FLOVES RFCD-8006 User manual

RFCD-8006
USER MANUAL
Hair Clipper
EN

Thank you for purchasing FLOVES Hair Clipper
RFCD-8006. Please read this manual carefully
before using and keep this in a safe place for future
reference. Trimming Blade
Charging Indicator
Parts Identification
To reduce the risk of burns, fire, electric shock, or
injury to person:
WARNING
◆ Close supervision is required when this product
is used by, on, or near children, or persons with
limited physical, sensory, or mental capabilities or
invalids.
◆ Be sure to unplug the power adapter when
performing maintenance.
◆ Do not plug or unplug the power adapter with wet
hands.
◆ Do not modify, disassemble or repair this product
by yourself.
◆ Please keep the product and charging cord dry.
◆ Do not charge if the charger is damaged.
◆ Use this product for its intended household use as
described in this manual.
Power On/Off
Charging Port
Hanging hole
Comb*5 Cleaning
Brush
Charging
Cable
Lubricant
Oil
Accessories

Charging
●Make sure that the trimmer is turned o󽗈.
●Wipe o󽗈 any water droplets on the appliance
socket.
●Fully charge before use by plugging in USB cable.
●The charging time will take about 120 minutes (the
c h a r g i n g t i m e i s d e p e n d i n g o n t h e r a t e d v o l t a g e . )
＊ Charge only when needed
＊ DO not plug in USB cable with wet hands
＊ DO not damage, stretch, bend, or pull the charging
cable
Warning
●You cannot operate the trimmer while
charging.
●Charging or using the product at
temperatures below 40° F (4.5° C) or higher
than 95° F (35° C) adversely a󽗈ects the
lifespan of the battery.
●If the product is subjected to a major change
in temperature, pressure, or humidity, let the
product acclimatize for 30 minutes before
use.
NOTE
Align the sides of the grooming length
with the grooves on the underside
of the comb and slide it into place.
Be sure to slide the comb onto the
grooming head completely
*lf the attachment is not attached
correctly, it may shift and end up
cutting too much during use
Firmly grasp the main body with
one hand, lightly pull to remove the
attachment with the other hand
Mounting the attachment
Removing the attachment
HOW TO USE
1.Choose the appropriate attachment as needed.
2.Press the On/O󽗈 button to switch on the device.
3.Trim.

Disposal of Old Equipment and
Batteries
Only for European Union and countries with
recycling systems
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Note for the battery symbol (bottom symbol)
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries must not be
mixed with general household waste.
For proper treatment, recovery and recycling of
old products and batteries, please take them to
applicable collection points in accordance with your
national legislation.
Cleaning, Care and Maintenance
1.Always clean shaving head regularly to ensure maximum
performance and a proper operating life.
2.Never use abrasive cleaning agents or aggressive liquids
such as gasoline or acetone to clean the product.
3.Do not tap the product or blade to remove remained
hairs and water as this may cause damage to the product
and blade.
4.Apply the oil to the blade before and after each use.
5.Make sure the product and attachments are completely
dry before you store them for the next use.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.