Table of Contents.......................................................................................................3
Introduction ..............................................................................................................5
Warnings & Cautions.................................................................................................6
Warning .................................................................................................................................... 6
Caution...................................................................................................................................... 6
Check List ..................................................................................................................8
Nomenclature............................................................................................................9
Operation.................................................................................................................10
Setting up the software application：........................................................................................ 10
Connect to PC：....................................................................................................................... 10
Power the Device On：............................................................................................................ 10
Charging Battery:..................................................................................................................... 11
Channel Mapping: .................................................................................................................... 11
Using the Firefly Microscope System:......................................................................................... 12
recommended holding position: ................................................................................................ 12
low ratio 10-100x:.................................................................................................................... 12
high ratio >100x: ..................................................................................................................... 12
high ratio >100x: ..................................................................................................................... 13
Focus：................................................................................................................................... 14
Brightness Adjustment: ............................................................................................................ 14
Using Focus: ............................................................................................................................ 14
Using the image capture control: .............................................................................................. 15
Standby and Remove device:.................................................................................................... 15
Launch the Software Application: .............................................................................................. 16
Viewing the Images: ................................................................................................................ 16
Tool bars ................................................................................................................................. 16
Tool bars ................................................................................................................................. 17
Control tool bars: ..................................................................................................................... 17
Image tool bars: ...................................................................................................................... 17
Device Tool bars: ..................................................................................................................... 18
Maintenance and Service.........................................................................................19
Cleaning recommendation......................................................................................................... 19
Recycling the system components ............................................................................................. 19
Accessories.............................................................................................................................. 19

4 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Service policy........................................................................................................................... 20
Specifications ..........................................................................................................21
Limited Warranty ...................................................................................................22
Troubleshooting.......................................................................................................24
Frequently Asked Questions (FAQs): ......................................................................................... 24
Wireless Interference Recommendations ...............................................................26

5 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
INTRODUCTION
The Wireless Firefly Microscope System consists of a wireless digital Microscope, a compact USB receiver,
software application and a charge cable. Only a computer equipped with a free USB port is needed to use
the system.
The Firefly Microscope System is designed for effective operation under a variety of conditions and typical
video parameters are set at the factory. The software allows users to adjust most parameters including
Saturation, Hue, Brightness, Contrast and Sharpness for desired applications.
System Requirements
The Wireless Firefly Microscope System requires a user PC system running Windows XP Service Pack 2 or
later operating system, a viewing screen, and a PC with an available USB 1.1 or 2.0 port.
Intended use
Wireless Firefly Microscope System is intended to conveniently enable mobile inspection of objects.
User Profile
The Wireless Firefly Microscope System is intended for applications such as:
Art / Watches / Jewelry inspection and repairs
Electronic components inspection and repairs
Coin examination for collectors
Schools and Science Education
Medical examinations
Insect dissection and examination
Plant anatomy inspection
Skin test
Textile inspection
Industrial inspection
Print Check

6 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
WARNINGS &CAUTIONS
Please familiarize all operating personnel with the general saf et y
information in this summary. Specific warnings and cautions a r e also found
throughout this manual.
Warning
A warning statement in this manual iden tif i es a condition or pr act i ce which if
not
corrected or discontinued immediately , could lead to injury, illness, or
death.
Do not use in the presence
of f l amma ble anesthetics.
This
product has no user se rv iceable / replaceable parts. Please refer all
service to authorized service personnel.
This
instrument is not intended to be used in the eye.
This
product generates and r e cor d s reference images from inputs
obtained
from the software application FireflyPro . These reference images
are not intended for medical or other diagnostic purposes.
Caution
A caution statement in this manual identifies condition or practice, which if not
corrected or discontinued immediate l y , could lead to equipment failure,
e
quipment damage, or data loss.

In order to obtain optimum performance and ensure patient safety,
thoroughly read this manual .
Do not use the Wireless Firefly Microscope if
y ou notice any signs of damage
to the components of th e system. Contact customer service f o r
immediate assistance
.
Do not attempt to
disinfect the Wireless Firefly Microscope System using
glutaraldehyde pro du c t s , ethylene oxide gas, steam or any other liquid or
gas disinfectant.
The signal
output (USB P o r t ) connector is intended for con nect i on of only
devices complying wit h IEC 60601 - 1, or other IEC standards (for
example, IEC 60950), as app r opriate to the device. Conn ecting additional
devices to the Wireless Firefly Microscope System is not allowed. You are

7 User Manual for Wireless Firefly Microscope GT600 Version: 1.0
responsible for verifying that the system complies with th e requirements of
the
system standard IEC 60601 - 1 - 1.
This
product complies w i th current re qu ire d standards for
electromagnetic interference and should not present p r oblems to other
equipment or be affected by other devices. As a precaution, avoid using
th is device in close proximity to other e quip ment.
Do not apply alcohol, c h e m icals, or water to the lens. Any liquids entering the
optical
assembly will damage internal comp onents.

