Fisher-Price DFP09 User manual

DFP09
fisher-price.com
Keep this instruction sheet for future reference,
as it contains important information.
Requires two C (LR14) alkaline batteries for soother
operation and two AAA (LR03) alkaline batteries for
remote operation (batteries not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).

2
WARNING
Consumer Information
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen when baby begins to
push up on hands and knees.
• This product may not attach to all crib designs. Do not add additional strings or
straps to attach to crib or playpen.
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib
or playpen according to the instructions. Check frequently.
• Use as a mobile from birth until 5 months.
• If intended for use on a dresser, wall or ceiling do not place or mount the product within the
reach of a standing baby.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse
this toy.
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information

3
Parts
Mobile Arm
Battery Door
Note: All of the screws used to assemble this toy are attached to the product.
Follow these instructions carefully to fully secure the screws.
Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
Soother Mobile Base
Mobile Canopy
Remote

4
• Fit the mobile canopy into the opening in the soother 1, then slide the mobile canopy until you
hear a "click" 2.
Hint: The mobile canopy is designed to fit onto the soother one way. If it does not seem to fit,
turn it around and try again.
2
Mobile Assembly/Setup
• "Snap" the mobile arm into the mobile base.
Mobile Arm
Mobile Canopy
Soother
Mobile Base
1
C
anop
y
Soother
Assembly step 1 is a one-time/permanent assembly.
Steps 2-4 complete assembly/setup for mobile use.
1
2

5
• “Snap” the mobile arm into the socket in the soother.
4
3
Battery Door
IMPORTANT! The battery door must be assembled to the soother for proper function. You may
want to assemble the batteries in the soother before completing the assembly/setup. See the
Battery Installation section.
• Fit the battery door into the opening in the soother.
Hint: The battery door is designed to fit one way. If it does not seem to fit, turn it around and
try again.
• Tighten the screws in the battery door.
Mobile Arm
Mobile Assembly/Setup

6
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.
Consumer Information
CO
N
SU
MER A
SS
I
S
TAN
C
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
©2015 Mattel. All Rights Reserved. DFP09-0970
PRINTED IN CHINA 1100738233-DOM

7
Remote
• Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the
door.
• Insert two AAA (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw.
• If this product begins to operate erratically, you may need to reset the electronics. Remove the
batteries and reinstall.
1,5V x 2
C (LR14)
For longer life, use alkaline batteries.
Soother
• Loosen the screws in the battery compartment door with a Phillips screwdriver and remove
the door.
• Insert two C (LR14) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the soother will require replacement
more often than the batteries in the remote. When sounds or lights become faint or stop, it’s time
for an adult to change the batteries.
Battery Installation
1,5V x 2
AAA (LR03)
F
or
l
on
g
er
lif
e,
u

8
Mobile Crib Attachment
• Position the base so that the decorated side faces the inside of the crib.
• Fit the base onto the crib top rail.
• Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through the
crib rails.
• Buckle the straps. Make sure you hear a “click”.
Crib Top Rail
• Make sure the straps are tightened securely around the crib rail. Pull the free end of the strap to
tighten on the rail.
• To loosen the strap for removal, push the tab under the buckle and pull the buckle up.
Base
Buckles
Buckles
1
2
PULL
PULL
PUSH
PUSH
PULL
PULL

9
Mobile Crib Attachment
• Tie the base strings to a crib spindle.
Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied.
Mattress
Mattress
At Least 7 Inches (18 cm)
At Least 7 Inches (18 cm)
Bottom of Base
Bottom of Base
3
• If the distance between the base and the mattress is less than 7 Inches (18 cm), lower the
crib mattress.
4

10
• In the unlikely event that use of the remote
interferes with normal use of other remote
controlled equipment, such as televisions or
stereos, or use of other electronic or battery
powered appliances interfere with operation of
the mobile, do not use both at the same time.
• You may notice a loss of range between the
remote and the soother when using in bright
light. For best performance, avoid using the
remote in areas of bright light. Move the
soother or reduce the amount of light to
improve performance.
• Position the soother so that the back points
towards the area that the remote will be used.
Make sure there is a clear path between the
remote and the soother. Point the end of the
remote toward the back of the soother and
press the button.
• The soother is designed to go into sleep mode
after approximately 48 hours. If the soother
does not respond to the remote:
- slide the power/volume switch off and back
on, or
- press a button on the soother, or
- replace the batteries in the soother, or
- replace the batteries in the remote.
Remote Use Control Panel Use
• Press the power button to turn the soother
ON. Press the power button again to turn the
soother OFF.
• Press the motion button to turn mobile
motion ON. Press the button again to turn
motion and projection OFF. Press the motion
button again to turn on motion only.
Hint: The motion only works in crib mobile
mode. In dresser top mode, the motion button
will only turn projection lights on or off.
• Press the projection button to turn
projection lights ON. Press the projection
button again to turn projection lights OFF.
• Press the music button to start a song.
Press the music button again to change the
song. Press and hold the music button to turn
music OFF.
• Press the sound selection button to turn on
nature sounds. Press the sound selection
button again to turn on white noise. Press and
hold the sound selection button to turn sound
effects OFF.
• Press the volume button to adjust the
volume level.
Hint: Motion/projection time out after
approximately 10 minutes. Music/sounds time
out after approximately 30 minutes. Press
the power button or the remote to restart the
soother.
• Press the button on the remote to start or
change music/sounds.