Fisher-Price K6075 User manual

K6075
www.fisher-price.com/uk

Questions?
If you are missing parts or need assistance, we can help!
GREAT BRITAIN: Mattel UK Ltd,Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive,Albany 1331,Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,Tsimshatsui, HK, China.
www.service.mattel.com/uk
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052 U.S.A. PRINTED IN CHINA
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. K6075pr-0726

Parts
Tank
Seat
Toilet Paper Roll
Base
Removable Bowl
Deflector Shield
Removable Bowl
Clean-up
• Carefully remove the bowl and empty the contents into
a toilet.Wash and rinse the bowl. Replace the bowl.
• If desired, a solution of household disinfectant can also
be used. Rinse with clean water to remove soap residue.
Do immerse this product.
3

WARNING
To prevent injury from falls, never stand on
this product.
1
Connectors
2
Tank
Seat
Consumer Information
IMPORTANT! Please keep these instructions for future
reference, as they contain important information.
• Please read these instructions before assembly and use of
this product.
• Requires three “C” (LR14) alkaline batteries for operation
(not included).
• Adult assembly is required.Tool needed for battery
installation: Phillips screwdriver (not included).
• Do not use this product on a padded toilet seat.
• Fit the connector on the seat into the connector on the tank.
Hint: If the connectors don't fit together easily, do not force
them.Turn one of the connectors over and try again!
IMPORTANT! Before attaching the tank to the seat, be sure
you fasten the connectors. Follow the instructions in step 1.
• Insert and “snap” the tabs on the tank into the slots in
the seat.
Assembly
4

3
Tabs
Base
Slots
4
Hole
Toilet Paper Roll
• Insert and “snap” the tabs on the seat into the slots in
the base.
Hint: The seat/tank assembly is designed to be removed
from the base for use on a regular toilet. Please refer to the
instructions on page 8 to remove the base.
• Insert and “snap” the end of the toilet paper roll into the
hole in the side of the tank.
Assembly
1,5V x 3
“C” (LR14)
Shown Actual Size
• Locate the battery compartment on the back of the tank.
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Lift to remove the battery
compartment door.
• Insert three “C” (LR14) alkaline batteries as indicated inside
the battery compartment.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
Hint: We recommend using alkaline batteries for longer
battery life.
Battery Installation
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).
5

Removable Bowl
1
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product.To
avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use.Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removeable, rechargeable batteries are used, they are only
to be charged under adult supervision.
• Fit the bowl into the base.
• If desired, attach the deflector
shield for use with boys. Fit the
deflector shield into the seat and push down.
Power Switch
2Back View
Lid
• Slide the power switch ON .
Hint: Slide the power switch OFF when not using the
potty for a long period of time.
• Open (or close) the lid on the seat. Listen to fun phrases
or sound effects!
Battery Safety Information
Deflector Shield (Optional)
Fun to Learn Potty
6

Fun to Learn Potty
3
4
• Have your child sit down on the seat – sing-a-long!
• Motion (created when your child sits on the seat) turns the
“ready sensor” ON. If your child sits on the seat for more
than five minutes and does not move, the “ready sensor”
goes into sleep mode and turns off. If this should happen,
simply tell your child to lean forward and then sit back
(or simply move!) to turn power ON and sing-a-long!
• When your child goes potty, listen to a fun reward!
Hint: If your child does not hear a reward after going potty:
• The batteries may be weak or dead or you may need
to reset the electronics. Please remove the batteries and
replace with three, new alkaline batteries.
• The “ready sensor” may have turned off. Be sure your child
activates the “ready sensor” by moving every five minutes.
• The “ready sensor” detects contrast in lighting. If your
child eliminates a very small amount of urine, the “ready
sensor” may not recognize the change and your child will
not hear a reward.
Flusher
Toilet Paper Roll
5
• It’s toilet paper time.Turn the toilet paper roll for a fun song!
• Now, flush the toilet, listen and sing-a-long – Hurray!
7

2
PRESS
1
PRESS
PRESS
PRESS
Training Seat
IMPORTANT! We do not recommend using the seat on a
padded toilet seat.The seat seat/tank assembly will not fit
securely on a padded toilet seat and may damage it.
• Make sure the standard toilet seat is down. Fit the seat/tank
assembly onto the toilet seat.
• Pull up on the seat/tank to be sure it is secure.
• Turn the potty on its side.
• Press the tabs in the slots.
• Remove the base from the seat/tank assembly.
8