FJK home products DKW-635-SPC User manual

P4 P1
Steel Spring Chair
MODEL#DKW-635-SPC
User Guide
CUSTOMER SERVICE
M-F 9:00AM-4:00PM CDT
Phone: [phone]
Email: [email protected]
Website: fjkhomeproducts.com
MADE IN CHINA
WARRANTY
This item is warranted to be free from defects in material and
workmanship for a period of 90 days.

P2 P3
INSTRUCTION & PARTS
READ AND SAVE THESE INSTRUCTION
Please read instruction carefully and identify all the parts before assembly.
※ Caution : Small parts like plastic caps and bolts, may pose a choking hazard to young children.
Keep out of reach of small children.
PART LISTS
HARDWARE BAG
Note: Attach the Seat & Back (B) to the Armrest & Leg (A) with Bolts (C),
Washers (D) and Nuts (E) with Driver (AA) and Hex Wrench (BB) as
shown in Figure 1.
Tighten all the bolts and nuts when you finish assembly.
Now please enjoy your new spring chair.
Caution: please do not stand on the chair or lean over the back.
ASSEMBLY INSTRUCTION
AB
Armrest & Leg
Ax1
Seat & Back
Bx1
Bolt (M6X65mm) Washer Nut Driver
CDEAA
Cx4 Dx4 Ex4 AA x1
Figure 1
Hex Wrench
BB
BB x1