Fluke 5790b/3 User manual

5790A

AC Measurement Standard

Operators Manual

PN 893284

January 1992 Rev.4, 8/12

All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and

service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and

services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of

a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in

Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal

conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with

its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke

does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers

only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is

available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the

applicable international price. Fluke reserves the right to invoice Buyer for importation costs of

repair/replacement parts when product purchased in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair,

or replacement of a defective product which is returned to a Fluke authorized service center within the

warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that service center, with a description of the difficulty,

postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following

warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke

determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal

condition of operation or handling, including overvoltage failures caused by use outside the product’s

specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair

costs and obtain authorization before commencing the work. Following repair, the product will be returned to

the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges

(FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES,

INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or

limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not

apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other

decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other

provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

To register your product online, visit register.fluke.com

Declaration of the Manufacturer or Importer

We hereby certify that the Fluke Model 5790A is in compliance with BMPT Vfg 243/1991 and is RFI

suppressed. The marketing and sale of the equipment was reported to the Central Office for

Telecommunication Permits (ZZF). The right to retest this equipment or verify compliance with the

regulation was given to the ZZF.

Bescheinigung des Herstellers/Importeurs

Hiermit wird bescheinigt, daB Fluke Modell 5790A in Übereinstimmung mit den Bestimmungen

der BMPTAmtsblVfg 243/1991 funk-entstört ist. Dem Zentralamt fur Zulassungen im

Femmeldewesen wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur

Überprüfung der Serie auf die Einhaltung der Bestimmungen eingeräumt.

Fluke Corporation

INTERFERENCE INFORMATION

This equipment generates and uses radio frequency energy and if not installed and used in strict

accordance with the manufacturer's instructions, may cause interference to radio and television

reception. It has been type tested and found to comply with the limits for a Class B digital device in

accordance with the specifications of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference in a residential installation.

Operation is subject to the following two conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause

undesired operation.

There is no guarantee the interference will not occur in a particular installation. If this equipment

does cause interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient the receiving antenna

•Relocate the equipment with respect to the receiver

•Move the equipment away from the receiver

•Plug the equipment into a different outlet so that the computer and receive are on different

branch circuits

If necessary, the user should consult the dealer or an experienced radio/television technician for

additional suggestions. The user may find the following booklet prepared by the Federal

Communications Commission helpful: How to Identify and Resolve Radio-TV Interference

Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC

20402. Stock No. 004-000-00345-4.

SAFETY TERMS IN THIS MANUAL

This instrument has been designed and tested in accordance with IEC publication

1010-1 (1992-1), Safety Requirements for Electrical Measuring, Control and Laboratory

Equipment, and ANSI/ISA-S82.01-1994, and CAN/CSA-C22.2 No. 1010.1-92. This User

Manual contains information, warning, and cautions that must be followed to ensure safe

operation and to maintain the instrument in a safe condition. Use of this equipment in a

manner not specified herein may impair the protection provided by the equipment.

This instrument is designed for IEC 1010-1 Installation Category II use. It is not designed

for connection to circuits rated over 4800 VA.

WARNING statements identify conditions or practices that could result in personal injury

or loss of life.

CAUTION statements identify conditions or practices that could result in damage to

equipment.

SYMBOLS MARKED ON EQUIPMENT

WARNING Risk of electric shock. Refer to the manual (see the Index for

references).

GROUND Ground terminal to chassis (earth).

Attention Refer to the manual (see the Index for references). This

symbol indicates that information about usage of a feature is contained in

the manual.

AC POWER SOURCE

The instrument is intended to operate from an ac power source that will not apply more

than 264V ac rms between the supply conductors or between either supply conductor

and ground. A protective ground connection by way of the grounding conductor in the

power cord is required for safe operation.

USE THE PROPER FUSE

To avoid fire hazard, for fuse replacement use only the specified unit: 100 or 120 V

operation, 2 ampere/250 volt time delay; 200 or 240 V operation, 1 ampere/250 volt time

delay.

GROUNDING THE INSTRUMENT

The instrument utilizes controlled overvoltage techniques that require the instrument to

be grounded whenever normal mode or common mode ac voltages or transient voltages

may occur. The enclosure must be grounded through the grounding conductor of the

power cord, or through the rear panel ground binding post.

USE THE PROPER POWER CORD

Use only the power cord and connector appropriate for the voltage and plug

configuration in your country.

Use only a power cord that is in good condition.

Refer power cord and connector changes to qualified service personnel.

