FJK home products DKW-BAC User manual

P6 P1
Bar Chair
MODEL#DKW-BAC
User Guide
CUSTOMER SERVICE
M-F 9:00AM-4:00PM CDT
Phone: [phone]
Email: [email protected]
Website: fjkhomeproducts.com
MADE IN CHINA
WARRANTY
This item is warranted to be free from defects in material and
workmanship for a period of 90 days.

P2 P3
INSTRUCTION & PARTS
READ AND SAVE THESE INSTRUCTION
Please read instruction carefully and identify all the parts before assembly.
※ Caution : Small parts like plastic caps and bolts, may pose a choking hazard to young children.
Keep out of reach of small children.
PAR T LISTS
ASSEMBLY INSTRUCTION
ABC
Seat
Ax1
Leg Base
Bx1
Back
Cx1
D
Armrest
Dx2
EFG
Steel Washer
Ex1
Connector
Fx4
Spring Plate
Gx2
HARDWARE BAG
HIJ
Bolt (M6x50mm)
Hx6
Bolt (M6x16mm)
Ix2
Bolt (M8x30mm)
Jx8
K
Nut
Kx8
LMN
Hex Wrench
Lx16
Washer
Mx1
Driver
Nx1
ASSEMBLY INSTRUCTION
Figure 1
STEP 1: Place the Leg Base (A) on a
flat surface. Attach the Connector (E)
as shown in Figure 1.
J
F
G
M
K, L
STEP 2: Attach the Steel Washer (F)
and Spring Plate (G) to the Connector
(E) with Bolts (J), Nuts (K) and Washer
(L) with Hex Wrench (M) as shown in
Figure 2.
Figure 2
E
A
E

P4 P5
ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION
STEP 4: Attach the Armrest (D) with
the Back & Seat (B, C) with Bolt (I)
and Washer (K) at the each side of
Back and with Bolt (H) and Washer
(K)at the each side of Seat as
shown in Figure 5.
Now please enjoy your new bar Chair.
Figure 3
STEP 3: Connect the support bar of Seat
(B) with the Steel Washer (F) on the leg
structure assembled by Step 2 with Bolts
(J), Nut (K) and Washer (L) as shown in
Figure 3.
STEP 4: Connect the Back (C) with
Seat (B) with Bolts (H) and Washer (L)
as shown in Figure 4.
Figure 4
Figure 5
J
K,L
B
F
H
L
C
B
N
I
L
D
H,K
Figure 6