FJK home products XL2013A-RCK-ST User manual

P6 P1
Log Rocker Chair
MODEL#XL2013A-RCK-ST
User Guide
CUSTOMER SERVICE
M-F 9:00AM-4:00PM CDT
Phone: [phone]
Email: [email protected]
Website: fjkhomeproducts.com
MADE IN CHINA
WARRANTY
This item is warranted to be free from defects in material and
workmanship for a period of 90 days.

P2 P3
INSTRUCTION & PARTS
READ AND SAVE THESE INSTRUCTION
Please read instruction carefully and identify all the parts before assembly.
※ Caution : Small parts like plastic caps and bolts, may pose a choking hazard to young children.
Keep out of reach of small children.
PAR T LISTS
HARDWARE BAG: XL2013A-RCA-HB
STEP 1: Insert the Back (1) into the pre-
drilled holes on the Seat (4) , and secure
with two pieces Screws (C) 3.5 x 40mm,
as shown in Figure 1.
ASSEMBLY INSTRUCTION
Figure 2
STEP 2: Insert the Back Leg (7) into the
pre-drilled holes on Front Leg (2) and
secure them with two pieces Screws (C)
3.5x40mm. Place the Armrest (5) on the
assembled leg frame; secure them with
two pieces Screws (C) 3.5x40mm.
Connect the Runner (3) to the assembled
Legs (7) (2) with four pieces Bolts (A).
Please kindly refer to Figure 2.
Figure 1

P4 P5
STEP 4: Attach two pieces Support Bar (6) to the
Seat (4) and Front Leg (2), secure them with four
pieces Screws (C) 3.5x40mm. Please kindly refer
to the Figure 4. Now you can enjoy your log rocker
chair.
ASSEMBLY INSTRUCTION CARE & MAINTENANCE
Thanks for choosing our log rocker chair. This product is made of
Chinese fir wood. The wood has been kiln dried in a two-step process.
First, the raw wood material used for this product has been kiln dried and,
second the wood is kiln dried again after construction. Fir wood has high
moisture content and although it has been kiln dried twice, the product
may absorb more moisture during the seasonal humidity and
temperature changes. This may cause the wood to expand and contract
causing cracks to appear. This is a natural occurrence and is to be
expected.
Figure 4
STEP 3: Connect the Seat (4) to the finished
leg frame with four pieces Screws (C).
Connect the Back (1) to the armrests with two
pieces Bolts (B). Please kindly refer to the
Figure 3.
Figure 3