DO NOT OPERATE IN EXPLOSIVE ATMOSPHERES

To avoid explosion, do not operate the instrument in an atmosphere of explosive gas.

DO NOT REMOVE COVER DURING OPERATION

To avoid personal injury or death, do not remove the instrument cover without first

removing the power source connected to the rear panel. Do not operate the instrument

without the cover properly installed. Normal calibration is accomplished with the cover

closed. Access procedures and the warnings for such procedures are contained both in

this manual and in the Service Manual. Service procedures are for qualified service

personnel only.

DO NOT ATTEMPT TO OPERATE IF PROTECTION MAY BE IMPAIRED

If the instrument appears damaged or operates abnormally, protection may be impaired.

Do not attempt to operate the instrument under these conditions. Refer all questions of

proper instrument operation to qualified service personnel.

Table of Contents

Chapter Title Page

1 Introduction and Specifications......................................................... 1-1

1-1. Introduction........................................................................................... 1-3

1-2. Inside the 5790A .............................................................................. 1-3

1-3. Measurement and Transfer Modes ................................................... 1-3

1-4. An Overview of the Features............................................................ 1-4

1-5. Instruction Manuals .............................................................................. 1-5

1-6. 5790A Operators Manual ................................................................. 1-5

1-7. 5790A Remote Programming Reference Guide ............................... 1-5

1-8. 5790A Service Manual ..................................................................... 1-5

1-9. Wideband Module (Option 5790A-03)................................................. 1-5

1-10. Current Shunt Adapters ........................................................................ 1-6

1-11. Warranty and Service Information........................................................ 1-6

1-12. Specifications........................................................................................ 1-6

2 Installation ........................................................................................... 2-1

2-1. Introduction........................................................................................... 2-3

2-2. Unpacking and Inspection .................................................................... 2-3

2-3. Environmental and Input Requirements ............................................... 2-4

2-4. Cooling Considerations......................................................................... 2-4

2-5. Placement and Rack Mounting ............................................................. 2-5

2-6. Accessing the Fuse................................................................................ 2-5

2-7. Selecting Line Voltage.......................................................................... 2-6

2-8. Connecting to Line Power .................................................................... 2-6

3 Features ............................................................................................... 3-1

3-1. Introduction........................................................................................... 3-3

3-2. Front Panel Features ............................................................................. 3-3

3-3. Rear Panel Features .............................................................................. 3-3

4 Front Panel Operation......................................................................... 4-1

4-1. Introduction........................................................................................... 4-3

4-2. Turning on the 5790A........................................................................... 4-3

4-3. Power-Up State................................................................................. 4-3

5790A

Operators Manual

4-4. Warmup Requirements..................................................................... 4-4

4-5. Calibrating DC Zeros ....................................................................... 4-5

4-6. Connecting Sources to the 5790A ........................................................ 4-6

4-7. Test Leads and Connectors............................................................... 4-6

4-8. Coaxial Inputs .............................................................................. 4-6

4-9. Dual Banana Inputs...................................................................... 4-6

4-10. Connecting the Guard and Ground Binding Posts ........................... 4-7

4-11. Guard Theory ............................................................................... 4-8

4-12. Guard Connection ........................................................................ 4-8

4-13. External Guard Connection.......................................................... 4-10

4-14. Operating Instructions for all Modes .................................................... 4-11

4-15. Interpreting the Measurement Display ............................................. 4-11

4-16. Using the Measurement Control Menu ............................................ 4-12

4-17. Digital Filter Mode Softkey ......................................................... 4-13

4-18. Digital Filter Restart Softkey ....................................................... 4-13

4-19. Hi Res Softkey ............................................................................. 4-14

4-20. Selecting Auto or Locked Range...................................................... 4-14

4-21. Selecting Continuous or External (Single) Trigger .......................... 4-15

4-22. Instructions for Measurement Mode..................................................... 4-15

4-23. Instructions for Transfer Mode ............................................................. 4-16

4-24. Measuring Frequency Flatness with the Wideband Option.............. 4-16

4-25. Using the Shunt Input for Relative Current...................................... 4-17

4-26. Choosing Delta Units ....................................................................... 4-19

4-27. Establishing a Reference .................................................................. 4-19

4-28. Using the Top-Level Menu Keys.......................................................... 4-21

4-29. [VIEW REF] Key ............................................................................. 4-21

4-30. [UTIL MENUS] Key........................................................................ 4-22

4-31. Checking Instrument Configuration ................................................. 4-23

4-32. Setup Menu....................................................................................... 4-24

