75
Locate the top side of the motorcycle white connector.
6
Insert the new footboard assembly black terminal into the slots in
the motorcycle white connector.
Slide the new footboard assembly back onto the motorcycle.
Make sure the top (shown) and bottom (not shown) tabs insert
into the slots on the motorcycle.
Top Tab
8
Re-insert the screws into the new footboard assembly. Tighten the
screws with a Phillips screwdriver. Do not over-tighten.
IMPORTANT! Test the operation of the new foot pedal. Press the
foot pedal down. The motorcycle should move. If the motorcycle
does not move, you have incorrectly assembled the new footboard
or your battery needs to be re-charged. Please re-read these
instructions and re-assemble the footboard correctly. Or, refer to
your motorcycle Owner’s Manuel for instructions on how to charge
your battery.
Replace Screws
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in USA
©2008 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 74290pr-0922
Slot
TOP VIEW
Footboard Replacement Instructions
If you have further questions, please contact Fisher-Price®
Consumer Relations at 1-800-348-0751, M–F 9AM to 7PM, Sat 11AM
to 5PM (EST) or visit us online at www.service.fisher-price.com.
Write to us Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470.