8 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
CHECK LIST
Before starting, check that all the following items have been included with your product. If anything is
missing, contact your dealer.
Microscope x 1pc Receiver x 1 pc Tripod x 1 pc
Stand Holder x 1 pc
Power Adapter x 1pc
100-240V AC to 5V USB DC
Notice: Actual Shape may vary.
Software Application CD
Clip x 1 pc USB DC power cord x 1 pc Tripod Adapter x 1pc

9 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
NOMENCLATURE

10 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
OPERATION
To obtain a clear image, please grip the Firefly Microscope; remain still and avoid vibration as much as
possible during observation.
Setting up the software application：
Prior to using the Firefly Microscope for the f i rst t i me, install t he FireflyPro software application following
the
instructions pro v ided with the installation CD .
Connect to PC：
Connect the compact receiver to the PC’s USB port
Power the Device On：
Push the ‘Power Button’ at the rear of the microscope to activate the device. An indicator light will
turn on to confirm the power status.

11 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Charging Battery:
Duration:
The Wireless Firefly Microscope has a built-in high efficiency lithium battery that enables more
than 4.5 hours continuous operation.
Charging the Battery:
Through the mini-USB port at the rear of the microscope, the embedded battery can be charged
with the provided USB DC cable. The cable must be connected to the USB port of a PC or to the
“USB Power Adapter”, which can charge directly from a wall outlet.
Overload Protection:
The overload protection circuit will prevent overcharging when the battery is full and the
“Indicator” will turn green.
Power Indication:
The power indicator light is normally red during operation, but it will turn blue when the
remaining battery life is less than 30 minutes.
The lithium battery is a delicate and consumable item. It is expected to last through years of
use and is guaranteed for twelve months from its purchase against defects. If there is any
battery related issue, please contact customer service immediately. Battery replacement by
unauthorized personnel or replacement with unauthorized batteries may damage the system and
voids the overall warranty.
Channel Mapping:
On the rear right side of the microscope, there is a switch allowing users to set the
wireless channel. Both the receiver and microscope must be set to the same
channel for proper operation:
CH 1: 2.4GHz channel 1
CH 2: 2.4GHz channel 2
CH 3: 2.4GHz channel 3
CH 4: 2.4GHz channel 4

12 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Using the Firefly Microscope System:
recommended holding position:
It is suggested to hold the microscope, transparent cover forward, with the thumb held on
the equipment. This holding position offers relative stability and allows lens control. The index finger is
still free to rotate and adjust the focus wheel (as shown).
low ratio 10-100x:
The digital microscope is placed in the "Base". The open viewing
area at the bottom of the base allows placement of samples under
the microscope for observation.
View Area

13 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
high ratio >100x:
When there is a need to zoom in more than 100 times, maintaining body stability becomes more paramount.
In such instances, a microscope stand is recommended. When a stand is not available, it is suggested that
the digital microscope focus wheel opening should be placed towards the user, and the transparent
cover vertically downward. This enables easy access to the focus wheel and a very stable position. A
smooth desktop may be used as an observation platform. (Shown below)
Device vertically downward (stable observation)

14 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Focus：
Based on the relative height of the observed object, the focus wheel can be turned for a clear image.
When a higher magnification is required, the focus wheel can be turned to the left (see below). If a larger
field of view is required, the microscope can be moved farther away and the focus wheel turned to the
right.
Brightness Adjustment:
On left rear side of the microscope, a knob allows the user to control the
brightness of the LEDs:
Backward Turn: Decrease Brightness
Forward Turn: Increase Brightness
Using Focus:
Default Position: Match the scale 50 to arrow mark.
Free Focus:
Rotate wheel to fine
tune the ima
g
e.