4-33. Format Eeprom Menu .................................................................. 4-25

4-34. Setting the Internal Clock............................................................. 4-26

4-35. [SPEC] Key ...................................................................................... 4-27

4-36. Techniques for Reducing Transfer Errors............................................. 4-27

4-37. DC Reversal...................................................................................... 4-27

4-38. Loading............................................................................................. 4-28

4-39. Mechanical Contact .......................................................................... 4-28

4-40. Thermal EMFs.................................................................................. 4-28

4-41. EMI................................................................................................... 4-28

5 Remote Operation ............................................................................... 5-1

5-1. Introduction........................................................................................... 5-3

5-2. Using the IEEE-488 Interface for Remote Control............................... 5-3

5-3. IEEE-488 Bus Restrictions............................................................... 5-3

5-4. IEEE-488 Bus Setup Procedure........................................................ 5-3

5-5. Using the Rs-232 Interface for Remote Control ................................... 5-4

5-6. Serial Remote Control Setup Procedure........................................... 5-4

5-7. Exceptions for Serial Remote Control.............................................. 5-6

5-8. Changing between Remote and Local Operation ................................. 5-6

5-9. Local State........................................................................................ 5-6

5-10. Local with Lockout State.................................................................. 5-6

5-11. Remote State..................................................................................... 5-7

5-12. Remote with Lockout State .............................................................. 5-7

5-13. Command Syntax Information.............................................................. 5-8

5-14. Parameter Syntax Rules.................................................................... 5-8

Contents (continued)

iii

5-15. Extra Space or Tab Characters ......................................................... 5-9

5-16. Terminators....................................................................................... 5-9

5-17. Incoming Character Processing........................................................ 5-10

5-18. Response Message Syntax................................................................ 5-10

5-19. Input Buffer Operation.......................................................................... 5-10

5-20. Using Commands.................................................................................. 5-12

5-21. Multiple Commands ......................................................................... 5-13

5-22. Sequential and Overlapped Commands............................................ 5-13

5-23. Commands that require the CALIBRATION STORE or MODE

Switch to be Enabled ....................................................................... 5-13

5-24. Long-Term Commands..................................................................... 5-13

5-25. Checking 5790A Status ........................................................................ 5-14

5-26. Serial Poll Status Byte (STB) ........................................................... 5-14

5-27. Service Request Line (SRQ) ........................................................ 5-14

5-28. Service Request Enable Register (SRE)....................................... 5-14

5-29. Programming the STB and SRE .................................................. 5-15

5-30. Event Status Register (ESR)............................................................. 5-17

5-31. Event Status Enable Register (ESE) ............................................ 5-17

5-32. Bit assignments for the ESR and ESE.......................................... 5-17

5-33. Programming the ESR and ESE................................................... 5-17

5-34. Instrument Status Register (ISR)...................................................... 5-19

5-35. Instrument Status Change Registers............................................. 5-19

5-36. Instrument Status Change Enable Registers................................. 5-19

5-37. Bit Assignments for the ISR, ISCR, and ISCE ............................ 5-19

5-38. Programming the ISR, ISCR, and ISCE ...................................... 5-20

5-39. Output Queue ................................................................................... 5-20

5-40. Error Queue ...................................................................................... 5-20

5-41. IEEE-488 Interface Configuration........................................................ 5-21

5-42. Bus Communication Overview............................................................. 5-22

5-43. Device-Dependent Commands ......................................................... 5-22

5-44. Common Commands ........................................................................ 5-22

5-45. Interface Messages ........................................................................... 5-22

5-46. Definition: Queries and Commands ................................................. 5-23

5-47. Functional Elements of Commands.................................................. 5-23

5-48. Interface Messages ........................................................................... 5-23

5-49. Remote Program Examples................................................................... 5-23

5-50. Writing an SRQ and Error Handler .................................................. 5-24

5-51. Taking a Measurement ..................................................................... 5-24

5-52. Efficiently Taking N Successive Readings ...................................... 5-25

5-53. Locking the 5790A Range................................................................ 5-25

5-54. Calibrating the 5790A Remotely...................................................... 5-25

5-55. The IEEE-488 Connector...................................................................... 5-27

6 Remote Commands............................................................................. 6-1

6-1. Introduction........................................................................................... 6-3

6-2. Alphabetical List of IEEE-488.2 Common Commands........................ 6-7

6-3. Alphabetical List of 5790A Device-Dependent Commands................. 6-13

7 Using the RS-232 Interface................................................................. 7-1

7-1. Introduction........................................................................................... 7-3

