Fluke 789 Owner's manual

Supplement
© 2013 Fluke Corporation. 
All rights reserved
Title: 789 Safety Info. Supplement Issue: 1
Print Date: August 2012 Issue Date: 1/13
Part Number: 4276668 Page Count: 1
Revision/Date:
This supplement contains information necessary
to ensure the accuracy of the above manual.

789 Safety Information Supplement
1/13 1
Change #1
Under Safety Specifications, replace the Symbols
table:
Symbols
Symbol Description
Risk of Danger. Important information. See Manual.
Conforms to European Union directives

Meets Underwriters’ Laboraories safety requirements

Inspected and licensed by TÜV Product Services
Hazardous voltage
Conforms to relevant Australian EMC requirements
Fuse
CAT II
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization points
(socket outlets and similar points) of the low-voltage
MAINS installation.
CAT III Measurement Category III is applicable to test and
measuring circuits connected to the distribution part of
the building’s low-voltage MAINS installation.
CAT IV Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
Conforms to relevant South Korean EMC Standards.
Conforms to relevant North American Safety Standards
Double Insulation
Alternating current
Direct current
Earth ground

This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic household
waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product
as unsorted municipal waste. Go to Fluke’s website for
recycling information.