15 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Using the image capture control:
Press and release the Capture button to capture image frames. The
system will generate a shutter sound from the PC speaker as
confirmation.
Captur
Standb
osition. The device must also be turned off through the Windows operating system:
•
s
Digital Microscope in Windows Vista and Windows 7).
port.
nt voltages from
potentially causing hardware damage.
e
y and Remove device:
To temporarily turn off or remove the device, push and release the power button to the “OFF”
p
On your Microsoft Windows Desktop, click My Computer in
the left pane. Double-click the USB Video Device (Wireles
After turning off the device through Windows above, the
compact receiver can be unplugged from the PC’s USB
Using this sequence will avoid transie

16 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Launch the Software Application:
Double-click the FireflyPro.exe icon on your comp ut er de skto p:
Viewing the Images:
FireflyPro software controls your Firefly Microscope. The Microscope communicates with the
PC through the USB compact receiver. The user can configure the video properties, review live
images, capture images, record video clips and perform a variety of powerful measurement
and documentation functions.
The main features of FireflyPro are shown below:

17 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Tool bars
The Tools bars enable quick access to the functions of FireflyPro software. The tool bars can be
grouped into Control, Images and Device tool bar sets.
Control tool bars:
Icon Icon Name Function Description
Play Start the video stream preview
Pause Freeze live video image frame
Video Setting Configure video properities
Video Recording Video recording and settings (frame, period, quality, codec etc...)
Undo Undo the previous Rotation, Text Comment and Zoom
Redo Redo the previous Rotation, Text Comment and Zoom
ROI Select region of interest (ROI) on live video stream
Undo ROI Revoke ROI selection
Rotation Rotate live video 0°, 90°, 180°, 270°
Mirror Mirror live video horizontally
Flip Flip live video vertically
Text Comment Add text layer on image
Image Measure Launch image measurement application
Zoom + Zoom-in live video up to 300%
Zoom - Zoom-out live video down to 10%
Zoom Ratio Set Zoom ratio from 10-300
Image tool bars:
Icon Icon Name Function Description
Save Image Store frozen image
Image Capture Capture and store instant image from live video
Image Browsing Browse images in working directory
Working
Directory Pop-up to select working directory path
Edit working directory path

18 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
Device Tool bars:
Icon Icon Name Function Description
Device Connect Refresh image device connection
Select available image devices, such as Microscope
Select a video format (default 640x480 YUY2)

19 User Manual for Wireless FireflyMicroscopeGT600 Version:1.0
MAINTENANCE AND SERVICE
Cleaning recommendation
CAUTION Do not apply alcohol, chemicals, or water to the lens. Any
liquids entering the optical assembly will damage internal components.
Use a dry cloth to
c l ea n the D i git a l Firefly Microscope System on a weekly basis .
Recycling the system components
Within the EU
Do not dispose of this product as unsorted mun i cipal refuse. Submit for
separate
collection as specified b y Directive 2002/96/EC of the European
Parliament
and th e Council of the European Union on Waste E l ectr on ic and
Ele c t r i cal Equ i pmen t ( W EEE ).
If this product is contaminated, this d i re ct iv e does not ap ply . For more
specific
disposal information contact C ust omer Se rvic e.
Outside the EU
When the product and its components reach end of life, recycle the product
according to national, state, and loca l regulations .
Accessories
REF Description
FY-MU-50 USB Charge Cord, 50cm length
GT600RU USB Compact Receiver for PC
GT600RV USB Compact Receiver for Video
FY-PWR-USB 100-240V AC to 5V DC USB >0.8A

20 User Manual for Wireless Firefly Microscope GT600 Version: 1.0
Service policy
All repairs on products under warranty must be performed or approved by Firefly or its authorized resellers.
Unauthorized repairs will void the warranty. In addition, whether or not covered under warranty, any
product repair shall exclusively
be performed by Firefly- cer t i f i ed service personnel.
If the product fails to function properly — or if you need assistance, service, or spare parts — contact
your Firefly reseller.
Before contacting your reseller , try to duplicate the problem and check all accessories to ensure that they
are not causing the problem. When calling, please be prepared to provide:

Product name and model number and complete description of the problem.

Serial number of your product (if ap pli c ab le ).

Complete name, address and phone number of your fac ility .

For out-of-warranty repairs or spare parts orders, a purchase order (or credit car d ) nu mbe r .

For parts orders, the required spare or replacement part nu mbe r s .
If your product requires warranty, extended warranty, or non-warranty repair service, please contact
your Firefly reseller. A customer service representative will assist you in troubleshooting the problem
and will make every effort to solve it over the phone, avoiding potential unnecessary returns. In case
a return cannot be avoided, the representative will record all necessary information and will provide a
Return Authorization number, as well as the appropriate shipping address. The Return Authorization
number must be obtained prior to any return.
If you have to return your product for service, follow these recommended packing instructions:
 Disconnect all hoses, cables, sensors, power cords, and ancillary products ( as appropriate) before
packing, unless you suspect they are associated with
the problem.
 Wherever possible use the original shipping carton and packing materials.
 I n c lu de a packing list and the Return Authorization number.
It is recommended that all returned goods be insured. Claims for loss or damage to the product
are the responsibility of
the sen d e r .