FJK home products 49" BLOW MOLED SQUARE PICNIC TABLE... User manual

CUSTOMER SERVICE
M-F 9:00AM-4:00PM CDT
Phone:[phone]
Email:[email protected]
Website:fjkhomeproducts.com
MADE IN CHINA
AFTER SALES SUPPORT P6 AFTER SALES SUPPORT P1
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
49" BLOW MOLED SQUARE PICNIC TABLE
STYLE#: QT-5924-03

PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com
Part List
Ste
p
1:
1. Place table top (A) upside down on a clean, dry, soft surface.
2. Use Short Screws (H) to attach each "U" Foot Stand (C) to the underside of
the table top as indicated in the drawing.
3. Please tighten screws firmly BEING CAREFUL NOT TO OVER TIGHTEN
SCREWS to prevent damage to product.
AFTER SALES SUPPORT P2 AFTER SALES SUPPORT P3
PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
"U" Foot Stand
G Medium Screw
F Long Screw 8
B Bench Seat 4
C
Drawing Q'ty
A Table Top 1
Part Description
4
1
D"L" Foot Stand 4
4
H Short Screw 12
E Link Stand
IWasher 12
J Allen Wrench 1

Step2：Step3：
1. Using Medium Screws (G), attach the Link Stand (E) onto the "U" Foot Stand (C ) 1. Using Long Screws (F) attach the "L" Foot Stand (D) to the "U" Foot Stand (C),
as indicated in the drawing. Place a Washer (I) between the Medium Screws (G) placing the Washer (I) between the Long Screw (H) and the "U" Foot Stand (C)
and the "U" Foot Stand. as indicated in the drawing.
2. Please tighten screws firmly BEING CAREFUL NOT TO OVER TIGHTEN SCREWS 2. Please tighten screws firmly BEING CAREFUL NOT TO OVER TIGHTEN SCREWS
to prevent damage to product. to prevent damage to product.
AFTER SALES SUPPORT P4 AFTER SALES SUPPORT P5
PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Step4：
1. Using Short Screws (H), attach the Bench Seat (B) to the "U"Foot Stand and
the "L" Food Stand as indicated in the drawing.
2. Please tighten screws firmly BEING CAREFUL NOT TO OVER TIGHTEN
SCREWS to prevent damage to product.
3. Turn picnic table right side up when assembly is completed.
You may now enjoy your new picnic table!
AFTER SALES SUPPORT P6 AFTER SALES SUPPORT P7
PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com PHONE:[phone] EMAIL:[email protected] WEBSITE:fjkhomeproducts.com
Assembly Instructions.
number listed at the bottom of each page of
To avoid serious personal in
j
ur
y
or dama
g
e, pleas
e
comply to the following warnings:
1. NEVER sit or stand on this table. It could tip
over causing you to fall.
2. In case of missing or initially defective parts,
please call the AFTER SALES SUPPORT
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
WARNING