Flash butrym LED PAR 36 RGB DMX User manual

www.flash-butrym.pl
LED
PAR 36 RGB DMX
User Manual
PAR 36 RGB DMX
User Manual
Page 1
PAR 36 RGB DMX

www.flash-butrym.pl Page 2
1. Package
Color Picker – 1pcs
Operation Instruction – 1pcs
2. Assembling
Hang the Color Picker on the frame and adjust to a right angle.
Connect signal wire. Plug one end of the signal wire into INPUT
socket on the rear of the projector system. The other end into
OUTPUT which is signal output of DMX 512. Feet 1, 2 and 3 of
signal input socket (1- Ground, 2- Data-, 3- Data+)
Please refer to the picture below.
3. Setup state of automation, method of dialing address:
ON OFF FUNCTION
1, 2, 3 4, 5, 6, 7, 8, 9, 10 RED lasting lighted
3, 4, 5 1, 2, 3, 7, 8, 9, 10 GREEN lasting
lighted
7, 8 1, 2, 3, 4, 5, 6, 9,
10
BLUE lasting lighted
7, 9 1, 2, 3, 4, 5, 6, 8,
10
Transform 7 colors
automatically
1,9 2, 3, 4, 5, 6, 7, 8,
10
Flash frequently from
red, green, blue

www.flash-butrym.pl Page 3
4. Setup state of DMX, method of dialing address:
ON OFF FUNCTION
1, 10 2, 3, 4, 5, 6, 7, 8, 9 Choose 1 channel
2, 10 1, 3, 4, 5, 6, 7, 8, 9 Choose 2 channel
1, 2, 10 3, 4, 5, 6, 7, 8, 9 Choose 3 channel
3, 10 1, 2, 4, 5, 6, 7, 8, 9 Choose 4 channel
….. …………………. As analogy, choose
the address as you
want
5. Setup synchronization state of principal and subordinate
machine, method for dialing address:
One set of host machine setup function by method of setting
auto state and dialing address. All other coordinate machines set
to DMX state on 1st channel. Each of the light should be
connected in series by connect wires.
6. DMX channels
Channels Function
Channel 1 Dimmer/ Strobe
Channel 2 Red
Channel 3 Green
Channel 4 Blue
7. Technical Features:
Voltage: AC220V-240V/ 50Hz-60Hz; Fuse: 0,5A
Power: 10W max at full intensity (full RGB)
Size: 19,5x 14x 14cm
Weight: 0,8kg