Florence MyPackageBox User manual

Owner Guide
(Updated: August 2018)

Owner Guide
August 2018
www.florencemailboxes.com 2
Table of Contents
Getting to Know MyPackageBox™................................................................................................................................ 2
Using MyPackageBox™ ................................................................................................................................................. 3
User Access Code Setup for MyPackageBox™™ ........................................................................................................... 4
Parcel Carrier Special Instructions ................................................................................................................................ 5
MyPackageBox™ Warranty & Care ............................................................................................................................... 6
Getting to Know MyPackageBox™
Package deliveries to homes continue to grow as online purchases are now part of
our everyday lifestyle. MyPackageBox™ is a secure package receptacle designed
to help ensure your package deliveries stay safe and sound while you are away
from home. Packages can be delivered by any carrier company you use for online
order purchases.
Product Specifications & Highlights:
1. Available in multiple finish colors to complement your home’s architecture
2. Internal package compartment size is 34.5" High x 12” Wide x 15" Deep
3. Overall product dimensions are 37.25" High x 17.5” Wide x 17" Deep
4. Constructed of heavy aluminum and stainless steel components for
superior strength
5. Rugged, corrosion resistant powdercoat finish resists scratching and
vandalism
6. Resettable, push button combination lock provides homeowner and
delivery carrier easy access
7. Lock is battery powered - no electricity required
8. Avoid installing your MyPackageBox™ in locations directly exposed to
rain/snow
9. MyPackageBox™ designed to be recess mounted
See next page to find out how easy it is to setup and use MyPackageBox™.

Owner Guide
August 2018
www.florencemailboxes.com 3
Using MyPackageBox™
You can start using MyPackageBox™ in two simple steps
1) Setup your user access code on the digital combination lock*
2) In your next online order – include your MyPackageBox™ access code in the shipping address
Inserting carrier instructions in line #2 of the shipping address is recommended - see sample below:
First & Last Name
Line #1 – Address / House # & Street Name
Line #2 – Enter Code XXXX to open MyPackageBox [located on porch]
City, State & Zip Code
Packages are delivered using your MyPackageBox™ in a few quick steps – delivery carriers simply
1) Enter the user access code you provided in your online order shipping address
2) Open the MyPackageBox™
3) Deposit your package(s) inside
4) Close and turn the knob to lock the door
Repeat!
Additional package deliveries can be made as long as there is space in MyPackageBox™.
Retrieve your packages waiting securely for you in MyPackageBox™ by
1) Entering the same user access code to unlock the door
2) Retrieve your packages from the unit
3) Close and turn the knob to lock the door
* Please refer to page 4 for instructions on setting up your MyPackageBox™ resettable combination lock

Owner Guide
August 2018
www.florencemailboxes.com 4
User Access Code Setup for MyPackageBox™
Programming – Introduction
The CompX®RegulatoR®lock is easy to program and operate. Type the User Code (factory default 1234) and press
ENTER to lock or unlock the cabinet. Entering the Supervisor code allows you to change operating codes, modes
and restore lock settings.
Button locations, indicator lights and knob referenced in the programming instructions are shown below.
CLEAR button erases any key input made in error Indicator Lights
Green – indicates button input and valid code
Yellow - indicates low battery or program mode
Red – indicates incorrect entry
ENTER button is used to complete code entry
and begin programming
Knob is always rotated clockwise to unlock
Changing the User Access Code
To change the user access code on your lock, follow the steps below to enter programming mode.
NOTE: There is a 10 second programming time limit between each step. If the RegulatoR®times out or an
error is made, programming will end and you will need to enter programming mode again.
1. Place the RegulatoR®lock into programming mode.
a. Lock must be in the locked position prior to entering programming mode
b. Type supervisor code and press ENTER
•NOTE: Default supervisor code is 12345
c. Rotate knob to the unlocked position and press and hold ENTER for 3 seconds …yellow indicator light
will illuminate
d. With the yellow indicator light illuminated, programming can begin
2. Press 1 and then press ENTER.
3. Type the current user code and press ENTER
•NOTE: Factory default user code is 1234
4. Type the new user code and press ENTER
•NOTE: User codes must be 4 to 8 digits in length
5. Retype your new user code and press ENTER.
•If successful, the green indicator light will illuminate for 1 second
6. Continue programming or press 9 and then ENTER to exit programming
Your new user access code and MyPackageBox™ is ready for use!
See enclosed CompX RegulatoR® instruction booklet for more details or visit: http://compx.com/images/regulator_instruction_manual.pdf

Owner Guide
August 2018
www.florencemailboxes.com 5
Parcel Carrier Company Customer Options
Did you know that each of the major national parcel carrier companies offer free customer services that
allow you to provide written special instructions for package deliveries to your home?
The links below will take you to sections of the carrier websites where you can create special instructions
for your address that will help your carriers understand your needs as it relates to delivering packages to
you at home. While these types of instructions are not required for carriers to use MyPackageBox™ at
your home – we simply wanted to share this helpful package management information with you.
https://informeddelivery.usps.com/box/pages/intro/start.action
https://www.fedex.com/apps/fdmenrollment/

Owner Guide
August 2018
www.florencemailboxes.com 6
https://www.ups.com/us/en/services/tracking/mychoice.page
MyPackageBox™ Care & Warranty
The surface of MyPackageBox™ and all Florence powder coated products may be cleaned of dirt or grime with a
soft cloth dampened with any mild detergent or properly diluted biodegradable, water-based cleaner, such as
“Simple Green™”. Wipe from top to bottom to avoid run-down. Avoid use of abrasives, which might damage the
product surface. Rinse with plain water and dry. Avoid cleaning during extreme temperature conditions.
Florence provides a five (5) year Warranty on its products from the date of purchase from an Authorized Florence
Dealer. This Warranty covers defects in material and workmanship of any manufactured item and Florence will, at
its option, repair or replace a defective item or refund the price paid for the defective item. All claims must be
made promptly in writing and accompanied by a copy of the original invoice.
For more MyPackageBox™ product information visit: www.florencemailboxes.com/MyPackageBox