7-2. Serial Interface Specifications .............................................................. 7-3

7-3. Setting Up and Connecting the Serial Interface.................................... 7-4

7-4. Printing Calibration Reports ................................................................. 7-5

7-5. Sample Measurement Shifts Report ................................................. 7-6

5790A

Operators Manual

7-6. Sample Calibration Constants Report............................................... 7-12

8 Operator Maintenance......................................................................... 8-1

8-1. Introduction........................................................................................... 8-3

8-2. Accessing the Fuse................................................................................ 8-3

8-3. Cleaning the Air Filter .......................................................................... 8-4

8-4. General Cleaning .................................................................................. 8-4

8-5. Calibration ............................................................................................ 8-5

9 Options and Accessories ................................................................... 9-1

9-1. Introduction........................................................................................... 9-3

9-2. Wideband Module (Option 5790A-03)................................................. 9-3

9-3. Accessories ........................................................................................... 9-3

9-4. Fluke A40 and A40A Current Shunt Adapter (5790A-7001) .......... 9-3

9-5. Fluke A40A Current Shunt Adapter for Input 1 (792A-7004)......... 9-3

9-6. Low Thermal EMF Test Leads (5440A-7002)................................. 9-4

9-7. Rack Mount Kit (Y5737).................................................................. 9-4

9-8. Shielded IEEE-488 Interface Cables (Y8021, Y8022, and Y8023) . 9-4

9-9. RS-232-C Null-Modem Cables (Y1702 and Y1703) ....................... 9-4

Appendices

A Glossary of AC-DC Transfer Related Terms .............................................. A-1

B ASCII and IEEE-488 Bus Codes................................................................. B-1

C Calibration Constant Information................................................................ C-1

D 5790A Error Codes...................................................................................... D-1

E 5200A Verification and Calibration ............................................................ E-1

List of Tables

Table Title Page

2-1. Standard Equipment ............................................................................................... 2-3

2-2. Line Power Cord Types Available from Fluke ...................................................... 2-3

3-1. Front Panel Features............................................................................................... 3-4

4-1. Power-Up State Defaults and Volatility................................................................. 4-4

4-2. Nonvolatile Setup Parameter Factory Defaults ...................................................... 4-5

4-3. Input Test Lead Summary...................................................................................... 4-7

4-4. Input Impedance Summary .................................................................................... 4-7

4-5. Measurement Display Amplitude Resolution ........................................................ 4-11

4-6. Measurement Display Frequency Resolution......................................................... 4-11

5-1. Operating State Transitions.................................................................................... 5-8

5-2. Units Accepted in Parameters and Used in Responses .......................................... 5-9

5-3. Response Data Types ............................................................................................. 5-11

5-4. Status Register Summary ....................................................................................... 5-17

5-5. IEEE-488 Interface Function Subsets Supported................................................... 5-22

5-6. Functional Elements of Commands ....................................................................... 5-27

5-7. Interface Messages that the 5790A Accepts........................................................... 5-28

5-8. Interface Messages that the 5790A Sends.............................................................. 5-29

6-1. Command Summary by Function .......................................................................... 6-3

7-1. Serial Interface Parameter Choices ........................................................................ 7-4

9-1. Accessories............................................................................................................. 9-3

5790A

Operators Manual

vii

List of Figures

Figure Title Page

1-1. Dimensions............................................................................................................. 1-7

2-1. Line Power Cord Types Available from Fluke ...................................................... 2-4

2-2. Accessing the Fuse................................................................................................. 2-5

2-3. Line Power Label and Switch Location ................................................................. 2-7

3-1. Accessing the Fuse................................................................................................. 3-3

4-1. Recommended Test Lead Connections to Test a Voltmeter .................................. 4-9

4-2. Recommended Test Lead Connections to Test a Source ....................................... 4-10

5-1. Status Register Overview ....................................................................................... 5-16

5-2. Status Byte and SRE Bit Definitions...................................................................... 5-18

5-3. Bit Assignments for ESE and ESE......................................................................... 5-19

5-4. Bit Assignments for the ISR, ISCEs and ISCRs .................................................... 5-21

5-5. IEEE-488 connector pinout (Rear Panel View) ..................................................... 5-30

7-1. RS-232 Connector Pinout ...................................................................................... 7-3

8-1. Accessing the Fuse................................................................................................. 8-3

8-2. Accessing the Air Filter.......................................................................................... 8-4

5790A

Operators Manual

viii

1-1

Chapter 1

Introduction and Specifications

Title Page