Flash Furniture SDA-AD723002-4-BK-GG User manual

Thank you for your purchase!
4-Piece Conversation Set with
Pillows & Metal Coffee Table
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of thecomponents from the packaging and set aside for
assembly. Assemble on a soft surface to prevent scratchingduring assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components mayresult.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (whereincluded) to help prevent the unit from tipping and
causing accidental injury, instability, death or damage. Thetipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall
Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
………………………………………………………………………………………………………………………………………………………………………………………
Customer Service Email: [email protected] | Phone: [phone]
SDA-AD723002-4-BK-GG
Online Assembly Instructions: http://ftp.flashfurniture.com/AssemblyInstructions/SDA-AD723002-4-BK-GG .pdf

Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-lasting consumer relationships. We strive toward
excellence in all we do and want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email address or phone number shown below to assist you with
any product questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any issues you may have.
Customer Service Email: [e-mail]
Customer Service Phone: [phone]
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product is warranted from the original purchase date and to the
original purchaser for normal usage, according to the below-referenced specifications and limitations.
•Non-moving metal parts are warranted for 5 years.
•Component parts including pneumatic cylinder, control mechanism, base and casters are warranted for 2 years.
•All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits specified for the product. In the absence of product-specific restrictions
and weight limits, normal usage means use for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if the
product is sold or otherwise transferred. Repairs made by parties other than Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence, alteration, assembly, installation, attachments, accident,
vandalism, acts of nature or any other event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of leather or fabric; (3)
cosmetic damage that may result from normal usage; (4) damage attributable to use by persons exceeding specified weight limits or commercial use
exceeding forty hours per week; or (5) rust or other damage caused by exposure to moisture. The user assumes all risk of injury resulting from use of
this product. Liability for incidental or consequential damage is excluded. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.

Part
Drawing
Description
QTY
Table Top
1 x
Table leg
4 x
M6 x 20 Screw
16 x
Washer Ring
16 x
Lock Washer
16 x
Allen Wrench
1 x
Parts List - Coffee Table Step 1 - Coffee Table
Table Top
Leg
M6x20 Screw
Lock Washer
Washer Ring
Allen Key STEP 1: Lay tabletop (Part 1) upside
down on a smooth clean surface.
Attach the 4 legs using (16) Washer
Rings (Part 4), (16) Lock Washers (Part
5), and (16) M6x20 Screws (Part 3).
Tighten with Allen Wrench

Part
Drawing
Description
QTY
Chair Seat
1 x
Chair Leg
4 x
M6 x 20 Screw
16 x
Washer ring
16 x
Lock Washer
16 x
Allen key
1 x
Parts List - Chair Step 1- Chair
Allen Wrench
Chair Leg M6x20 Screw
Lock Washer
Washer Ring
STEP 1: Lay Chair Seat (Part 1) upside down on a smooth
clean surface. Attach the 4 legs using (16) Washer Rings
(Part 4), (16) Lock Washers (Part 5), and (16) M6x20
Screws (Part 3). Tighten with Allen Wrench

Part
Drawing
Description
QTY
Loveseat
1 x
Leg
4 x
M6 x 20 Screw
16 x
Washer ring
16 x
Lock Washer
16 x
Allen key
1 x
Parts List - Loveseat Step 1 - Loveseat
STEP 1: Lay Loveseat (Part 1) upside
down on a smooth clean surface.
Attach the 4 legs using (16) Washer
Rings (Part 4), (16) Lock Washers (Part
5), and (16) M6x20 Screws (Part 3).
Tighten with Allen Wrench