Fluidmesh FM3500ENDO User manual

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
Ip66 testing - product preparation
FM3500ENDO
1. Open the bottom housing and install the RJ45 Plugs.

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
2. Assemble the bottom housing to top housing, tighten the screws.
3. Check/tighten the cable gland nut.
Cable!gland!nut!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
4. Install the rubber seal of cable gland.
Seal!of!cable!gland!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
5. Tighten the hexagon nut of cable gland.
Hexagon!nut!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
6. Check/tighten the round nuts of SMA connectors.
Round!nuts!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
7. Put the SMA rubber sleeves on the SMA connectors.
SMA!rubber!sleeves!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM3500ENDO SMA Plug Installation Recommendation

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
1. Remove the SMA rubber sleeves, fasten the SMA plug.
2. Apply the heat-shrinkable tube on the SMA connectors.
Heat-shrinkable!
tube!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM4500MOBI
1. Check/Tighten the hexagon of M12 A-coded/M12 X-coded connectors.
Hexagon nuts!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
2. Tighten the caps of M12 A-coded/M12 X-coded connectors.
Caps!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
3. Check/tighten the round nuts of QMA connectors.
Round!
nuts!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
4. Put the QMA rubber sleeves on the QMA connectors.
QMA!rubber!sleeves!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM4500MOBI M12 A coded 5 pins Plug Installation Recommendation

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
M12 A coded 5 pins Plug Installation Recommendation
1. Remove the plastic cap.
2. Install the M12 A coded 5 pins Plug, the plug must be fully tightened in the
M12 connector.
3. Before fastening the plastic cap back to the M12 connector, recommended
wrapping seal tape around the thread on the M12 connector to prevent the water
leaked issues.

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM4500 MOBI M12 X coded 8 pins Plug Installation Recommendation

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
1. Remove the plastic cap.
2. Install the M12 X coded 8 pins Plug, the plug must be fully tightened in the
M12 connector.

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM4500MOBI QMA Plug Installation Recommendation

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
1. Remove the QMA rubber sleeves, fasten the QMA plug.
2. Apply the heat-shrinkable tube on the QMA connectors.
Heat!rubber!sleeves!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
FM4500FIBER
1. Check/Tighten the hexagon nuts of M12 A-coded/M12 X-coded connectors.
Hexagon nuts!

HEADQUARTERS.
81 PROSPECT ST.
BROOKLYN,
NY,11201, U.S.A.!
FAX.
[phone]
TELEPHONE.
[phone]!
EMAIL.
[e-mail]
WEB.
FLUIDMESH.COM!
!
!
2. Tighten the Caps of M12 A-coded/M12 X-coded connectors/XCO flange.
3. Check/tighten the screw of reset switch hole.
Screw!of!reset!switch!hole!