UPC Post It User manual

ASSEMBLY INSTRUCTIONS
UPC #1416 UPC - Post It
Page 1 of 4
Revised 04/29/20
Finished Display
Thank you for your purchase of one of many fine products designed & manufactured by UPC.
We have made every effort to make your assembly easy, clear & hassle free. For more information
or if you have any questions contact customer service at 1-800-859-7442.
upcdisplays.com
PART Quantity Reference
Hook 16 C
Base 1 D
To we r 1 E
Header Clip 1 F
PART Quantity Reference
Screw 4 A
Wood Dowel 2 B
PARTS LIST
PARTS BAG
TOOLS REQUIRED: #2 Phillips Screwdriver
Header not included
A B
C
F
D
E

Page 2 of 4
ASSEMBLY
upcdisplays.com
1
2
B
D
E
D
E
A
Push (2) Wood Dowels (B) into
the larger holes on the bottom of
Tower (E). Then push the larger
holes in Base (D) onto the
(2) Wood Dowels (B).
Screw in (4) Screws (A) through the
holes on the bottom of Base (D) into
Tower (E). Set display in location
upright.

Page 3 of 4
ASSEMBLY
upcdisplays.com
3
C
D, E
Insert (16) Hooks (C) per Planogram
into the holes in the sides of
Tower Assembly (D,E) at an angle
and swing down as shown.

Page 4 of 4
ASSEMBLY
upcdisplays.com
4
5
D, E
F
F
F
Insert Header into
Header Clip (F).
(Header not included.)
Remove protective adhesive layer
from the bottom of Header Clip (F).
Attach Header Clip (F) to
Tower Assembly (D, E).