Fishman CLÁSICA II User manual

USER GUIDE
CLÁSICA II ONBOARD PREAMP
www.fishman.com

2
Clásica II Quick Start
1. Set the controls • Set volume off and bass and treble controls to center.
2. Plug in • Connect the Clásica II to your amplifier or PA with a ¼-inch instru-
ment cable. The batt light will flash once quickly to indicate it has switched on.
3. Tune up • Press the tuner button. When it’s on, the tuner mutes the
signal. Press again to exit.
4. Turn up • Raise the volume and adjust the bass and treble controls to your
liking.

3
Controls
Volume • For the cleanest signal, set the volume knob as high as possible,
without causing distortion or feedback.
Bass • Boost here to add depth and weight to the sound of the guitar.
Treble • Boost to cut through the mix. Cut to mellow and subdue the sound.
Phase • Use the phase switch to improve bass response at low volume and
suppress feedback at high volume.
Tu n e • Use the tuner lights as shown below to tune your instrument.
When the batt lamp lights steadily it is time to change the battery. To conserve
the battery, unplug the instrument and turn off the tuner when not in use.
“A” note
below pitch
“A” note
in tune
“A” note
above pitch
“A#” note
in tune

www.fishman.com
513-300-155 Rev A 4-09