FLACO FLACOblue60 User manual
www.flaco.de
FLACO Tank Technology
Initial operation / troubleshooting
of FLACOblue60
•Erection / de-aeration
•Configuration / diagnosis
•Servicing
www.flaco.de
Erection / de-aeration
Charge battery before first operation
Fill the canister with AdBlue / DEF
−Connect CDS adapter to 200 or 1000 Litre tank
−Insert nozzle into the 60 Litre canister
−Fill canister, use BOOST modus to speed up filling
−If ECU stops filling, connect CDS adapter to device canister
−Place A-adapter between nozzle and canister
−De-aerate system
−System is ready for use now!
www.flaco.de
Configuration / diagnosis
MENU AND SUB-MENU
Switch on the FLACOblue60
Press button “2” (RESET) until the password entry
window appears
Enter the password
Press button “2” (Reset) to jump to the next option
Press button “+” (3, BOOST) or “-“ (4, Func.) to
change configuration
www.flaco.de
Configuration / diagnosis
Check ring sensor and trigger
Press A-Adapter into the nozzle, pull trigger
Customer configuration and diagnosis
menu
password “234432”
Language English
Unit l
Voltage actual battery voltage
Ring sensor “o”= open, “x”= close
Quad sensor “o”= open, “x”= close
Pulse input “o”= open, “x”= close
www.flaco.de
Configuration / diagnosis
Check Quad sensor
Shorting two adjoining points
Customer configuration and diagnosis
menu
password “234432”
Language English
Unit l
Voltage actual battery voltage
Ring sensor “o”= open, “x”= close
Quad sensor “o”= open, “x”= close
Pulse input “o”= open, “x”= close
www.flaco.de
Configuration / diagnosis
Configuration menu, for internal use only
Configuration menu (only internal use) password “432234”
Restart time 1 s
Flow rate 3,5 l/min
Boost refuel 6,5 l/min
Refueling 2 s
Refill / Bleeding Of
Configuration menu (only internal use) password “223344”
Tankgröße 60 l
Abschaltzeit 5 min
Blinkfrequenz 1.5 Hz
Impulswert XXX I/l (according to calibration)
Automatik Aus
Differenz 1,0 l/n
Eichen
www.flaco.de
Configuration / diagnosis
Wiring
www.flaco.de
Thank you for your attention!
